Jukka Laitinen 191575eac1 imx9: Add proper initialization of the SD card with different bus speeds ... - Change the board's sd-card speed configuration to just specify the wanted frequency - Calculate the proper divisors in the driver - If the sd card frequency exceeds 25 MHz, set the card to high-speed mode This makes it easier to adjust the operating speed of the sd cards and fixes an error where cards are being operated in standard mode at over 25MHz speeds. If the speed is higher than 25MHz, the card needs to be set into high-speed mode. Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>		2026-02-16 10:52:04 -05:00
..
a64/pinephone	arch/arm64: fix compile error.	2026-01-16 20:26:14 +08:00
a527/avaota-a1	boards/arm64: nxstyle fix Relative files path	2025-10-29 22:04:25 +08:00
bcm2711/raspberrypi-4b	arm64: fix compile failed	2026-01-16 10:26:58 -05:00
fvp-v8r/fvp-armv8r	protect: move us_heap to userspace_data_s	2026-02-02 11:06:53 +08:00
imx8/imx8qm-mek	nuttx/boards/XXX/defconfig:DEV_ZERO is not set	2024-12-30 22:22:29 +08:00
imx9	imx9: Add proper initialization of the SD card with different bus speeds	2026-02-16 10:52:04 -05:00
qemu/qemu-armv8a	drivers/virtio and vhost: auto-select parent config from sub-drivers	2026-02-04 02:32:02 +08:00
rk3399	arch/arm64: fix compile error.	2026-01-16 20:26:14 +08:00
zynq-mpsoc/zcu111	arch/arm64: fix compile error.	2026-01-16 20:26:14 +08:00