Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-09-02 15:12:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 3
nuttx/arch/arm/src/sam34
History
Gregory Nutt f7ca98c5ae Fix error in almost all ARMv7-M interrupt stack handling
2015-09-14 07:07:13 -06:00
..
chip Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
chip.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Kconfig SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet 2015-07-03 09:33:52 -06:00
Make.defs arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)). 2015-08-31 08:40:02 -06:00
sam3u_gpio.h Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
sam3u_periphclks.h Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips 2014-02-22 10:38:25 -06:00
sam3x_gpio.h Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
sam3x_periphclks.h SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
sam4cm_freerun.c Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov 2015-05-26 08:09:10 -06:00
sam4cm_freerun.h SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
sam4cm_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4cm_oneshot.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_oneshot.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_supc.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4cm_supc.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_tc.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tc.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tickless.c Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
sam4e_gpio.h Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
sam4e_periphclks.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam4l_clockconfig.c Eliminate warnings 2015-09-08 10:20:41 -06:00
sam4l_gpio.c Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
sam4l_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4l_periphclks.c Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
sam4l_periphclks.h Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
sam4s_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4s_periphclks.h SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
sam_aes.c sam4cm: add CFB and MAC AES modes. From Max Neklyudov 2015-06-22 06:42:37 -06:00
sam_aes.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_allocateheap.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_clockconfig.c SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz 2015-06-11 14:35:49 -06:00
sam_clockconfig.h Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
sam_cmcc.c SAM4E CMCC: Fix some errors introducted in last check-in 2014-03-26 16:32:16 -06:00
sam_cmcc.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam_dmac.c Fix some common typos 2015-08-16 10:59:10 -06:00
sam_dmac.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_emac.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_emac.h SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
sam_gpio.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_gpioirq.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_hsmci.c Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1. 2015-09-01 13:47:06 -04:00
sam_hsmci.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_irq.c All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa 2015-08-21 08:42:24 -06:00
sam_lowputc.c Fix some warnings/errors detected by nuttx/tools/testbuilds.sh 2015-07-10 18:41:26 -06:00
sam_lowputc.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_mpuinit.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_mpuinit.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam_rtc.c Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1. 2015-09-01 13:47:06 -04:00
sam_rtc.h RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
sam_rtt.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_rtt.h Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
sam_serial.c SAM4CM: Add support for optical mode for UART1. From Max Neklyudov. 2015-05-23 06:48:36 -06:00
sam_spi.c wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
sam_spi.h Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
sam_start.c In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
sam_tc.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_tc.h Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
sam_timerisr.c Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1. 2015-09-01 13:47:06 -04:00
sam_twi.c Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
sam_twi.h SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov. 2015-06-22 09:32:15 -06:00
sam_udp.c Remove some nonfunctional logic that also generates warnings 2015-09-08 13:02:33 -06:00
sam_udp.h Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
sam_userspace.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_userspace.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_vectors.S Fix error in almost all ARMv7-M interrupt stack handling 2015-09-14 07:07:13 -06:00
sam_wdt.c Eliminate warnings 2015-09-08 10:20:41 -06:00
sam_wdt.h Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00