eaaba5e0a1
Wire the shared Ameba PWM driver (arch/arm/src/common/ameba/ameba_pwm.c) to RTL8721F (amebagreen2). The chip spreads PWM across four four-channel timers (TIM4..TIM7); this port drives TIM4 as the single time base with four compare channels, matching the shared driver's model. A new ameba_pwm_chip.h supplies the RTL8721F specifics taken from the SDK fwlib headers: TIM4 at the non-secure base 0x41000000, 40 MHz input clock, IRQ 11 (TIMER4_IRQ), crossbar pad-mux codes 111..114 (PINMUX_FUNCTION_TIM4_PWM0..3) and the distinct function/clock enable bits (APBPeriph_PWM0 / APBPeriph_PWM0_CLOCK). The board registers one timer at /dev/pwm0 with channel 1 on PB18 and channel 2 on PB19 for the pwm example; edit the table to match a board's wiring. The common driver is not touched. Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn> Assisted-by: Claude <noreply@anthropic.com> |
||
|---|---|---|
| .github | ||
| arch | ||
| audio | ||
| binfmt | ||
| boards | ||
| cmake | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| dummy | ||
| fs | ||
| graphics | ||
| include | ||
| libs | ||
| mm | ||
| net | ||
| openamp | ||
| pass1 | ||
| sched | ||
| syscall | ||
| tools | ||
| video | ||
| wireless | ||
| .asf.yaml | ||
| .codespell-ignore-lines | ||
| .codespellrc | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmessage | ||
| .pre-commit-config.yaml | ||
| .yamllint | ||
| AUTHORS | ||
| CMakeLists.txt | ||
| CONTRIBUTING.md | ||
| INVIOLABLES.md | ||
| Kconfig | ||
| LICENSE | ||
| Makefile | ||
| NOTICE | ||
| README.md | ||
| ReleaseNotes | ||
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller environments, the primary governing standards in NuttX are POSIX and ANSI standards. Additional standard APIs from Unix and other common RTOSs (such as VxWorks) are adopted for functionality not available under these standards, or for functionality that is not appropriate for deeply-embedded environments (such as fork()).
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
Getting Started
First time on NuttX? Read the Getting Started guide! If you don't have a board available, NuttX has its own simulator that you can run on terminal.
Documentation
You can find the current NuttX documentation on the Documentation Page.
Alternatively, you can build the documentation yourself by following the Documentation Build Instructions.
The old NuttX documentation is still available in the Apache wiki.
Supported Boards
NuttX supports a wide variety of platforms. See the full list on the Supported Platforms page.
Contributing
If you wish to contribute to the NuttX project, read the Contributing guidelines for information on Git usage, coding standard, workflow and the NuttX principles.
License
The code in this repository is under either the Apache 2 license, or a license compatible with the Apache 2 license. See the License Page for more information.