| .. |
|
a1x
|
arch/arm/src/a1x: Fix a compile error introduce in recent commit.
|
2017-12-18 09:00:41 -06:00 |
|
arm
|
arch/arm/src/arm/up_cache.S: Fix cp15_invalidate_dcache. In cases where more than one dcache line was to be invalidated, a missing branch label would result in a false branch target into cp15_flush_idcache. Also the .size macro was fixed for both cp15_invalidate_dcache.
|
2017-12-22 06:54:37 -06:00 |
|
armv6-m
|
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
|
2017-05-13 13:28:15 -06:00 |
|
armv7-a
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
armv7-m
|
ARM syscall logic: Clear bit 0 in PC settings. Bit 0 is the thumb mode indication and should not be set in the PC.
|
2017-08-30 13:56:03 -06:00 |
|
armv7-r
|
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
|
2017-05-13 13:28:15 -06:00 |
|
bcm2708
|
BCM2708: The PiZero configuration now compiles and links cleanly. Still a few thngs missing internally.
|
2017-10-18 14:07:52 -06:00 |
|
c5471
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
common
|
Merged in masayuki2009/nuttx.nuttx/lc823450_smp_improvement (pull request #554)
|
2017-12-08 12:31:34 +00:00 |
|
dm320
|
Convert some serial drivers to use use irq_attach.
|
2017-02-27 08:55:21 -06:00 |
|
efm32
|
fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation.
|
2017-11-13 09:08:39 -06:00 |
|
imx1
|
Squashed commit of the following:
|
2017-10-04 15:22:27 -06:00 |
|
imx6
|
Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional.
|
2017-10-10 14:24:13 -06:00 |
|
kinetis
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
kl
|
arch/arm/src/a1x, kl, lpc11xx, lpc31xx, and nuc1xx: Fix some compile warnings that I introduced with a possibly overzealous recent change.
|
2017-12-17 18:12:19 -06:00 |
|
lc823450
|
arch/arm/src/lc823450: Change irqwarn() to ASSERT() in up_ack_irq()
|
2018-01-18 14:02:24 +09:00 |
|
lpc11xx
|
arch/arm/src/a1x, kl, lpc11xx, lpc31xx, and nuc1xx: Fix some compile warnings that I introduced with a possibly overzealous recent change.
|
2017-12-17 18:12:19 -06:00 |
|
lpc17xx
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
lpc31xx
|
arch/arm/src/a1x, kl, lpc11xx, lpc31xx, and nuc1xx: Fix some compile warnings that I introduced with a possibly overzealous recent change.
|
2017-12-17 18:12:19 -06:00 |
|
lpc43xx
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
lpc54xx
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
lpc214x
|
Convert remaining serial drivers to use use irq_attach.
|
2017-02-27 10:27:14 -06:00 |
|
lpc2378
|
Squashed commit of the following:
|
2017-10-04 15:22:27 -06:00 |
|
moxart
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
nuc1xx
|
arch/arm/src/a1x, kl, lpc11xx, lpc31xx, and nuc1xx: Fix some compile warnings that I introduced with a possibly overzealous recent change.
|
2017-12-17 18:12:19 -06:00 |
|
sam34
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
sama5
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
samdl
|
Merged in extent3d/nuttx (pull request #583)
|
2018-01-25 20:15:58 +00:00 |
|
samv7
|
arch/arm/src/samv7/sam_lowputc.c: Fix undefined variable when using USART1 for other purposes than UART (e.g. SPI).
|
2018-01-26 07:52:45 -06:00 |
|
stm32
|
arch/arm/src/stm32/stm32f40xxx_i2c.c: Correct some recent changes to STM32F4 I2C that broke poll mode of operation.
|
2018-01-24 06:58:47 -06:00 |
|
stm32f0
|
Cosmetic fixes to comments, README, and other trivial corrections.
|
2017-12-25 10:45:47 -06:00 |
|
stm32f7
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
stm32l4
|
Cosmetic fixes to comments, README, and other trivial corrections.
|
2017-12-25 10:45:47 -06:00 |
|
str71x
|
Convert remaining serial drivers to use use irq_attach.
|
2017-02-27 10:27:14 -06:00 |
|
tiva
|
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
|
2018-01-22 08:17:45 -06:00 |
|
tms570
|
Squashed commit of the following:
|
2017-10-09 13:11:17 -06:00 |
|
xmc4
|
Merged in david_alessio/nuttx/refactor-pll-setup (pull request #581)
|
2018-01-22 13:20:35 +00:00 |
|
.gitignore
|
|
|
|
Makefile
|
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
|
2017-05-13 16:01:38 -06:00 |
