Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-01 20:28:58 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
nuttx/boards/arm/stm32/nucleo-f429zi/include/board.h
Huang Qi e09048cc88 style: Fix "is is" typo across the codebase. 
Correct duplicate "is is" word found in 181 files throughout the
codebase.
In most cases "is is" was changed to "is", but in contexts like
"MCU is is sleep mode" it was corrected to "MCU in sleep mode".

Also fixes a "the the" typo in net/inet/inet_sockif.c.

This is a pure style/documentation fix that improves code readability.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2026-03-24 09:39:26 +08:00

376 lines
13 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/nucleo-f429zi/include/board.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32F4_NUCLEO_F429ZI_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32F4_NUCLEO_F429ZI_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/* Do not include STM32 F4 header files here */
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The STM32F4 Discovery board features a single 8MHz crystal. Space is
* provided for a 32kHz RTC backup crystal, but it is not stuffed.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 180000000 Determined by PLL config
* HCLK(Hz) : 180000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
* PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for highspeed SYSCLK
* Flash Latency(WS) : 5
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - On-board crystal frequency is 8MHz
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 8000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (8,000,000 / 8) * 336
* = 336,000,000
* SYSCLK = PLL_VCO / PLLP
* = 336,000,000 / 2 = 168,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 48,000,000
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
#define STM32_SYSCLK_FREQUENCY 168000000ul
/* AHB clock (HCLK) is SYSCLK (168MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY/2)
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
/* DMA Channel/Stream Selections ********************************************/
/* Stream selections are arbitrary for now but might become important in the
* future if we set aside more DMA channels/streams.
*
* SDMMC DMA is on DMA2
*
* SDMMC1 DMA
* DMAMAP_SDMMC1_1 = Channel 4, Stream 3
* DMAMAP_SDMMC1_2 = Channel 4, Stream 6
*
* SDMMC2 DMA
* DMAMAP_SDMMC2_1 = Channel 11, Stream 0
* DMAMAP_SDMMC3_2 = Channel 11, Stream 5
*/
#define DMAMAP_SDMMC1 DMAMAP_SDMMC1_1
#define DMAMAP_SDMMC2 DMAMAP_SDMMC2_1
/* FLASH wait states
*
* --------- ---------- -----------
* VDD MAX SYSCLK WAIT STATES
* --------- ---------- -----------
* 1.7-2.1 V 180 MHz 8
* 2.1-2.4 V 216 MHz 9
* 2.4-2.7 V 216 MHz 8
* 2.7-3.6 V 216 MHz 7
* --------- ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 7
/* LED definitions **********************************************************/
/* The Nucleo-144 board has numerous LEDs but only three, LD1 a Green LED,
* LD2 a Blue LED and LD3 a Red LED, that can be controlled by software.
* The following definitions assume the default Solder Bridges are installed.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs
* in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_GREEN BOARD_LED1
#define BOARD_LED_BLUE BOARD_LED2
#define BOARD_LED_RED BOARD_LED3
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode
* OS-related events as follows:
*
*
* SYMBOL Meaning LED state
* Red Green Blue
* ---------------------- -------------------------- ------ ------ ---
*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is in sleep mode ON OFF OFF */
/* Thus if the Green LED is statically on, NuttX has successfully booted and
* is, apparently, running normally. If the Red LED is flashing at
* approximately 2Hz, then a fatal error has been detected and the system
* has halted.
*/
/* Button definitions *******************************************************/
/* The STM32F4 Discovery supports one button: Pushbutton B1, labeled "User",
* is connected to GPIO PI11.
* A high value will be sensed when the button is depressed.
*/
#define BUTTON_USER 0
#define NUM_BUTTONS 1
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Alternate function pin selections ****************************************/
/* TIM */
#define GPIO_TIM1_CH1OUT (GPIO_TIM1_CH1OUT_1|GPIO_SPEED_50MHz)
#define GPIO_TIM2_CH1OUT (GPIO_TIM2_CH1OUT_1|GPIO_SPEED_50MHz)
#define GPIO_TIM3_CH1OUT (GPIO_TIM3_CH1OUT_1|GPIO_SPEED_50MHz)
#define GPIO_TIM4_CH1OUT (GPIO_TIM4_CH1OUT_1|GPIO_SPEED_50MHz)
#if defined(CONFIG_NUCLEO_F429ZI_CONSOLE_ARDUINO)
/* USART6:
*
* These configurations assume that you are using a standard Arduio RS-232
* shield with the serial interface with RX on pin D0 and TX on pin D1:
*
* -------- ---------------
* STM32F4
* ARDUIONO FUNCTION GPIO
* -- ----- --------- -----
* DO RX USART6_RX PG9
* D1 TX USART6_TX PG14
* -- ----- --------- -----
*/
# define GPIO_USART6_RX (GPIO_USART6_RX_2|GPIO_SPEED_100MHz)
# define GPIO_USART6_TX (GPIO_USART6_TX_2|GPIO_SPEED_100MHz)
#endif
/* USART3:
* Use USART3 and the USB virtual COM port
*/
#if defined(CONFIG_NUCLEO_F429ZI_CONSOLE_VIRTUAL)
# define GPIO_USART3_RX (GPIO_USART3_RX_3|GPIO_SPEED_100MHz)
# define GPIO_USART3_TX (GPIO_USART3_TX_3|GPIO_SPEED_100MHz)
#endif
/* DMA channels *************************************************************/
/* ADC */
#define ADC1_DMA_CHAN DMAMAP_ADC1_1
#define ADC2_DMA_CHAN DMAMAP_ADC2_1
#define ADC3_DMA_CHAN DMAMAP_ADC3_1
/* SPI
*
*
* PA6 SPI1_MISO CN12-13
* PA7 SPI1_MOSI CN12-15
* PA5 SPI1_SCK CN12-11
*
* PB14 SPI2_MISO CN12-28
* PB15 SPI2_MOSI CN12-26
* PB13 SPI2_SCK CN12-30
*
* PB4 SPI3_MISO CN12-27
* PB5 SPI3_MOSI CN12-29
* PB3 SPI3_SCK CN12-31
*/
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz)
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_3|GPIO_SPEED_50MHz)
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_2|GPIO_SPEED_50MHz)
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_1|GPIO_SPEED_50MHz)
/* I2C
*
*
* PB8 I2C1_SCL CN12-3
* PB9 I2C1_SDA CN12-5
* PB10 I2C2_SCL CN11-51
* PB11 I2C2_SDA CN12-18
*
* PA8 I2C3_SCL CN12-23
* PC9 I2C3_SDA CN12-1
*
*/
#define GPIO_I2C1_SCL (GPIO_I2C1_SCL_2|GPIO_SPEED_50MHz)
#define GPIO_I2C1_SDA (GPIO_I2C1_SDA_2|GPIO_SPEED_50MHz)
#define GPIO_I2C2_SCL (GPIO_I2C2_SCL_1|GPIO_SPEED_50MHz)
#define GPIO_I2C2_SDA (GPIO_I2C2_SDA_1|GPIO_SPEED_50MHz)
#define GPIO_I2C3_SCL (GPIO_I2C3_SCL_1|GPIO_SPEED_50MHz)
#define GPIO_I2C3_SDA (GPIO_I2C3_SDA_1|GPIO_SPEED_50MHz)
/* The STM32 F4 connects to a SMSC LAN8742A PHY using these pins:
*
* STM32 F4 BOARD LAN8742A
* GPIO SIGNAL PIN NAME
* -------- ------------ -------------
* PG11 RMII_TX_EN TXEN
* PG13 RMII_TXD0 TXD0
* PB13 RMII_TXD1 TXD1
* PC4 RMII_RXD0 RXD0/MODE0
* PC5 RMII_RXD1 RXD1/MODE1
* PG2 RMII_RXER RXER/PHYAD0 -- Not used
* PA7 RMII_CRS_DV CRS_DV/MODE2
* PC1 RMII_MDC MDC
* PA2 RMII_MDIO MDIO
* N/A NRST nRST
* PA1 RMII_REF_CLK nINT/REFCLK0
* N/A OSC_25M XTAL1/CLKIN
*
* The PHY address is either 0 or 1, depending on the state of PG2 on reset.
* PG2 is not controlled but appears to result in a PHY address of 0.
*/
#define GPIO_ETH_RMII_TX_EN (GPIO_ETH_RMII_TX_EN_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_TXD0 (GPIO_ETH_RMII_TXD0_2|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_TXD1 (GPIO_ETH_RMII_TXD1_1|GPIO_SPEED_100MHz)
#define GPIO_ETH_MDC (GPIO_ETH_MDC_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_MDIO (GPIO_ETH_MDIO_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_CRS_DV (GPIO_ETH_RMII_CRS_DV_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_REF_CLK (GPIO_ETH_RMII_REF_CLK_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_RXD0 (GPIO_ETH_RMII_RXD0_0|GPIO_SPEED_100MHz)
#define GPIO_ETH_RMII_RXD1 (GPIO_ETH_RMII_RXD1_0|GPIO_SPEED_100MHz)
#endif /* __BOARDS_ARM_STM32F4_NUCLEO_F429ZI_INCLUDE_BOARD_H */
Reference in a new issue View git blame Copy permalink