Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-01 20:28:58 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
nuttx/boards/arm/stm32/nucleo-f303ze/include/board.h
Huang Qi e09048cc88 style: Fix "is is" typo across the codebase. 
Correct duplicate "is is" word found in 181 files throughout the
codebase.
In most cases "is is" was changed to "is", but in contexts like
"MCU is is sleep mode" it was corrected to "MCU in sleep mode".

Also fixes a "the the" typo in net/inet/inet_sockif.c.

This is a pure style/documentation fix that improves code readability.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2026-03-24 09:39:26 +08:00

207 lines
7.6 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/nucleo-f303ze/include/board.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_NUCLEO_F303ZE_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32_NUCLEO_F303ZE_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* HSI - Internal 8 MHz RC Oscillator
* LSI - 32 KHz RC
* HSE - 8 MHz from MCO output of ST-LINK
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 8000000ul /* X1 on board */
#define STM32_HSEBYP_ENABLE
#define STM32_HSI_FREQUENCY 8000000ul
#define STM32_LSI_FREQUENCY 40000 /* Between 30kHz and 60kHz */
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768 /* X2 on board */
/* PLL source is HSE/1, PLL multiplier is 9:
* PLL frequency is 8MHz (XTAL) x 9 = 72MHz
*/
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
#define STM32_CFGR_PLLXTPRE 0
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
/* Use the PLL and set the SYSCLK source to be the PLL */
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
/* AHB clock (HCLK) is SYSCLK (72MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
/* APB2 clock (PCLK2) is HCLK (72MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 1 and 8, 15-17 */
/* APB2 timers 1 and 8, 15-17 will receive PCLK2. */
/* Timers driven from APB2 will be PCLK2 */
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM15_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM16_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM17_CLKIN (STM32_PCLK2_FREQUENCY)
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB1 timers 2-7 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* USB divider -- Divide PLL clock by 1.5 */
#define STM32_CFGR_USBPRE 0
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
/* LED definitions **********************************************************/
/* The Nucleo-144 board has numerous LEDs but only three, LD1 a Green LED,
* LD2 a Blue LED and LD3 a Red LED, that can be controlled by software.
* The following definitions assume the default Solder Bridges are installed.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs
* in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_GREEN BOARD_LED1
#define BOARD_LED_BLUE BOARD_LED2
#define BOARD_LED_RED BOARD_LED3
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode
* OS-related events as follows:
*
*
* SYMBOL Meaning LED state
* Red Green Blue
* ---------------------- -------------------------- ------ ------ ----
*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is in sleep mode ON OFF OFF */
/* Button definitions *******************************************************/
/* The NUCLEO board supports one button: Pushbutton B1, labeled "User", is
* connected to GPIO PC13. A high value will be sensed when the button is
* depressed.
*/
#define BUTTON_USER 0
#define NUM_BUTTONS 1
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Alternate function pin selections ****************************************/
/* USART3 (Nucleo Virtual Console) */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
/* I2C1 Use Nucleo I2C1 pins */
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_3 /* PB8 - D15 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_3 /* PB9 - D14 */
/* I2C2 Use Nucleo I2C2 pins */
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2 /* PF1 - D69 */
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2 /* PF0 - D68 */
#define GPIO_I2C2_SMBA GPIO_I2C2_SMBA_2 /* PF2 - D70 */
/* DMA **********************************************************************/
#define ADC1_DMA_CHAN DMACHAN_ADC1
#define ADC3_DMA_CHAN DMACHAN_ADC3
#endif /* __BOARDS_ARM_STM32_NUCLEO_F303ZE_INCLUDE_BOARD_H */
Reference in a new issue View git blame Copy permalink