Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-01 20:28:58 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
nuttx/boards/arm/stm32/emw3162/include/board.h
Huang Qi e09048cc88 style: Fix "is is" typo across the codebase. 
Correct duplicate "is is" word found in 181 files throughout the
codebase.
In most cases "is is" was changed to "is", but in contexts like
"MCU is is sleep mode" it was corrected to "MCU in sleep mode".

Also fixes a "the the" typo in net/inet/inet_sockif.c.

This is a pure style/documentation fix that improves code readability.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2026-03-24 09:39:26 +08:00

205 lines
7.4 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/emw3162/include/board.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdbool.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The EMW3162 board features a single 26MHz crystal.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 120000000 Determined by PLL
* configuration
* HCLK(Hz) : 120000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 26000000 (STM32_BOARD_XTAL)
* PLLM : 26 (STM32_PLLCFG_PLLM)
* PLLN : 240 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 5 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed
* SYSCLK
* Flash Latency(WS) : 3
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG HS : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - On-board crystal frequency is 26MHz
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 26000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (26,000,000 / 26) * 240
* = 240,000,000
* SYSCLK = PLL_VCO / PLLP
* = 240,000,000 / 2 = 120,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 48,000,000
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(26)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(240)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
#define STM32_SYSCLK_FREQUENCY 120000000ul
/* AHB clock (HCLK) is SYSCLK (120MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* LED definitions **********************************************************/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
* OS-related events as follows:
*
* ------------------- ---------------------------- ------
* SYMBOL Meaning LED
* ------------------- ---------------------------- ------
*/
#define LED_STARTED 0 /* NuttX has been started OFF */
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
#define LED_STACKCREATED 1 /* Idle stack created ON */
#define LED_INIRQ 2 /* In an interrupt N/C */
#define LED_SIGNAL 2 /* In a signal handler N/C */
#define LED_ASSERTION 2 /* An assertion failed N/C */
#define LED_PANIC 3 /* The system has crashed FLASH */
#undef LED_IDLE /* MCU is in sleep mode Not used */
/* Thus if LED is statically on, NuttX has successfully booted and is,
* apparently, running normally. If LED is flashing at approximately
* 2Hz, then a fatal error has been detected and the system has halted.
*/
/* Alternate function pin selections ****************************************/
/* UART1 */
#ifdef CONFIG_STM32_USART1
# define GPIO_USART1_RX GPIO_USART1_RX_1
# define GPIO_USART1_TX GPIO_USART1_TX_1
#endif
/* SDIO definitions *********************************************************/
/* Note that slower clocking is required when DMA is disabled in order
* to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode.
*
* These values have not been tuned!!!
*
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA Channel/Stream Selections ********************************************/
/* Stream selections are arbitrary for now but might become important in the
* future if we set aside more DMA channels/streams.
*
* SDIO DMA
* DMAMAP_SDIO_1 = Channel 4, Stream 3
* DMAMAP_SDIO_2 = Channel 4, Stream 6
*/
#define DMAMAP_SDIO DMAMAP_SDIO_1
#endif /* __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H */
Reference in a new issue View git blame Copy permalink