dongjiuzhu1 1946bc4e44 drivers/serial: fix crash when buffer is full and only recvbuf is implemented ... When the receive buffer is full and the driver only implements recvbuf operation without receive operation, the code would crash due to calling a NULL function pointer. This patch fixes the issue by: 1. Check if recvbuf is available before calling it 2. When buffer is full, use a temporary buffer to drain hardware FIFO to prevent data accumulation in hardware 3. Add proper NULL check for receive operation to avoid crash 4. Initialize pbuf to NULL to prevent uninitialized variable usage This ensures the serial driver works correctly even when only recvbuf is implemented and the receive buffer is full. Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>		2026-01-28 22:19:21 +08:00
..
1wire
aie
analog	drivers/analog/mcp47x6: fix configuration command	2026-01-22 00:12:37 +08:00
audio
bch
can	ctucanfd: increase rwcnt bitfield width and fix structure alignment	2026-01-17 12:43:48 +01:00
clk
contactless
coresight
crypto
devicetree
dma
dummy
eeprom
efuse
i2c
i2s
i3c
input	drivers/input/ff: use small lock to replace enter_critical_section	2026-01-08 11:17:17 +08:00
ioexpander	ioe_dummy: fix pinval always zero issue	2026-01-05 15:10:41 -03:00
ipcc
lcd
leds	drivers/leds: remove bo_closing as lu_lock can prevent race condition occurs	2026-01-08 11:17:17 +08:00
loop
math	drivers/math: use small lock to replace enter_critical_section	2026-01-08 11:17:17 +08:00
misc	drivers/misc/optee: add missing addrenv header include	2026-01-16 09:04:12 -03:00
mmcsd	drivers/mmcsd: fix typo, it should be "Byte" by spec	2026-01-16 01:38:29 +08:00
modem
motor	drivers/motor: use small lock to replace enter_critical_section	2026-01-08 11:17:17 +08:00
mtd	mtd/mtd_config: add mtdconfig_register_by_path/mtdconfig_unregister_by_path api	2026-01-26 10:52:51 +08:00
net	net: access the serial port in raw format to avoid character escaping	2026-01-22 23:17:08 +08:00
note	note: add NOTE_DUMP_BINARY support for binary log dumping	2026-01-27 21:56:03 +08:00
pci	drivers/pci: fix BAR size probing mask	2026-01-16 20:36:45 +08:00
pinctrl
pipes	drivers/pipe: fix POLLHUP handling in poll()	2026-01-22 22:09:01 +08:00
power
rc
regmap
reset
rf
rmt
rpmsg	drivers/rpmsg_port_uart: Fix some compile warnings	2026-01-28 19:23:41 +08:00
rptun	drivers/rptun: it's not error when no carveout for virtio device	2026-01-19 14:18:27 +08:00
segger
sensors	drivers/sensors: sensor bug fix.	2026-01-28 16:50:19 +08:00
serial	drivers/serial: fix crash when buffer is full and only recvbuf is implemented	2026-01-28 22:19:21 +08:00
spi
syslog	driver/ramlog: Implement the rate limiting function for ramlog driver.	2026-01-27 03:17:05 +08:00
thermal
timers	drivers/pwm : remove critical section and mutex.	2026-01-27 17:59:07 +08:00
usbdev	Author: shichunma <masc2008@gmail.com> Date: Thu Jan 15 07:24:08 2026 +0800	2026-01-25 23:59:49 +08:00
usbhost	drivers/usbhost_hidkbd: Fix small typo in usbhost_hidkbd.c	2026-01-18 11:57:58 -05:00
usbmisc
usbmonitor
usrsock	usrsock_rpmsg_server.c: replace net_lock with conn_lock	2026-01-07 09:17:49 -03:00
vhost	drivers/vhost-rng: fix the vhost-rng compile error	2026-01-19 14:18:27 +08:00
video	boards/sim: Fix watchdog callback	2026-01-23 09:46:02 +08:00
virtio	virtio and vhost-rpmsg: add virtio and vhost rpmsg device support	2026-01-19 14:18:27 +08:00
wireless	boards/sim: Fix watchdog callback	2026-01-23 09:46:02 +08:00
.gitignore
CMakeLists.txt
drivers_initialize.c	drivers/net/rpmsgdrv.c: add bidirectional data netdev support, server side	2026-01-16 09:42:01 +08:00
Kconfig
Makefile