| .. |
|
analog
|
|
|
|
audio
|
|
|
|
binfmt
|
Oops.. part of the last change will still in the editor
|
2014-11-12 18:33:07 -06:00 |
|
crypto
|
|
|
|
eeprom
|
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
|
2014-12-05 09:13:34 -06:00 |
|
fs
|
Fixes warning about block_operations not being defined. From David Sidrane.
|
2014-12-30 06:19:30 -06:00 |
|
input
|
Update the ADXL345 interface following the current interface scheme
|
2014-12-16 11:45:28 -06:00 |
|
lcd
|
ili9341: update interface control definitions
|
2014-12-19 13:52:40 -06:00 |
|
mm
|
MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes
|
2014-11-02 12:11:20 -06:00 |
|
mtd
|
Added forward reference to eliminate warnings. From David Sidrane.
|
2014-12-30 06:20:40 -06:00 |
|
net
|
Move IP header flags from tcp.h to ip.h and rename IP_FLAGS vs TCPFLAGS. The problem fixed here is that there IP flags were not available when TCP was disabled. The IP flags are used in ICMP and IGFMP
|
2014-11-17 17:16:46 -06:00 |
|
nx
|
Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville
|
2014-12-10 17:11:23 -06:00 |
|
power
|
|
|
|
sensors
|
Update ChangeLog
|
2015-01-06 10:52:05 -06:00 |
|
sercomm
|
|
|
|
serial
|
STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane
|
2014-12-27 18:58:18 -06:00 |
|
spi
|
Add ADXL345 accelerometer driver. From Alan Carvalho de Assis
|
2014-12-16 08:16:53 -06:00 |
|
syslog
|
ARMv7: Add support to use ITM for SYSLOG debug output
|
2014-10-22 09:03:00 -06:00 |
|
usb
|
|
|
|
video
|
STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review
|
2014-12-19 14:52:17 -06:00 |
|
wireless
|
Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis
|
2014-12-18 13:52:01 -06:00 |
|
.gitignore
|
|
|
|
addrenv.h
|
|
|
|
arch.h
|
Fixes to tickless operation code. From Brandon Warhurst
|
2014-10-23 06:41:31 -06:00 |
|
ascii.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
can.h
|
|
|
|
clock.h
|
|
|
|
compiler.h
|
Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier.
|
2014-11-12 07:32:36 -06:00 |
|
configdata.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
float.h
|
|
|
|
i2c.h
|
|
|
|
init.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
irq.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
kmalloc.h
|
|
|
|
kthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
lib.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
math.h
|
|
|
|
mmcsd.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
mqueue.h
|
Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes
|
2014-09-30 08:03:39 -06:00 |
|
page.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pgalloc.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
poff.h
|
|
|
|
progmem.h
|
|
|
|
pthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pwm.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
regex.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
rtc.h
|
|
|
|
rwbuffer.h
|
|
|
|
sched.h
|
strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.
|
2014-12-17 12:24:02 -06:00 |
|
scsi.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
sdio.h
|
STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y
|
2015-01-08 18:12:06 -06:00 |
|
semaphore.h
|
Complete re-implementation of mq_close
|
2014-09-29 15:33:34 -06:00 |
|
spawn.h
|
|
|
|
stdarg.h
|
|
|
|
streams.h
|
Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog
|
2014-10-08 19:08:26 -06:00 |
|
time.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
timer.h
|
|
|
|
tree.h
|
|
|
|
userspace.h
|
Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK
|
2014-10-11 15:59:40 -06:00 |
|
vt100.h
|
Add ANSI/VT100 color codes
|
2014-11-10 15:10:57 -06:00 |
|
watchdog.h
|
|
|
|
wdog.h
|
|
|
|
wqueue.h
|
Fix warning caused by missing comment closing */. From David Sidrane.
|
2014-12-30 06:22:18 -06:00 |
