drivers/analog/lmp92001.c: Add support for the TI LMP92001 device.
2018-12-21 09:46:33 -06:00
Fixes warnings from header files:
2018-11-09 09:10:28 -06:00
binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.
2019-01-26 11:34:40 -06:00
This change:
2018-12-19 08:42:48 -06:00
Merged in raiden00/nuttx_pe (pull request #779 )
2018-12-09 16:31:57 +00:00
drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02
2018-12-30 11:20:03 -06:00
Fix condition logic: The setup seems to support a network without sockets. That is not the case.
2019-02-11 15:47:25 -06:00
include/nuttx/i2c/i2c_master.h: Fix a small typo.
2018-12-07 18:53:57 -06:00
drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD
2019-01-27 08:53:12 -06:00
sched/signal and related changes to other OS subsystems.
2019-01-27 09:28:59 -06:00
drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD
2019-01-27 08:53:12 -06:00
binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.
2019-01-26 11:34:40 -06:00
mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition.
2019-01-26 09:43:54 -06:00
Extends the MTD configdata device with the following features / additions:
2018-12-20 14:14:40 -06:00
Fix condition logic: The setup seems to support a network without sockets. That is not the case.
2019-02-11 15:47:25 -06:00
include/nuttx/nx/nxmu.h: This header file coul be lethal; it declared an #error if CONFIG_DISABLE_MQUEUE=y.
2019-02-04 18:45:09 -06:00
drivers/power/pm_activity.c: Add pm_staycount API for get stay numbers. This function is currently not used and a waste of FLASH space.
2019-01-27 11:19:26 -06:00
drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD
2019-01-27 08:53:12 -06:00
include/nuttx/serial/uart_16550.h: Fix warning: 'struct file' declared inside parameter list.
2019-01-27 11:22:40 -06:00
Merged in raiden00/nuttx_lora (pull request #821 )
2019-01-20 13:03:11 +00:00
Squashed commit of the following:
2019-02-04 16:20:35 -06:00
drivers/timers/timer.c: Support the signal notification through SIGEV_THREAD
2019-01-28 06:32:27 -06:00
Updates from coding standard review of PRs 753 and 754
2018-11-09 07:44:22 -06:00
drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD
2019-01-27 08:53:12 -06:00
Critical Section Monitor (sched/ and fs/procfs: Remove SCHED_IRQMONITOR_GETTIME to simplify the clock source selection: (1) Use up_critmon_gettime if SCHED_IRQMONITOR, (2) Call clock_systimespec if SCHED_TICKLESS, (3) Don't collect timing info for all other cases and move up_critmon_* to arch.h avoid the duplicated declaration.
2019-01-27 10:13:28 -06:00
graphics/nxmu/nxmu_start.c: Fix a naming collision introduced with the last commit. Ye olde nx_start that started the NX graphics is now nxmu_start().
2019-02-04 16:51:48 -06:00
ched/clock/: Remove g_monotonic_basetime and g_clock_monotonic_time since we don't need ensure monotonic time start from zero as state here: http://pubs.opengroup.org/onlinepubs/009696899/functions/clock_getres.html
2018-11-12 06:50:37 -06:00
include/nuttx/compiler.h: Correct support of C-version-specific features. Cannot depend on GCC version because -std=c89 may be used on comomand line. Need instead to use __STDC_VERSION__ to determine if a feature is supported. Also add conditional support inline, depending on C99.
2019-01-09 15:39:54 -06:00
include/nuttx/elf.h: I forgot to add this header file that was introduced in a preceding commiti 095e28d45e.
2019-01-26 11:56:49 -06:00
binfmt/ and libs/libc: Make exepath_*() more common:
2018-11-08 07:27:14 -06:00
Squashed commit of the following:
2019-02-04 16:20:35 -06:00
include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave macro typo error and remove the duplicated inclusion of arch/irq.h
2019-01-27 11:21:03 -06:00
include/nuttx/list.h: Fix some typos.
2019-01-29 07:37:22 -06:00
sched/signal and related changes to other OS subsystems.
2019-01-27 09:28:59 -06:00
Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE
2018-08-27 07:06:57 -06:00
Merged in ebsong/nuttx (pull request #722 )
2018-09-21 03:18:38 +00:00
Fix condition logic: The setup seems to support a network without sockets. That is not the case.
2019-02-11 15:47:25 -06:00
This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().
2018-11-20 14:03:42 -06:00
include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.
2018-09-26 06:58:08 -06:00
sched/signal and related changes to other OS subsystems.
2019-01-27 09:28:59 -06:00
Update TODO list.
2019-02-10 07:49:25 -06:00
arch/arm/src/samd2l2 serial: Fix SAMD2L2 serial driver it needs sam_usart_enable() to work
2019-01-26 12:51:51 -06:00
This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
2019-02-04 13:42:51 -06:00
sched/wqueue/kwork_notifier.c and several Kconfig files: Notifier should work with either lpwork or hpwork and other minor typo fix.
2019-01-27 11:02:56 -06:00
efe65749ce