Merged in juniskane/nuttx_stm32l4/stm32l4_adc_kconfig_pr (pull request #478 )
2017-09-06 22:05:44 +00:00
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver.
2017-08-24 11:11:06 -06:00
Documentation and comments updated to further enshrine exec() as an official NuttX interface.
2017-10-03 07:52:05 -06:00
MCP1515: Eliminate some warnings
2017-06-14 09:38:58 -06:00
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Add entropy pool and strong random number generator
2017-03-30 07:38:37 -06:00
Move SMPS driver to drivers/power (and header to include/nuttx/power). Rename debug to IOCTLs to more general power naming; create a separate file to coordinate power-related IOCTL commands.
2017-07-23 07:35:09 -06:00
Misc fixes for compilation with current SDCC compiler
2017-09-30 14:55:39 -06:00
include/nuttx/input: Remove bogus, obsolete keypad.h header file.
2017-07-04 15:58:39 -06:00
drivers/lcd: ssd1306: add support for board power control. ThingseeOne has regulator for controlling display power on/off. Patch adds support for board based power control to SSD1306 driver.
2017-08-22 08:40:27 -06:00
Add driver for APA102 LED controller. These LEDs are used on LED Strips and are controlled over SPI.
2017-09-18 16:48:55 -06:00
libm: Port gamma() and lgamma() from FreeBSD to NuttX.
2017-08-08 07:02:39 -06:00
PF_IEEE802154: Finishes up sendto() logic
2017-08-19 12:32:56 -06:00
MTD: Add driver for Macronix QuadSPI flash memory
2017-08-06 10:51:17 -06:00
Squashed commit of the following:
2017-09-30 10:41:21 -06:00
Fix some build problems after recent separation of internal OS from application interfaces. The build problem only occurs in the PROTECTED and KERNEL builds where separate libraries are built for the applications and for use within the OS. In these cases, the correct interfaces must be used. This commit fixes a few of these, so I can get through build testing, but there are many more that need fixin'.
2017-10-08 08:13:47 -06:00
Merged in raiden00/nuttx (pull request #503 )
2017-10-08 19:13:12 +00:00
The INA219 is a combined voltage and current sensor that can measure up to 26 volts and a current that depends on an external shunt resistor. Connection happens via i2c/smbus and the chip features a power supply rail that is independent from the measured voltage, so it can measure low voltages.
2017-10-10 17:03:56 -06:00
Squashed commit of the following:
2017-07-28 12:01:05 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Extend the RTC framework with an alarm read ioctl (RTC_RD_ALARM). Through it consumer could get configuration settings about previously scheduled hardware alarms (active status, hours, minutes, seconds).
2017-09-03 08:39:02 -06:00
drivers/usbdev: Add RNDIS-over-USB driver
2017-09-24 07:24:34 -06:00
Fix some typos in comments; Fix some bad spacing in fb.h
2017-09-18 09:03:26 -06:00
Merged in merlin17/nuttx/xbee (pull request #484 )
2017-09-15 14:37:55 +00:00
Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h
2017-05-13 16:53:55 -06:00
Squashed commit of the following:
2017-07-16 08:43:17 -06:00
task: Add new cancellation point interface, check_cancellation_point().
2017-10-09 09:43:04 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.
2017-10-02 07:09:31 -06:00
Add missing endif
2017-03-03 14:39:35 -06:00
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Module names are not needed in libc/modlib when the module library is used only for shared library support.
2017-01-29 12:23:24 -06:00
Squashed commit of the following:
2017-10-10 09:57:40 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Update ChangeLog in prep for 7.20 release.
2017-03-08 10:09:48 -06:00
sdio.h:Fix typos
2017-08-17 09:33:34 -10:00
libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.
2017-10-08 12:14:18 -06:00
libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.
2017-10-08 12:14:18 -06:00
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Update some wdog-related comments
2017-02-24 10:58:37 -06:00
work_queue() must cancel existing work prior to queuing new work, otherwise the work queue can become corrupted. Problem noted by Pascal Speck.
2017-08-28 07:46:48 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
d16d4d5568