Julian Oes 644a0cd525 drivers/serial: fix Rx interrupt enable for cdcacm ... This is addressing an issue where Rx interrupts were not restored for cdcacm after the buffer had been filled (in a burst). The Rx interrupts were only restored after the watchdog timeout of 200ms fired. This happened because CONFIG_SERIAL_RXDMA was set, however, for the cdcacm driver this does not actually matter as it is relying on uart_enablerxint to be called via the ops table. This patch makes sure that uart_enablerxint and uart_disablerxint are always called, independent of CONFIG_SERIAL_RXDMA, relying on the ops table to be correct for the case where it should be only a no-op.		2021-05-06 06:49:07 -07:00
..
Kconfig
Kconfig-16550
Kconfig-lpuart
Kconfig-sci
Kconfig-uart
Kconfig-usart
Make.defs
ptmx.c
pty.c
pty.h
serial.c	drivers/serial: fix Rx interrupt enable for cdcacm	2021-05-06 06:49:07 -07:00
serial_dma.c
serial_io.c
tcdrain.c
uart_16550.c
uart_rpmsg.c