Make DAC structure packed
2016-09-20 08:04:32 -06:00
drivers/audio: Add Audio Tone Generator for NuttX
2016-08-16 13:20:05 -06:00
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
Fix some comments in header files
2016-08-31 13:34:52 -06:00
Modifications to the crypto API needed for LPC43xx.
2016-05-23 08:05:02 -06:00
Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique.
2016-08-31 11:30:22 -06:00
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
include/nuttx/fs/nxffs.h: Needs forward reference to struct mtd_dev_s and needs to include stdbool.h
2016-10-09 14:07:19 -06:00
Changes from review of PR 114
2016-08-14 13:38:47 -06:00
Correct typo in comments
2016-10-11 14:13:28 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
correct logic hazard in latch and load nybble; was transitioning control lines at the same time as enable, causing spurious behaviour on less-tolerant displays
2016-05-29 11:09:00 -05:00
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls.
2016-08-21 07:47:53 -06:00
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.
2016-09-02 11:00:04 -06:00
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Correct some default font IDs
2016-12-10 07:46:54 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
Add a forward refeence to elininate a warning.
2016-12-03 16:35:37 -06:00
PTY: Add TERMIOS support.
2016-07-16 10:43:44 -06:00
contactless: spi device
2016-08-31 13:22:10 +02:00
Add a SYSLOG character device that can be used to re-direct output to the SYSLOG
2016-07-05 12:58:18 -06:00
Fix warnings
2016-11-18 15:26:08 +01:00
Fix C99 style comment
2016-08-26 08:28:54 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
Move contactless drivers to their own directory
2016-08-31 13:08:58 +02:00
Mostly updates and corrections to .gitignore files
2013-04-04 15:39:50 -06:00
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
2014-09-24 07:29:09 -06:00
Remove minnsh configurations and support logic: up_getc() and lowinstream.
2016-12-13 18:01:23 -06:00
ASCII: Improve some naming
2016-04-14 16:20:36 -06:00
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured.
2016-08-20 12:47:07 -06:00
Update compiler.h to support IAR compiler
2016-04-02 06:24:36 -06:00
enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized
2016-05-18 09:17:01 -06:00
Update TODO list
2016-11-19 13:23:15 -06:00
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
2016-02-16 19:33:22 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Remove the final vestiges of up_spiinitialize()
2016-01-27 09:27:56 -06:00
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
2015-12-13 08:10:01 -06:00
Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.
2016-04-11 11:14:18 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
Flesh basic cancellation point support
2016-12-09 09:44:23 -06:00
sched note: record ID enumeration now results on constant values; ID values do not change with configuration. This makes writing post-processing software much easier
2016-12-24 15:44:21 -06:00
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
include/nuttx/semaphore.h: Fix broken macros
2016-11-03 12:49:44 -06:00
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
2015-12-30 15:01:14 -06:00
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
2013-01-18 01:52:42 +00:00
SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section.
2016-12-27 08:49:07 -06:00
Remove minnsh configurations and support logic: up_getc() and lowinstream.
2016-12-13 18:01:23 -06:00
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
2015-12-13 08:10:01 -06:00
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
2015-04-08 06:56:43 -06:00
TLS: Simplify
2016-03-11 07:17:32 -06:00
Fix error in tree.h
2014-06-02 13:44:44 -06:00
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
2015-07-10 08:37:02 -06:00
Add ANSI/VT100 color codes
2014-11-10 15:10:57 -06:00
The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).
2016-01-05 07:58:04 -06:00
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
Move the TZ/Olson zoneinfo data set from apps/system/zoneinfo to libc/zoneinfo
2016-06-30 15:40:37 -06:00
cfb876263a