nuttx/Documentation/platforms/arm/rtl8721f
dechao_gong eaaba5e0a1 arch/arm/rtl8721f: add PWM master driver support
Wire the shared Ameba PWM driver (arch/arm/src/common/ameba/ameba_pwm.c)
to RTL8721F (amebagreen2).  The chip spreads PWM across four four-channel
timers (TIM4..TIM7); this port drives TIM4 as the single time base with
four compare channels, matching the shared driver's model.  A new
ameba_pwm_chip.h supplies the RTL8721F specifics taken from the SDK
fwlib headers: TIM4 at the non-secure base 0x41000000, 40 MHz input
clock, IRQ 11 (TIMER4_IRQ), crossbar pad-mux codes 111..114
(PINMUX_FUNCTION_TIM4_PWM0..3) and the distinct function/clock enable
bits (APBPeriph_PWM0 / APBPeriph_PWM0_CLOCK).

The board registers one timer at /dev/pwm0 with channel 1 on PB18 and
channel 2 on PB19 for the pwm example; edit the table to match a board's
wiring.  The common driver is not touched.

Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Assisted-by: Claude <noreply@anthropic.com>
2026-08-17 09:34:22 -03:00
..
boards/rtl8721f_evb arch/arm/rtl8721f: add PWM master driver support 2026-08-17 09:34:22 -03:00
index.rst