nuttx/include/nuttx
Alin Jerpelea 977893d5a7 Merged in alinjerpelea/nuttx (pull request #912)
configs: spresense: enable BMI160_I2C sensor

* drivers: sensors: add BMI160 driver

    Enable driver support for the Bosch BMI160 Inertial
    Measurement sensor

    This driver can be used with the BMI160 sensor connected over
    SPI or I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* configs: spresense: enable BMI160_I2C sensor

    Enable BMI160 sensor connected over I2C on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-20 13:32:36 +00:00
..
1wire
analog Squashed commit of the following: 2019-05-21 18:57:54 -06:00
audio Fixes warnings from header files: 2018-11-09 09:10:28 -06:00
binfmt binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes. 2019-01-26 11:34:40 -06:00
can Squashed commit of the following: 2019-05-21 18:57:54 -06:00
contactless Merged in raiden00/nuttx_l0f0 (pull request #848) 2019-04-05 15:49:45 +00:00
crypto This change: 2018-12-19 08:42:48 -06:00
drivers Merged in raiden00/nuttx_pe (pull request #779) 2018-12-09 16:31:57 +00:00
eeprom drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02 2018-12-30 11:20:03 -06:00
fs Squashed commit of the following: 2019-05-21 18:57:54 -06:00
i2c include/nuttx/i2c/i2c_master.h: Fix a small typo. 2018-12-07 18:53:57 -06:00
input Squashed commit of the following: 2019-05-21 18:57:54 -06:00
ioexpander sched/signal and related changes to other OS subsystems. 2019-01-27 09:28:59 -06:00
lcd Squashed commit of the following: 2019-04-29 14:52:05 -06:00
leds
lib Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again. 2019-06-03 19:04:24 -06:00
mm mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition. 2019-01-26 09:43:54 -06:00
modem
mtd Extends the MTD configdata device with the following features / additions: 2018-12-20 14:14:40 -06:00
net include/nuttx/net/bluetooth.h: Ignore content if CONFIG_NET_BLUETOOTH is not set. This is necessary because bt_hci.h content was previously comment out because it uses several compiler specific things include zero-dimensione arrays and uint64_t. Neither are supported by the C89 ZiLOG ZDS-II compiler. 2019-06-02 12:57:18 -06:00
nx graphics/nxterm: Add a new IOCTL that can be used to inform NxTerm that the size of a window has changed. 2019-05-16 13:12:24 -06:00
power drivers/power/pm_activity.c: Add pm_staycount API for get stay numbers. This function is currently not used and a waste of FLASH space. 2019-01-27 11:19:26 -06:00
sensors Merged in alinjerpelea/nuttx (pull request #912) 2019-06-20 13:32:36 +00:00
serial Squashed commit of the following: 2019-05-21 18:57:54 -06:00
spi configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
syslog arch/arm/src/common/up_initialize.c: up_initialize.c needs to know about ramlog_consoleinit() 2019-05-04 18:28:43 -06:00
timers configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
usb drivers/usbmisc/fusb303.c: Toggle enable bit off/on after detaching 2019-05-31 07:40:06 -06:00
video Abandon attempt to get common data structures for NX and the raw framebuffer cursor interface. This backs out several changes. 2019-04-07 18:00:40 -06:00
wireless Merged in masayuki2009/nuttx.nuttx/add_wireless_gs2200m (pull request #908) 2019-06-18 12:44:03 +00:00
.gitignore
addrenv.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
arch.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
ascii.h
board.h arch/ and config/ files: All board interfaces (those starting with board_) must be defined in board-specific logic. Otherwise, they cannot be customized of specialized usage by different boards. The board_reset() interface was defined in architecture-specific logic that only called up_systemreset(). That is useless! 2019-03-25 11:12:38 -06:00
cache.h arch/: Unify the cache interface for all architectures 2019-03-19 10:37:13 -06:00
cancelpt.h
clock.h Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
compiler.h include/nuttx/compiler.h: Assume inline support if __STDC_VERSION__ not defined. 2019-03-19 10:07:52 -06:00
elf.h Merged in antmerlino/nuttx/elf-cplusplus-guard (pull request #826) 2019-02-19 15:24:25 +00:00
environ.h
envpath.h binfmt/ and libs/libc: Make exepath_*() more common: 2018-11-08 07:27:14 -06:00
init.h Squashed commit of the following: 2019-02-04 16:20:35 -06:00
irq.h include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave macro typo error and remove the duplicated inclusion of arch/irq.h 2019-01-27 11:21:03 -06:00
kmalloc.h
kthread.h
list.h include/nuttx/list.h: Fix some typos. 2019-01-29 07:37:22 -06:00
mmcsd.h
module.h
mqueue.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
mutex.h
nuttx.h
page.h
pgalloc.h
poff.h
progmem.h
pthread.h
random.h
sched.h More ZNeo compile fixes: include/stdio.h: Another place where misuse of FAR makes a difference. include/nuttx/sched.h: Be consistent in use of WDOG_ID type. ZDS-II doesn't like auto-conversions of struct wdog_s * to WDOG_I (which is type struct wdog_s *). 2019-06-03 13:28:39 -06:00
sched_note.h
scsi.h
sdio.h This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache(). 2018-11-20 14:03:42 -06:00
semaphore.h
signal.h Fix several ZNeo compile issues. There are more. Pthreads: Fix a could of places where FAR was added when it is not appropriate. This matters to ZNeo which depends on definitions of NEAR and FAR points. 2019-06-03 13:06:58 -06:00
spawn.h
spinlock.h Squashed commit of the following: 2019-03-04 14:22:50 -06:00
streams.h Restore lib_sprintf(). It was removed because I thought was not used. But I was wrong; there is logic in drivers/syslog that depends on lib_sprintf(). 2019-02-16 12:29:00 -06:00
symtab.h arch/arm/src/samd2l2 serial: Fix SAMD2L2 serial driver it needs sam_usart_enable() to work 2019-01-26 12:51:51 -06:00
time.h
tls.h
tree.h
userspace.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
vt100.h
wdog.h
wqueue.h include/nuttx/wqueue.h: Allow definitions even if work queues are not enabled. This solves build failures when work queues are not enabled. 2019-06-03 13:13:17 -06:00
zoneinfo.h