mirror of
https://github.com/apache/nuttx.git
synced 2026-08-14 08:53:15 +00:00
7bda3b7c8b
- The frequency step was truncated to 61 Hz, while it is FXOSC/(2**19), about 61.035 Hz. The error puts a 915 MHz channel more than 500 kHz away from the requested frequency, outside its own bandwidth. - The low or high frequency front end was left at its reset value, so a board wired for 868 or 915 MHz neither transmitted nor received. - sx127x_rx_watchdog() is only used by the FSK and OOK path but was compiled whenever receive support was on, so a LoRa only configuration failed to build with -Werror. nrf52840-dk:sx127x is such a configuration. Adds the sync word, the default bandwidth and the default spreading factor as configuration options, all defaulting to the previous behaviour, and a page for the driver under components/drivers. Assisted-by: Claude Code 4.8 Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com> |
||
|---|---|---|
| .. | ||
| rn2xx3 | ||
| sx126x | ||
| sx127x | ||
| sx1301 | ||
| CMakeLists.txt | ||
| Kconfig | ||
| Make.defs | ||