Anthony Merlino 1e3a60155e Merged in antmerlino/nuttx/rndis (pull request #980) ... drivers/usbdev/rndis: Expose option to change number of write requests that can be in flight. Approved-by: Gregory Nutt <gnutt@nuttx.org>		2019-08-10 17:52:19 +00:00
..
cdcacm.c	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00
cdcacm.h	drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.	2017-09-22 14:01:00 -06:00
cdcacm_desc.c	Cosmetic spacing and used UNUSEd macro	2017-11-09 12:25:13 -06:00
cdcecm.c	All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.	2018-11-21 07:57:26 -06:00
cdcecm.h	drivers/usbdev/cdcecm.c: Adds USB Device Support for CDC/ECM	2018-08-16 08:49:11 -06:00
composite.c	drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get descriptor" message of type "standard" with a recipient of type "interface". Since the composite driver would only pass messages to the child interfaces when a message was not "standard", this message was not handled. I changed the condition so that the composite driver checks not only if this is a "standard" message but if it is also directed to the device. Otherwise, the handling is delegated to the children of the composite device.	2019-03-26 21:54:01 -06:00
composite.h	Squashed commit of the following:	2017-07-24 16:46:30 -06:00
composite_desc.c	USB device: Rename usbdev_description_s to usbdev_devinfo_s to avoid any more confusion of naming with device descriptions in the future. Instances of usbdev_devinfo_s are now called devinfo vs devdesc when is a bad naming collision.	2017-07-20 09:34:48 -06:00
dfu.c	Updates from coding standard review of PRs 753 and 754	2018-11-09 07:44:22 -06:00
Kconfig	Merged in antmerlino/nuttx/rndis (pull request #980)	2019-08-10 17:52:19 +00:00
Make.defs	NuttX: Add DFU Runtime driver for activating bootloader through USB command.	2018-11-09 14:11:31 +02:00
pl2303.c	Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES	2016-06-11 14:14:08 -06:00
rndis.c	Merged in antmerlino/nuttx/rndis (pull request #980)	2019-08-10 17:52:19 +00:00
rndis_std.h	Remove trailing spaces at the end of lines.	2018-08-13 07:39:38 -06:00
usbdev_strings.c	drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.	2017-09-22 14:01:00 -06:00
usbdev_trace.c	Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.	2018-03-04 08:07:07 -06:00
usbdev_trprintf.c	drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.	2017-09-22 14:01:00 -06:00
usbmsc.c	Merged in alinjerpelea/nuttx (pull request #924)	2019-07-01 11:45:56 +00:00
usbmsc.h	Remove trailing spaces at the end of lines.	2018-08-13 07:39:38 -06:00
usbmsc_desc.c	Cosmetic spacing and used UNUSEd macro	2017-11-09 12:25:13 -06:00
usbmsc_scsi.c	Make sure that labeling is used consistently in all function headers.	2018-02-01 10:00:02 -06:00