| .. |
|
analog
|
Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface.
|
2016-01-29 07:41:23 -06:00 |
|
audio
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
binfmt
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
crypto
|
Add implementatino of Tiny Encryption Algorithm
|
2016-01-19 16:37:45 -06:00 |
|
eeprom
|
|
|
|
fs
|
I2C: Add an I2C character driver
|
2016-02-02 08:30:54 -06:00 |
|
i2c
|
I2C driver should support the RESET method as well
|
2016-02-03 07:32:25 -06:00 |
|
input
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
ioexpander
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
lcd
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
leds
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
mm
|
Add procfs/kmm to show the state of the kernel heap
|
2016-02-06 11:35:30 -06:00 |
|
modem
|
drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy
|
2016-01-30 07:37:43 -06:00 |
|
mtd
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
net
|
nuttx/graphics and include: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-14 15:09:28 -06:00 |
|
nx
|
|
|
|
power
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
sensors
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
|
sercomm
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
serial
|
Implement high level DMA infrastructure for serial devices
|
2015-11-12 14:16:19 -06:00 |
|
spi
|
Remove the final vestiges of up_spiinitialize()
|
2016-01-27 09:27:56 -06:00 |
|
syslog
|
|
|
|
timers
|
Add I2C frequency to the i2c_msg_s structure
|
2016-02-01 14:17:20 -06:00 |
|
usb
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:45:15 -06:00 |
|
video
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
|
wireless
|
Cosmetic changes from review of last pull request
|
2016-01-17 14:52:11 -06:00 |
|
.gitignore
|
|
|
|
addrenv.h
|
|
|
|
arch.h
|
SMP: Cosmetic renaming to clarify functionality of SMP interfaces. Update comments.
|
2016-02-17 13:36:25 -06:00 |
|
ascii.h
|
|
|
|
board.h
|
Add a command to boardctl() to obtain a baord unique ID
|
2015-11-18 07:31:53 -06:00 |
|
can.h
|
Update some comments
|
2016-01-18 16:27:46 -06:00 |
|
clock.h
|
Networking: Remove the HSEC argument from devif_timer.
|
2016-02-03 12:12:41 -06:00 |
|
compiler.h
|
compiler.h: Missing IOBJ/IPTR definitions for the ZDS-II toolchain
|
2016-01-31 12:44:44 -06:00 |
|
configdata.h
|
|
|
|
float.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
|
init.h
|
Update submodule; Improve some comments
|
2016-02-05 10:23:39 -06:00 |
|
irq.h
|
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
|
2016-02-14 16:19:15 -06:00 |
|
kmalloc.h
|
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
|
2016-02-16 19:33:22 -06:00 |
|
kthread.h
|
|
|
|
lib.h
|
|
|
|
math.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
|
math32.h
|
Add more 32-bit math operations; Update ChangeLog
|
2016-01-25 11:19:25 -06:00 |
|
mmcsd.h
|
Remove the final vestiges of up_spiinitialize()
|
2016-01-27 09:27:56 -06:00 |
|
module.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
mqueue.h
|
signals: Basic framework to support SIGEV_THREAD
|
2015-12-30 13:20:31 -06:00 |
|
page.h
|
|
|
|
pgalloc.h
|
|
|
|
poff.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
progmem.h
|
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
|
2015-11-12 13:40:18 -06:00 |
|
pthread.h
|
Update dates on files modified for SIGEV_THREAD support
|
2015-12-30 13:28:39 -06:00 |
|
pwm.h
|
PWM: Add support for multiple output channels per timer
|
2015-11-01 17:15:12 -05:00 |
|
regex.h
|
|
|
|
rwbuffer.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
|
sched.h
|
SMP: Setting bit for wrong CPU. Assertion has cause false alarm crashes..
|
2016-02-18 12:31:21 -06:00 |
|
scsi.h
|
|
|
|
sdio.h
|
|
|
|
semaphore.h
|
Update to use 64-bit timer when available
|
2016-01-21 11:54:26 -06:00 |
|
signal.h
|
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
|
2015-12-30 15:01:14 -06:00 |
|
spawn.h
|
|
|
|
spinlock.h
|
SMP: Add funtions to perform atomic bit set/clear operations; fix two errors in SMP macros
|
2016-02-17 13:20:01 -06:00 |
|
stdarg.h
|
|
|
|
streams.h
|
Introduce support for Atmel toolchain in-flash strings
|
2016-01-05 10:29:29 -06:00 |
|
symtab.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
time.h
|
|
|
|
tree.h
|
|
|
|
userspace.h
|
|
|
|
vt100.h
|
|
|
|
wdog.h
|
The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).
|
2016-01-05 07:58:04 -06:00 |
|
wqueue.h
|
Update to use 64-bit timer when available
|
2016-01-21 11:54:26 -06:00 |
