mirror of
https://github.com/apache/nuttx.git
synced 2026-08-24 15:08:47 +00:00
22cd0d47fa
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
320 lines
8.7 KiB
Makefile
320 lines
8.7 KiB
Makefile
############################################################################
|
|
# arch/sim/src/Makefile
|
|
#
|
|
# Copyright (C) 2007, 2008, 2011-2012, 2014, 2016 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
|
|
-include $(TOPDIR)/Make.defs
|
|
|
|
CPPFLAGS += -I$(TOPDIR)/sched $(EXTRADEFINES)
|
|
CFLAGS += -I$(TOPDIR)/sched $(EXTRADEFINES)
|
|
CXXFLAGS += -I$(TOPDIR)/sched $(EXTRADEFINES)
|
|
|
|
ASRCS =
|
|
|
|
ifeq ($(CONFIG_HOST_X86_64),y)
|
|
ifeq ($(CONFIG_SIM_M32),y)
|
|
ASRCS += up_setjmp32.S
|
|
else
|
|
ASRCS += up_setjmp64.S
|
|
endif
|
|
else ifeq ($(CONFIG_HOST_X86),y)
|
|
ASRCS += up_setjmp32.S
|
|
else ifeq ($(CONFIG_HOST_ARM),y)
|
|
ASRCS += up_setjmp_arm.S
|
|
endif
|
|
|
|
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
|
|
|
CSRCS = up_initialize.c up_idle.c up_interruptcontext.c up_initialstate.c
|
|
CSRCS += up_createstack.c up_usestack.c up_releasestack.c up_stackframe.c
|
|
CSRCS += up_unblocktask.c up_blocktask.c up_releasepending.c
|
|
CSRCS += up_reprioritizertr.c up_exit.c up_schedulesigaction.c up_spiflash.c
|
|
CSRCS += up_allocateheap.c up_devconsole.c up_qspiflash.c
|
|
|
|
HOSTSRCS = up_hostusleep.c
|
|
|
|
ifeq ($(CONFIG_SCHED_TICKLESS),y)
|
|
CSRCS += up_tickless.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SPINLOCK),y)
|
|
HOSTSRCS += up_testset.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SMP),y)
|
|
CSRCS += up_smpsignal.c up_smphook.c up_cpuidlestack.c
|
|
HOSTSRCS += up_simsmp.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SCHED_INSTRUMENTATION),y)
|
|
ifneq ($(CONFIG_SCHED_INSTRUMENTATION_BUFFER),y)
|
|
CSRCS += up_schednote.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_DEV_CONSOLE),y)
|
|
CSRCS += up_uartwait.c
|
|
HOSTSRCS += up_simuart.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ONESHOT),y)
|
|
CSRCS += up_oneshot.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NX_LCDDRIVER),y)
|
|
CSRCS += board_lcd.c
|
|
else
|
|
CSRCS += up_framebuffer.c
|
|
ifeq ($(CONFIG_SIM_X11FB),y)
|
|
HOSTSRCS += up_x11framebuffer.c
|
|
ifeq ($(CONFIG_SIM_TOUCHSCREEN),y)
|
|
CSRCS += up_touchscreen.c
|
|
HOSTSRCS += up_x11eventloop.c
|
|
else
|
|
ifeq ($(CONFIG_SIM_AJOYSTICK),y)
|
|
CSRCS += up_ajoystick.c
|
|
HOSTSRCS += up_x11eventloop.c
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SIM_IOEXPANDER),y)
|
|
CSRCS += up_ioexpander.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_FS_FAT),y)
|
|
CSRCS += up_blockdevice.c up_deviceimage.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_ROMGETC),y)
|
|
CSRCS += up_romgetc.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SIM_NETDEV),y)
|
|
ifeq ($(CONFIG_NET_ETHERNET),y)
|
|
CSRCS += up_netdriver.c
|
|
HOSTCFLAGS += -DNETDEV_BUFSIZE=$(CONFIG_NET_ETH_PKTSIZE)
|
|
ifneq ($(HOSTOS),Cygwin)
|
|
HOSTSRCS += up_tapdev.c up_netdev.c
|
|
ifeq ($(CONFIG_SIM_NET_BRIDGE),y)
|
|
HOSTCFLAGS += -DCONFIG_SIM_NET_BRIDGE
|
|
HOSTCFLAGS += -DCONFIG_SIM_NET_BRIDGE_DEVICE=\"$(CONFIG_SIM_NET_BRIDGE_DEVICE)\"
|
|
endif
|
|
ifeq ($(CONFIG_SIM_NET_HOST_ROUTE),y)
|
|
HOSTCFLAGS += -DCONFIG_SIM_NET_HOST_ROUTE
|
|
endif
|
|
else # HOSTOS != Cygwin
|
|
HOSTSRCS += up_wpcap.c up_netdev.c
|
|
DRVLIB = /lib/w32api/libws2_32.a /lib/w32api/libiphlpapi.a
|
|
endif # HOSTOS != Cygwin
|
|
endif # CONFIG_NET_ETHERNET
|
|
endif # CONFIG_SIM_NETDEV
|
|
|
|
ifeq ($(CONFIG_SMP),y)
|
|
HOSTCFLAGS += -DCONFIG_SMP=1 -DCONFIG_SMP_NCPUS=$(CONFIG_SMP_NCPUS)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_FS_HOSTFS),y)
|
|
HOSTSRCS += up_hostfs.c
|
|
|
|
up_hostfs.c: hostfs.h
|
|
|
|
hostfs.h: $(TOPDIR)/include/nuttx/fs/hostfs.h
|
|
@echo "CP: $<"
|
|
$(Q) cp $< $@
|
|
endif
|
|
|
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
|
|
|
NUTTXOBJS = $(AOBJS) $(COBJS)
|
|
HOSTOBJS = $(HOSTSRCS:.c=$(OBJEXT))
|
|
|
|
SRCS = $(ASRCS) $(CSRCS) $(HOSTSRCS)
|
|
OBJS = $(AOBJS) $(COBJS) $(HOSTOBJS)
|
|
|
|
# Determine which standard libraries will need to be linked in
|
|
|
|
ifeq ($(CONFIG_SIM_X11FB),y)
|
|
STDLIBS += -lX11 -lXext
|
|
endif
|
|
|
|
# Override in Make.defs if linker is not 'ld'
|
|
|
|
LDSTARTGROUP ?= --start-group
|
|
LDENDGROUP ?= --end-group
|
|
|
|
EXTRA_LIBS ?=
|
|
EXTRA_LIBPATHS ?=
|
|
|
|
ifeq ($(CONFIG_FS_FAT),y)
|
|
STDLIBS += -lz
|
|
endif
|
|
|
|
STDLIBS += -lc
|
|
STDLIBS += -lpthread
|
|
|
|
# Determine which objects are required in the link. The
|
|
# up_head object normally draws in all that is needed, but
|
|
# there are a fews that must be included because they
|
|
# are called only from the host OS-specific logic (HOSTOBJS)
|
|
|
|
LINKOBJS = up_head$(OBJEXT)
|
|
REQUIREDOBJS = $(LINKOBJS)
|
|
|
|
ifeq ($(CONFIG_DEV_CONSOLE),y)
|
|
REQUIREDOBJS += up_uartwait$(OBJEXT)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SIM_X11FB),y)
|
|
ifeq ($(CONFIG_SIM_TOUCHSCREEN),y)
|
|
REQUIREDOBJS += up_touchscreen$(OBJEXT)
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SMP),y)
|
|
REQUIREDOBJS += up_smpsignal$(OBJEXT) up_smphook$(OBJEXT)
|
|
endif
|
|
|
|
# Determine which NuttX libraries will need to be linked in
|
|
# Most are provided by LINKLIBS on the MAKE command line
|
|
|
|
LINKLIBS ?=
|
|
RELLIBS = $(patsubst %.a,%,$(patsubst lib%,-l%,$(LINKLIBS)))
|
|
RELPATHS += -L"$(TOPDIR)/staging"
|
|
|
|
# Add the board-specific library and directory
|
|
|
|
LIBPATHS += -L board
|
|
RELPATHS += -L board
|
|
RELLIBS += -lboard
|
|
|
|
# Make targets begin here
|
|
|
|
all: up_head$(OBJEXT) libarch$(LIBEXT)
|
|
|
|
.PHONY: board/libboard$(LIBEXT) export_startup clean distclean cleanrel depend
|
|
|
|
$(AOBJS): %$(OBJEXT): %.S
|
|
$(call ASSEMBLE, $<, $@)
|
|
|
|
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
|
$(call COMPILE, $<, $@)
|
|
|
|
$(HOSTOBJS): %$(OBJEXT): %.c
|
|
$(Q) echo "CC: $<"
|
|
$(Q) "$(CC)" -c $(HOSTCFLAGS) $< -o $@
|
|
|
|
# The architecture-specific library
|
|
|
|
libarch$(LIBEXT): $(NUTTXOBJS)
|
|
$(call ARCHIVE, $@, $(NUTTXOBJS))
|
|
|
|
# The "board"-specific library. Of course, there really are no boards in
|
|
# the simulation. However, this is a good place to keep parts of the simulation
|
|
# that are not hardware-related.
|
|
|
|
board/libboard$(LIBEXT):
|
|
$(Q) $(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRADEFINES=$(EXTRADEFINES)
|
|
|
|
# A partially linked object containing only NuttX code (no interface to host OS)
|
|
# Change the names of most symbols that conflict with libc symbols.
|
|
|
|
GNU:
|
|
$(Q) mkdir -p ./GNU
|
|
|
|
GNU/Linux-names.dat: GNU nuttx-names.dat
|
|
$(Q) cp nuttx-names.dat $@
|
|
|
|
Msys-names.dat: GNU nuttx-names.dat
|
|
$(Q) cp nuttx-names.dat $@
|
|
|
|
Cygwin-names.dat: nuttx-names.dat
|
|
ifeq ($())CONFIG_SIM_CYGWIN_DECORATED),y)
|
|
$(Q) cat $^ | sed -e "s/^/_/g" >$@
|
|
else
|
|
$(Q) cp nuttx-names.dat $@
|
|
endif
|
|
|
|
nuttx.rel : libarch$(LIBEXT) board/libboard$(LIBEXT) $(HOSTOS)-names.dat $(LINKOBJS)
|
|
$(Q) echo "LD: nuttx.rel"
|
|
$(Q) $(LD) -r $(LDLINKFLAGS) $(RELPATHS) $(EXTRA_LIBPATHS) -o $@ $(REQUIREDOBJS) $(LDSTARTGROUP) $(RELLIBS) $(EXTRA_LIBS) $(LDENDGROUP)
|
|
$(Q) $(OBJCOPY) --redefine-syms=$(HOSTOS)-names.dat $@
|
|
|
|
# Generate the final NuttX binary by linking the host-specific objects with the NuttX
|
|
# specific objects (with munged names)
|
|
|
|
nuttx$(EXEEXT): cleanrel nuttx.rel $(HOSTOBJS)
|
|
$(Q) echo "LD: nuttx$(EXEEXT)"
|
|
$(Q) "$(CC)" $(CCLINKFLAGS) $(LIBPATHS) -o $(TOPDIR)/$@ nuttx.rel $(HOSTOBJS) $(DRVLIB) $(STDLIBS)
|
|
$(Q) $(NM) $(TOPDIR)/$@ | \
|
|
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
|
|
sort > $(TOPDIR)/System.map
|
|
$(Q) rm -f nuttx.rel
|
|
|
|
# This is part of the top-level export target
|
|
|
|
export_startup: board/libboard$(LIBEXT) up_head.o $(HOSTOBJS)
|
|
cp up_head.o $(HOSTOBJS) ${EXPORT_DIR}/startup
|
|
cp nuttx-names.dat ${EXPORT_DIR}/libs
|
|
echo main NXmain >> ${EXPORT_DIR}/libs/nuttx-names.dat
|
|
|
|
# Dependencies
|
|
|
|
.depend: Makefile $(SRCS)
|
|
$(Q) $(MKDEP) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep
|
|
$(Q) touch $@
|
|
|
|
depend: .depend
|
|
|
|
cleanrel:
|
|
$(Q) rm -f nuttx.rel GNU/Linux-names.dat Cygwin-names.dat
|
|
|
|
clean: cleanrel
|
|
$(Q) if [ -e board/Makefile ]; then \
|
|
$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
|
|
fi
|
|
$(call DELFILE, nuttx.rel)
|
|
$(call DELFILE, libarch$(LIBEXT))
|
|
$(call CLEAN)
|
|
|
|
distclean: clean
|
|
$(Q) if [ -e board/Makefile ]; then \
|
|
$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
|
|
fi
|
|
$(call DELFILE, Make.dep)
|
|
$(call DELFILE, .depend)
|
|
$(call DELFILE, hostfs.h)
|
|
$(Q) rm -rf GNU
|
|
|
|
-include Make.dep
|