mirror of
https://github.com/apache/nuttx.git
synced 2026-10-03 20:27:53 +00:00
Some checks are pending
MemBrowse Memory Report / changes-filter (push) Waiting to run
MemBrowse Memory Report / load-targets (push) Waiting to run
MemBrowse Memory Report / identical (push) Blocked by required conditions
MemBrowse Memory Report / analyze (push) Blocked by required conditions
This change fixes NuttX’s CMake support when NuttX is embedded in another project via add_subdirectory(). CMake’s CMAKE_SOURCE_DIR and CMAKE_BINARY_DIR refer to the outermost project, causing NuttX to access its .config, generated files, host tools, and build artifacts in the parent project’s directories. The fix introduces NUTTX_DIR and NUTTX_BINARY_DIR, based on CMAKE_CURRENT_SOURCE_DIR and CMAKE_CURRENT_BINARY_DIR, and consistently uses them for NuttX self-references while preserving existing standalone builds. It fixes the Kconfig initialization failure reported in #19697 and allows an embedded sim:nsh build to configure, build, and boot successfully. The change affects only the CMake build system (not Make or Kconfig defaults), requires the corresponding nuttx-apps change, and does not extend add_subdirectory() support to cross-compiled non-sim boards due to CMake’s toolchain-file limitation. Fixes #19697. Assisted-by: Claude:claude-sonnet-5 Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
205 lines
7 KiB
CMake
205 lines
7 KiB
CMake
# ##############################################################################
|
|
# libs/libbuiltin/compiler-rt/CMakeLists.txt
|
|
#
|
|
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
|
|
# license agreements. See the NOTICE file distributed with this work for
|
|
# additional information regarding copyright ownership. The ASF licenses this
|
|
# file to you under the Apache License, Version 2.0 (the "License"); you may not
|
|
# use this file except in compliance with the License. You may obtain a copy of
|
|
# the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
# License for the specific language governing permissions and limitations under
|
|
# the License.
|
|
#
|
|
# ##############################################################################
|
|
|
|
if(CONFIG_LIB_COMPILER_RT)
|
|
|
|
if(NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/compiler-rt)
|
|
|
|
set(COMPILER_RT_VERSION ${CONFIG_LIB_COMPILER_RT_VERSION})
|
|
|
|
FetchContent_Declare(
|
|
compiler-rt
|
|
DOWNLOAD_NAME "compiler-rt-${COMPILER_RT_VERSION}.src.tar.xz"
|
|
DOWNLOAD_DIR ${CMAKE_CURRENT_LIST_DIR}
|
|
URL "https://github.com/llvm/llvm-project/releases/download/llvmorg-${COMPILER_RT_VERSION}/compiler-rt-${COMPILER_RT_VERSION}.src.tar.xz"
|
|
SOURCE_DIR
|
|
${CMAKE_CURRENT_LIST_DIR}/compiler-rt
|
|
BINARY_DIR
|
|
${NUTTX_BINARY_DIR}/libs/libbuiltin/compiler-rt
|
|
CONFIGURE_COMMAND
|
|
""
|
|
BUILD_COMMAND
|
|
""
|
|
INSTALL_COMMAND
|
|
""
|
|
TEST_COMMAND
|
|
""
|
|
DOWNLOAD_NO_PROGRESS true
|
|
TIMEOUT 100)
|
|
|
|
FetchContent_GetProperties(compiler-rt)
|
|
|
|
if(NOT compiler-rt_POPULATED)
|
|
FetchContent_Populate(compiler-rt)
|
|
endif()
|
|
|
|
endif()
|
|
|
|
endif()
|
|
|
|
if(CONFIG_ARCH_ARM)
|
|
set(ARCH arm)
|
|
elseif(CONFIG_ARCH_RISCV)
|
|
set(ARCH riscv)
|
|
elseif(CONFIG_ARCH_X86_64)
|
|
set(ARCH x86_64)
|
|
elseif(CONFIG_ARCH_ARM64)
|
|
set(ARCH aarch64)
|
|
endif()
|
|
|
|
list(APPEND INCDIR ${CMAKE_CURRENT_LIST_DIR}/compiler-rt/include)
|
|
|
|
if(CONFIG_BUILTIN_COMPILER_RT)
|
|
|
|
nuttx_add_system_library(rt.builtins)
|
|
|
|
target_include_directories(
|
|
rt.builtins PRIVATE ${INCDIR}
|
|
${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/builtins)
|
|
|
|
target_compile_options(rt.builtins PRIVATE -Wno-undef -Wno-macro-redefined)
|
|
|
|
set(SRCSTMP)
|
|
set(RT_BUILTINS_SRCS)
|
|
set(BUILTINS_DIR ${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/builtins)
|
|
|
|
file(GLOB RT_BUILTINS_SRCS ${BUILTINS_DIR}/*.c)
|
|
|
|
file(GLOB SRCSTMP ${BUILTINS_DIR}/${ARCH}/*.S)
|
|
list(APPEND RT_BUILTINS_SRCS ${SRCSTMP})
|
|
|
|
file(GLOB SRCSTMP ${BUILTINS_DIR}/${ARCH}/*.c)
|
|
list(APPEND RT_BUILTINS_SRCS ${SRCSTMP})
|
|
|
|
if(NOT CONFIG_LIB_COMPILER_RT_HAS_BFLOAT16)
|
|
set(RT_BUILTINS_BFLOAT16_SRCS ${BUILTINS_DIR}/truncdfbf2.c
|
|
${BUILTINS_DIR}/truncsfbf2.c)
|
|
list(REMOVE_ITEM RT_BUILTINS_SRCS ${RT_BUILTINS_BFLOAT16_SRCS})
|
|
endif()
|
|
|
|
set(x86_80_BIT_SOURCES
|
|
${BUILTINS_DIR}/divxc3.c
|
|
${BUILTINS_DIR}/extendxftf2.c
|
|
${BUILTINS_DIR}/fixxfdi.c
|
|
${BUILTINS_DIR}/fixxfti.c
|
|
${BUILTINS_DIR}/fixunsxfdi.c
|
|
${BUILTINS_DIR}/fixunsxfsi.c
|
|
${BUILTINS_DIR}/fixunsxfti.c
|
|
${BUILTINS_DIR}/floatdixf.c
|
|
${BUILTINS_DIR}/floattixf.c
|
|
${BUILTINS_DIR}/floatundixf.c
|
|
${BUILTINS_DIR}/floatuntixf.c
|
|
${BUILTINS_DIR}/mulxc3.c
|
|
${BUILTINS_DIR}/powixf2.c
|
|
${BUILTINS_DIR}/trunctfxf2.c)
|
|
|
|
if(NOT CONFIG_ARCH_X86_64)
|
|
list(REMOVE_ITEM RT_BUILTINS_SRCS ${x86_80_BIT_SOURCES})
|
|
endif()
|
|
|
|
# The Arm builtins ship hand-written VFP assembly whose FPU requirements the
|
|
# globs above ignore, so assemble only the files the configured FPU supports
|
|
# (upstream compiler-rt selects them conditionally). chkstk.S and chkstk2.S
|
|
# are Windows/MinGW-only stack probes; every *vfp.S needs a hardware FPU; and
|
|
# the double-precision *df*vfp.S routines additionally need a double-precision
|
|
# FPU. Without this, single-precision-FPU targets such as Cortex-M33
|
|
# (fpv5-sp-d16) fail with "selected FPU does not support instruction". See
|
|
# apache/nuttx#17386.
|
|
if(CONFIG_ARCH_ARM)
|
|
set(RT_BUILTINS_ARM_EXCLUDE ${BUILTINS_DIR}/arm/chkstk.S
|
|
${BUILTINS_DIR}/arm/chkstk2.S)
|
|
if(NOT CONFIG_ARCH_FPU)
|
|
file(GLOB RT_BUILTINS_ARM_VFP ${BUILTINS_DIR}/arm/*vfp.S)
|
|
list(APPEND RT_BUILTINS_ARM_EXCLUDE ${RT_BUILTINS_ARM_VFP})
|
|
elseif(NOT CONFIG_ARCH_DPFPU)
|
|
list(
|
|
APPEND
|
|
RT_BUILTINS_ARM_EXCLUDE
|
|
${BUILTINS_DIR}/arm/adddf3vfp.S
|
|
${BUILTINS_DIR}/arm/divdf3vfp.S
|
|
${BUILTINS_DIR}/arm/eqdf2vfp.S
|
|
${BUILTINS_DIR}/arm/extendsfdf2vfp.S
|
|
${BUILTINS_DIR}/arm/fixdfsivfp.S
|
|
${BUILTINS_DIR}/arm/fixunsdfsivfp.S
|
|
${BUILTINS_DIR}/arm/floatsidfvfp.S
|
|
${BUILTINS_DIR}/arm/floatunssidfvfp.S
|
|
${BUILTINS_DIR}/arm/gedf2vfp.S
|
|
${BUILTINS_DIR}/arm/gtdf2vfp.S
|
|
${BUILTINS_DIR}/arm/ledf2vfp.S
|
|
${BUILTINS_DIR}/arm/ltdf2vfp.S
|
|
${BUILTINS_DIR}/arm/muldf3vfp.S
|
|
${BUILTINS_DIR}/arm/nedf2vfp.S
|
|
${BUILTINS_DIR}/arm/subdf3vfp.S
|
|
${BUILTINS_DIR}/arm/truncdfsf2vfp.S
|
|
${BUILTINS_DIR}/arm/unorddf2vfp.S)
|
|
endif()
|
|
list(REMOVE_ITEM RT_BUILTINS_SRCS ${RT_BUILTINS_ARM_EXCLUDE})
|
|
endif()
|
|
|
|
if(NOT CONFIG_COVERAGE_NONE)
|
|
target_compile_options(rt.builtins PRIVATE -fno-profile-instr-generate
|
|
-fno-coverage-mapping)
|
|
endif()
|
|
|
|
target_sources(rt.builtins PRIVATE ${RT_BUILTINS_SRCS})
|
|
|
|
endif()
|
|
|
|
if(CONFIG_COVERAGE_COMPILER_RT)
|
|
|
|
nuttx_add_system_library(rt.profile)
|
|
|
|
target_include_directories(
|
|
rt.profile PRIVATE ${INCDIR}
|
|
${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/profile)
|
|
|
|
target_compile_options(rt.profile PRIVATE -fno-profile-instr-generate
|
|
-fno-coverage-mapping)
|
|
|
|
target_compile_options(rt.profile PRIVATE -DCOMPILER_RT_HAS_UNAME -Wno-undef
|
|
-Wno-strict-prototypes -Wno-shadow)
|
|
|
|
if(APPLE)
|
|
target_compile_options(rt.profile PRIVATE -D__APPLE__)
|
|
endif()
|
|
|
|
set(SRCSTMP)
|
|
set(RT_PROFILE_SRCS InstrProfilingPlatform.c)
|
|
|
|
file(GLOB SRCSTMP ${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/profile/*.c)
|
|
list(APPEND RT_PROFILE_SRCS ${SRCSTMP})
|
|
|
|
file(GLOB SRCSTMP ${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/profile/*.cpp)
|
|
list(APPEND RT_PROFILE_SRCS ${SRCSTMP})
|
|
|
|
target_sources(rt.profile PRIVATE ${RT_PROFILE_SRCS})
|
|
|
|
elseif(CONFIG_COVERAGE_MINI AND CONFIG_ARCH_TOOLCHAIN_CLANG)
|
|
nuttx_add_system_library(rt.miniprofile)
|
|
|
|
target_include_directories(
|
|
rt.miniprofile PRIVATE ${INCDIR}
|
|
${CMAKE_CURRENT_LIST_DIR}/compiler-rt/lib/profile)
|
|
|
|
target_compile_options(rt.miniprofile PRIVATE -fno-profile-instr-generate
|
|
-fno-coverage-mapping)
|
|
|
|
target_sources(rt.miniprofile PRIVATE ${CMAKE_CURRENT_LIST_DIR}/coverage.c)
|
|
endif()
|