nuttx/Documentation/platforms/arm/rtl8721f
dechao_gong c36e45eb6f arch/arm/rtl8721f: add timer driver support
Wire the RTL8721F (amebagreen2) into the shared Ameba timer driver
(arch/arm/src/common/ameba/ameba_timer.c), registered at /dev/timer0
(TIM1) and /dev/timer1 (TIM2).  Only the per-chip base addresses, RCC
masks and IRQs differ, so this adds a small ameba_timer_chip.h (the two
32-bit basic LTIM timers at 0x40819200 / 0x40819400, 32.768 kHz,
APBPeriph_LTIM1/2, IRQ_TIMER1/2, verified against the SoC hal_platform.h
/ sysreg_lsys.h / vector table) plus the Make.defs/CMakeLists build
hooks, the fwlib ram_common/ameba_tim.c RAM source (now also pulled in
by CONFIG_AMEBA_TIMER, matching the PWM rule), the board bring-up
registration and a timer defconfig.  The shared driver is unchanged.

TIM0 is left untouched because the boot ROM claims it as the always-on
system timer; reprogramming it would break every SDK delay.

Assisted-by: Claude <noreply@anthropic.com>
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
2026-09-01 17:41:14 +08:00
..
boards/rtl8721f_evb arch/arm/rtl8721f: add timer driver support 2026-09-01 17:41:14 +08:00
index.rst