mirror of
https://github.com/apache/nuttx.git
synced 2026-10-06 05:47:54 +00:00
3efaf80d3d
* Initial experimental / work in progress implementation. * New board name is esp32s3-ws-lcd128. * Supports Kconfig delectable w/wo touch variants (lcd gpios difference). * IMU QMI8658 bringups is put into esp32s3/common/src to share with other boards. Pin defines are located at <board>include/board.h and referenced with `#include <arch/board/board.h>`. * Supported configurations: nsh, ostest, coremark, touch-lvgl, notouch-lvgl, imu-qmi8658, watchdog. * Does not have touch panel driver yet. * Created board documentation. Added sphinx inline cross-references. * TODO: Fix SPI GC9A01A LCD pixel format colors. * TODO: Create I2C CST816S touch panel driver. Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
35 lines
1.7 KiB
ReStructuredText
35 lines
1.7 KiB
ReStructuredText
.. _ostest:
|
||
|
||
==================
|
||
``ostest`` OS test
|
||
==================
|
||
|
||
This is the NuttX _qualification_ suite. It attempts to exercise a broad set of
|
||
OS functionality. Its coverage is not very extensive as of this writing, but it
|
||
is used to qualify each NuttX release.
|
||
|
||
The behavior of the ``ostest`` can be modified with the following settings in the
|
||
``boards/<arch>/<chip>/<board>/configs/<config>/defconfig`` file:
|
||
|
||
- ``CONFIG_NSH_BUILTIN_APPS`` – Build the OS test example as an NSH built-in
|
||
application.
|
||
- ``CONFIG_TESTING_OSTEST_LOOPS`` – Used to control the number of executions of
|
||
the test. If undefined, the test executes one time. If defined to be zero,
|
||
the test runs forever.
|
||
|
||
- ``CONFIG_TESTING_OSTEST_STACKSIZE`` – Used to create the ostest task. Default is
|
||
``8192``.
|
||
- ``CONFIG_TESTING_OSTEST_NBARRIER_THREADS`` – Specifies the number of threads to
|
||
create in the barrier test. The default is 8 but a smaller number may be
|
||
needed on systems without sufficient memory to start so many threads.
|
||
|
||
- ``CONFIG_TESTING_OSTEST_RR_RANGE`` – During round-robin scheduling test two
|
||
threads are created. Each of the threads searches for prime numbers in the
|
||
configurable range, doing that configurable number of times. This value
|
||
specifies the end of search range and together with number of runs allows to
|
||
configure the length of this test – it should last at least a few tens of
|
||
seconds. Allowed values ``[1; 32767]``, default ``10000``.
|
||
|
||
- ``CONFIG_TESTING_OSTEST_RR_RUNS`` – During round-robin scheduling test two
|
||
threads are created. Each of the threads searches for prime numbers in the
|
||
configurable range, doing that configurable number of times.
|