Merged in juniskane/nuttx_stm32l4/stm32l4_adc_kconfig_pr (pull request #478 )
2017-09-06 22:05:44 +00:00
include/nuttx/audio: Remove CONFIG_SCHED_WORKQUEUE check in pcm.h
2017-11-23 19:59:07 +09:00
Documentation and comments updated to further enshrine exec() as an official NuttX interface.
2017-10-03 07:52:05 -06:00
MCP1515: Eliminate some warnings
2017-06-14 09:38:58 -06:00
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Add entropy pool and strong random number generator
2017-03-30 07:38:37 -06:00
Move SMPS driver to drivers/power (and header to include/nuttx/power). Rename debug to IOCTLs to more general power naming; create a separate file to coordinate power-related IOCTL commands.
2017-07-23 07:35:09 -06:00
Squashed commit of the following:
2018-01-03 16:03:56 -06:00
Changes from review of PR 114
2016-08-14 13:38:47 -06:00
drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional.
2017-12-18 08:58:07 -06:00
configs/stm32f103-minimum: Remove nonsensical #error.
2018-01-09 11:17:01 -06:00
drivers/lcd/max7219.c: Add support to MAX7219 LED Matrix as LCD interface
2017-11-04 07:54:48 -06:00
Add driver for APA102 LED controller. These LEDs are used on LED Strips and are controlled over SPI.
2017-09-18 16:48:55 -06:00
libm: Port gamma() and lgamma() from FreeBSD to NuttX.
2017-08-08 07:02:39 -06:00
mm: Add a debug assertin to check for integer overflow in malloc.
2017-11-21 07:24:10 -06:00
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
drivers/mtd: Add a driver for Macronix MX35LFxGE4AB serial NAND flash.
2017-11-29 07:15:36 -06:00
arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however.
2017-12-31 11:11:57 -06:00
Kconfigs: Add CONFIG_LCD_UPDATE that works like CONFIG_NX_UPDATE but can be enabled without enabling the graphics subsystem.
2017-11-04 14:08:21 -06:00
drivers/power/bq2429x.c: Add trickle charging mode
2017-12-18 06:38:41 -06:00
drivers/sensors/apds9960.c: Use work_queue to read/process data when receive an IRQ
2017-10-20 08:54:44 -06:00
Squashed commit of the following:
2017-07-28 12:01:05 -06:00
arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations.
2018-01-14 12:09:26 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Cosmetic fixes to comments, README, and other trivial corrections.
2017-12-25 10:45:47 -06:00
drivers/usbdev: Add RNDIS-over-USB driver
2017-09-24 07:24:34 -06:00
Framebuffer Driver: Small modification convention for multi-planar displays (of which there are none).
2017-11-29 07:06:53 -06:00
Merged in antmerlino/nuttx/mac802154dev-header-offset (pull request #538 )
2017-11-22 18:22:35 +00:00
Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h
2017-05-13 16:53:55 -06:00
ASCII: Improve some naming
2016-04-14 16:20:36 -06:00
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
2018-01-17 09:33:28 -06:00
task: Add new cancellation point interface, check_cancellation_point().
2017-10-09 09:43:04 -06:00
procfs: Fix uptime being close to maximum 32-bit value in certain config
2017-11-10 09:01:39 -06:00
compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.
2017-10-02 07:09:31 -06:00
enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized
2016-05-18 09:17:01 -06:00
sched/irq: Add a configuration option to show interrupt information via a procfs file.
2018-01-12 18:26:46 -06:00
profcs: At file to should user space heap. This replaces the NSH free command.
2017-11-13 12:51:33 -06:00
kthread_create(): Rename kernel_thread() to kthread_create() for better naming consistency with task_create() and kthread_delete().
2017-10-16 11:38:00 -06:00
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Module names are not needed in libc/modlib when the module library is used only for shared library support.
2017-01-29 12:23:24 -06:00
mqueue.h edited online with Bitbucket
2017-10-11 02:49:20 +00:00
mm/mm_gran: Add a function to get information about the state of the granuale allocator.
2017-11-14 14:41:03 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation.
2017-11-13 09:08:39 -06:00
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
sched: move POSIX thread specific data from pthread TCB to common TCB structure. This change allows using pthread_getspecific/pthread_setspecific from main thread. Patch also enables using pthread data with config option CONFIG_DISABLE_PTHREAD=y.
2017-10-25 07:06:42 -06:00
Update ChangeLog in prep for 7.20 release.
2017-03-08 10:09:48 -06:00
arch/arm/src/lkpc54xx: In SDMMC driver, fix an error which was clobbering the interrupt mask register (xfrmask). Also, add a kludge for the missing DTO interrupt.
2017-12-20 18:39:10 -06:00
libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.
2017-10-08 12:14:18 -06:00
libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.
2017-10-08 12:14:18 -06:00
SMP: Introduce spin_lock_wo_note() and spin_unlock_wo_note()
2018-01-17 13:29:42 +09:00
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
2015-12-13 08:10:01 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
TLS: Simplify
2016-03-11 07:17:32 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Update some wdog-related comments
2017-02-24 10:58:37 -06:00
work_queue() must cancel existing work prior to queuing new work, otherwise the work queue can become corrupted. Problem noted by Pascal Speck.
2017-08-28 07:46:48 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
301bf1ee77