ouyangxiangzhen 6f72f5481d sched/wqueue: Refactor delayed and periodical workqueue. ... This commit refactors the logic of workqueue processing delayed and periodic work, and changes the timer to be set in `work_thread`. The improvements of this change are as follows: - Fixed the memory reuse problem of the original periodic workqueue implementation. - By removing the `wdog_s` structure in the `work_s` structure, the memory overhead of each `work_s` structure is reduced by about 30 bytes. - Set the timer for each workqueue instead of each work, which improves system performance. - Simplified the workqueue cancel logic. Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>		2025-05-07 02:02:10 +08:00
..
1wire
aie
analog	drivers/analog/mcp47x6: Add support for MCP47X6 DAC series	2025-04-29 16:17:44 -03:00
audio	nuttx/audio: add fake audio driver.	2024-12-20 11:47:08 -03:00
binfmt	libc/elf: rename modlib to libelf	2025-04-11 09:43:22 +08:00
can	nuttx/can: Modify poll logic to bind can_reader_s and pollfd.	2025-02-12 10:28:21 -03:00
clk
contactless
coresight
crypto
dma
drivers	bch: add BIOC_DISCARD ioctl that discards cached sector	2025-01-23 02:35:46 +08:00
eeprom
efuse
fs	typo: fix incorrect doc	2025-03-12 10:36:30 -03:00
himem
hwspinlock
i2c
i3c
input	nuttx: add open and close callback functions for the mouse.	2025-01-17 09:19:18 +08:00
ioexpander	drivers/ioexpander/icjx: add option to set filters during initialization	2025-04-24 10:05:56 -03:00
lcd
leds
lib	libc/elf: rename modlib to libelf	2025-04-11 09:43:22 +08:00
math
mbox
mm	Revert "mm_heap: double malloced memory default alignment (4 -> 8, 8 -> 16)"	2025-01-09 00:00:11 +08:00
modem
motor
mtd	driver/mtd: ramtron multi-device spi bus support	2025-03-26 19:26:01 +08:00
net	h7: eth: add checks for PHYID in stm32_phyinit	2025-02-12 15:00:19 -03:00
note
nx
pci
pinctrl
power
rc
regmap
reset	drivers/reset: fix typo retrun -> return	2024-12-17 20:48:07 +08:00
rf
rmt
rpmsg	rpmsg/rpmsg_virtio_lite: rename rpmsg_virtio to rpmsg_virtio_lite	2024-12-28 22:43:20 -03:00
rptun	rptun_bmp: add remote_cpu to rptun_secure_init	2025-01-14 13:34:35 +08:00
segger
sensors	sensors/nau7802: Add support for the NAU7802	2025-04-01 09:38:37 +08:00
serial	serial: Add struct serial_icounter_s and CONFIG_SERIAL_TIOCGICOUNT	2025-02-14 18:24:47 +01:00
spi	Add GD55 QSPI NOR Flash support	2025-01-17 09:07:22 +08:00
syslog
timers	drivers/pwm: add PWMIOC_FAULTS_FETCH_AND_CLEAR ioctl for fault clears	2025-02-27 11:47:51 -03:00
usb	driver/syslog: add cdcacm channel	2025-03-10 13:43:54 +08:00
usrsock
vhost
video	drivers/video/fb.c: Add startup splashscreen option	2025-04-30 06:38:05 -03:00
virtio
wireless	nuttx/wireless/ioctl: Common IOCTL API for RF Modulation Technologies.	2025-03-23 17:51:15 +08:00
.gitignore
addrenv.h	modlib/gnu-elf.ld.in: fix regression with armv7a	2025-01-17 23:16:26 +08:00
allsyms.h
arch.h	libc/stream: Support lowsyslog.	2025-04-02 12:01:46 +08:00
ascii.h
atexit.h
atomic.h	include/nuttx/atomic.h: For each ATOMIC func, cast the parameters to (FAR intXX_t *) of correct size	2025-04-17 20:14:15 +08:00
bits.h
board.h
cache.h
can.h
cancelpt.h
circbuf.h	lib/circbuf: add static initialize macro helper	2024-12-17 20:48:23 +08:00
clock.h	nuttx/clock: make NSEC_PER_USEC and others long	2025-04-02 08:29:00 -03:00
compiler.h	nuttx/compiler: replace AVR __flash qualifier with __memx for some chips	2025-04-27 13:07:45 +08:00
coredump.h	coredump: fix issue that nvic region overlapped by board memory region	2025-01-24 09:15:56 +08:00
crc8.h
crc16.h	libs/libc/crc16: Separate implementation of crc16xmodem from crc16	2025-04-10 16:47:28 +08:00
crc32.h
crc64.h
elf.h
environ.h
envpath.h
ethtool.h
event.h
fdcheck.h
fdt.h	qemu/armv7a: register cfi flash	2025-02-11 17:23:44 +08:00
gdbstub.h	gdbstub: change send buffer to const char	2025-01-20 20:07:13 +08:00
hashtable.h
idr.h
init.h
instrument.h
ipcc.h
irq.h	sched/spin_lock: rename raw_spin_lock to spin_lock_notrace	2025-02-13 20:48:15 +08:00
kmalloc.h
kthread.h
lin.h
lirc.h
list.h
macro.h
memoryregion.h
mmcsd.h
module.h	libc/elf: rename modlib to libelf	2025-04-11 09:43:22 +08:00
mqueue.h
mutex.h	sched/mutex: add ticked lock version for mutex/rmutex	2025-04-03 20:13:55 +08:00
notifier.h
nuttx.h	macro/align: Fix ALIGN_UP and ALIGN_DOWN	2025-01-11 12:13:10 +08:00
page.h
panic_notifier.h
pgalloc.h
progmem.h
pthread.h
queue.h
random.h
reboot_notifier.h
rwsem.h
sched.h	binfmt:use crt0 inside of starthook	2025-04-09 23:07:29 +08:00
sched_note.h
scsi.h
sdio.h
sdio_slave.h
semaphore.h	libc/semaphore: Move fast mutex wait/post paths to libc	2025-04-01 20:37:23 +08:00
signal.h
spawn.h
spinlock.h	sched/spin_lock: continue work to rename raw_spin* to spin_*_notrace	2025-02-27 06:11:58 +02:00
spinlock_type.h	fix compile error	2025-01-08 09:28:58 +08:00
streams.h
symtab.h
tee.h
thermal.h	drivers/thermal: Add support for passive trip point	2025-02-16 11:22:41 -03:00
tls.h	sched/gettid: Move thread ID to TLS	2025-04-08 22:53:10 +08:00
trace.h
uorb.h	sensors/mcp9600: Converted MCP9600 legacy driver to UORB driver as per suggestions on PR #15525.	2025-01-21 09:09:43 +08:00
userspace.h
vt100.h
wdog.h	wqueue: improve the robustness of the work	2025-05-07 02:02:10 +08:00
wqueue.h	sched/wqueue: Refactor delayed and periodical workqueue.	2025-05-07 02:02:10 +08:00
zoneinfo.h