Gregory Nutt 2c97a9cfc1 SAMV71 and SAME70 board: In sam_appinit.c, need to include sys/types. hf CONFIG_BOARD_INITIAILZE is not defineed. Noted by Matt Poppe.		2016-02-24 09:43:37 -06:00
..
Makefile	Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE	2016-02-04 12:14:17 -06:00
sam_appinit.c	SAMV71 and SAME70 board: In sam_appinit.c, need to include sys/types. hf CONFIG_BOARD_INITIAILZE is not defineed. Noted by Matt Poppe.	2016-02-24 09:43:37 -06:00
sam_at24config.c	Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming	2016-02-02 12:25:14 -06:00
sam_autoleds.c	SAME70-Xplained: Has only a single LED and a single push button	2015-11-18 16:45:29 -06:00
sam_boot.c	Fix some SPI initialize function name changes that were missed with global SPI name changes	2016-02-23 07:37:36 -06:00
sam_bringup.c	I2C Tool: Now that the I2C tool uses a character driver, the I2C character drivers must be initialized in board bring-up logic	2016-02-02 14:22:54 -06:00
sam_buttons.c	Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()	2016-02-13 12:37:46 -06:00
sam_ethernet.c	Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()	2016-02-13 12:37:46 -06:00
sam_hsmci.c	configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional	2015-11-30 16:05:32 -06:00
sam_mcan.c	Add basic support for the SAME70-Xplained board	2015-11-18 13:54:57 -06:00
sam_sdram.c	Add basic support for the SAME70-Xplained board	2015-11-18 13:54:57 -06:00
sam_spi.c	For SAM MCUs, rename up_spiinitialize to sam_spibus_initialize	2016-01-26 13:03:12 -06:00
sam_usbdev.c	Add basic support for the SAME70-Xplained board	2015-11-18 13:54:57 -06:00
sam_userleds.c	SAME70-Xplained: Has only a single LED and a single push button	2015-11-18 16:45:29 -06:00
same70-xplained.h	Fix some SPI initialize function name changes that were missed with global SPI name changes	2016-02-23 07:37:36 -06:00