mirror of
https://github.com/apache/nuttx.git
synced 2026-08-01 20:28:58 +00:00
3dbd62e256
Bring up the last two RTL8721F feature blocks and wire them into the nsh board configuration: - littlefs on the on-chip flash MTD region (P2). - WHC/INIC WiFi with the on-chip IPC control plane, NuttX net stack, DHCP client and the wapi command tool (P3). Two porting fixes were required for the WiFi control plane: - ameba_ipc.c: the AP IPC device base (IPCAP_DEV) was carried over verbatim from the RTL8720F template (0x40804000). On this SoC IPC0 lives at 0x40815000; using the wrong base makes ipc_table_init() program the RX-full mask in the wrong register block, so the NP->AP interrupt never fires and WiFi bring-up hangs waiting for the device to answer. Point IPCAP_DEV at the correct 0x40815000 base. - ameba_board.mk: the EVB silicon is B-cut, so link against the ameba_rom_symbol_bcut*.ld ROM symbol tables (the A-cut tables resolve the WiFi ROM helpers to the wrong addresses and fault at run time). Validated on hardware: NSH comes up, wapi scan lists real APs, a WPA2 connect succeeds, the DHCP client obtains a lease and ICMP to the public internet round-trips. The board defconfig keeps SSID/passphrase as placeholders; real credentials are supplied at run time via the wapi commands. Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn> |
||
|---|---|---|
| .. | ||
| arm | ||
| arm64 | ||
| avr | ||
| ceva | ||
| dummy | ||
| hc | ||
| mips | ||
| misoc | ||
| or1k | ||
| renesas | ||
| risc-v | ||
| sim | ||
| sparc | ||
| tricore | ||
| x86 | ||
| x86_64 | ||
| xtensa | ||
| z16 | ||
| z80 | ||
| CMakeLists.txt | ||
| Kconfig | ||