Gregory Nutt 0d203fd535 drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.		2019-04-24 12:11:40 -06:00
..
cdcacm.c	drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.	2019-04-24 12:11:40 -06:00
cdcacm.h
cdcacm_desc.c
cdcecm.c
cdcecm.h
composite.c	drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get descriptor" message of type "standard" with a recipient of type "interface". Since the composite driver would only pass messages to the child interfaces when a message was not "standard", this message was not handled. I changed the condition so that the composite driver checks not only if this is a "standard" message but if it is also directed to the device. Otherwise, the handling is delegated to the children of the composite device.	2019-03-26 21:54:01 -06:00
composite.h
composite_desc.c
dfu.c
Kconfig	arch/arm/src/stm32f7: USB High speed for STM32F7 series	2019-04-07 19:05:06 -06:00
Make.defs
pl2303.c
rndis.c
rndis_std.h
usbdev_strings.c
usbdev_trace.c
usbdev_trprintf.c
usbmsc.c
usbmsc.h
usbmsc_desc.c
usbmsc_scsi.c