mirror of
https://github.com/apache/nuttx.git
synced 2026-09-14 22:50:25 +00:00
18d2ae253c
Wire the shared common UART driver (arch/arm/src/common/ameba/ameba_uart.c) into RTL8720F. Add an ameba_uart_chip.h supplying the per-chip UART parameters: two general-purpose controllers (UART0/UART1), their non-secure register bases (0x401C3000 / 0x401C4000 -- the fwlib UART_DEV_TABLE points at the non-secure alias), NVIC vectors, APBPeriph function/clock masks and the crossbar TX/RX pad-mux function codes. The fwlib ROM UART routines index data tables (UART_DEV_TABLE, APBPeriph_UARTx) that live in fwlib ram_common/ameba_uart.c, so that source is compiled in when CONFIG_AMEBA_UART is set. Wire CONFIG_AMEBA_UART into Make.defs/CMakeLists/ameba_board.mk, add the board port table (UART0 at /dev/ttyS1, PA22 TX / PA23 RX, 115200 8N1) with bringup registration, a uart config and board documentation. Hardware-verified on rtl8720f_evb: serialrx/serialblaster over a PA22-to-PA23 TX/RX loopback transferred all 2600 bytes intact. Assisted-by: Claude <noreply@anthropic.com> Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn> |
||
|---|---|---|
| .. | ||
| arm | ||
| arm64 | ||
| avr | ||
| ceva | ||
| hc | ||
| mips | ||
| misco | ||
| or1k | ||
| renesas | ||
| risc-v | ||
| sim | ||
| sparc | ||
| tricore | ||
| x86 | ||
| x86_64 | ||
| xtensa | ||
| z16 | ||
| z80 | ||
| index.rst | ||