07fd8cc936
Add a NuttX ADC lower-half for the Ameba SoC family, wired for the amebadplus/pke8721daf as /dev/adc0. The driver uses the fwlib ROM API and drives on-demand polled conversions via ADC_ReceiveBuf with the hardware auto channel-switch FIFO, because amebadplus disables the ADC software-trigger path. Per-chip wiring (channel count, pinmux function id, APB clock bits, optional aux clock) lives in a chip header so a new IC only supplies its own values without touching the shared driver. Reports raw conversion codes per the NuttX convention (12-bit effective, 0..~3876 for 0..3.3V), consistent with the STM32/i.MXRT/ Tiva ADC drivers. Verified on hardware: 0V->121, 3.3V->3876 on CH0(PB19) while CH1(PB18) held steady, confirming sampling, full-scale and multi-channel switch-list isolation. Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn> Assisted-by: Claude <noreply@anthropic.com> |
||
|---|---|---|
| .github | ||
| arch | ||
| audio | ||
| binfmt | ||
| boards | ||
| cmake | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| dummy | ||
| fs | ||
| graphics | ||
| include | ||
| libs | ||
| mm | ||
| net | ||
| openamp | ||
| pass1 | ||
| sched | ||
| syscall | ||
| tools | ||
| video | ||
| wireless | ||
| .asf.yaml | ||
| .codespell-ignore-lines | ||
| .codespellrc | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmessage | ||
| .pre-commit-config.yaml | ||
| .yamllint | ||
| AUTHORS | ||
| CMakeLists.txt | ||
| CONTRIBUTING.md | ||
| INVIOLABLES.md | ||
| Kconfig | ||
| LICENSE | ||
| Makefile | ||
| NOTICE | ||
| README.md | ||
| ReleaseNotes | ||
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller environments, the primary governing standards in NuttX are POSIX and ANSI standards. Additional standard APIs from Unix and other common RTOSs (such as VxWorks) are adopted for functionality not available under these standards, or for functionality that is not appropriate for deeply-embedded environments (such as fork()).
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
Getting Started
First time on NuttX? Read the Getting Started guide! If you don't have a board available, NuttX has its own simulator that you can run on terminal.
Documentation
You can find the current NuttX documentation on the Documentation Page.
Alternatively, you can build the documentation yourself by following the Documentation Build Instructions.
The old NuttX documentation is still available in the Apache wiki.
Supported Boards
NuttX supports a wide variety of platforms. See the full list on the Supported Platforms page.
Contributing
If you wish to contribute to the NuttX project, read the Contributing guidelines for information on Git usage, coding standard, workflow and the NuttX principles.
License
The code in this repository is under either the Apache 2 license, or a license compatible with the Apache 2 license. See the License Page for more information.