nuttx/arch/arm/include
Alin Jerpelea 077ef70b0c cxd56xx improvements (#48)
* arch: cxd56xx: Add size limitation for I2C SCU xfer

This is a fw restriction, unroll loop because it can be transfer
up to 16 bytes.

* arch: cxd56xx: Fix lack of leave_critical_section

add the missing leave_critical_section

* arch: cxd56xx: Remove unnecessary file

this header is duplicate and we can remove it

* arch: cxd56xx: Cosmetic change

remove space after function

* arch: cxd56xx: update topreg registers

the topreg registers are updated to match the cxd5602 HW

* arch: cxd56xx: Add voltage setting for low battery notification

Add voltage setting for low battery notification

* arch: cxd56xx: Improve perfomance of SD card

Improve a problem that the clock of SD Host Controller is lower than the
expected value in SDR25 transfer mode.

* arch: cxd56xx: Cosmetic changes

cleanup to comply with coding standard

* boards: cxd56xx: Cosmetic changes

updates to comply with coding standard

* boards: cxd56xx: Fix SD card cannot mount issue

SD card cannot mount when connecting and disconnecting three times
or more due to wrong state of parameter 'initialized'.

This change enables to skip swtching initialized state when mount
failed.
2020-01-07 11:21:58 -03:00
..
a1x
am335x
arm Squashed commit of the following: 2019-04-29 14:52:05 -06:00
armv6-m Squashed commit of the following: 2019-04-29 14:52:05 -06:00
armv7-a Squashed commit of the following: 2019-04-29 14:52:05 -06:00
armv7-m arch/arm/include/armv7-m/syscall.h: ARM EABI specifies that the stack should be aligned by 8 on function calls, inside the function is not required to be aligned by 8. Since these functions call svc, compiler doesn't know that the svc is a function, therefore it does not do any stack management. This change pushes an even number of args to the stack and maintains an 8 byte alignment. I've checked the assembly and it doesn't cause any more overhead that the hand written assembly. 2019-12-16 09:10:08 -06:00
armv7-r Squashed commit of the following: 2019-04-29 14:52:05 -06:00
c5471
cxd56xx cxd56xx improvements (#48) 2020-01-07 11:21:58 -03:00
dm320
efm32
imx1
imx6
imxrt Merged imxrt1020 into master 2019-04-30 16:08:46 -06:00
kinetis
kl
lc823450
lpc17xx_40xx Merged in jjlange/nuttx/lpc40xx (pull request #946) 2019-07-11 16:50:00 +00:00
lpc31xx
lpc43xx
lpc54xx symtab/Makefile: When system wide locale is set (i.e. en_US.UTF-8) then 'read' is ordered after 'readdir' even if separator is set to quotation mark and key set to 2. When C locale is used result is correct. 2019-08-14 11:02:30 -06:00
lpc214x
lpc2378
max326xx
moxart
nrf52 Merged in raiden00/nuttx_nrf52 (pull request #1098) 2019-12-19 15:40:56 +00:00
nuc1xx
s32k1xx arch/arm/src/s32k1xx: This commit brings in the LPSPI and LPI2C peripheral drivers from the i.MXRT which used the identical IP. 2019-08-21 11:18:40 -06:00
sam34
sama5
samd2l2 arch/arm/include/samd2l2/sam_adc.h: I was wrong... this header file does belong in the samd2l2 include directory. It contains IOCTL definitions that are needed by applications. Usage of a chip-specific header file is, however, not really a good portable design because it requires that the application know that it is running on a specific chip. But still, if we are going to do that, the include directory is where the header file belongs. My apologies for the bad judgement. 2019-12-16 03:53:05 -06:00
samd5e5 Author: Gregory Nutt <gnutt@nuttx.org> 2020-01-02 12:35:45 -06:00
samv7
stm32
stm32f0l0g0 Add support for STM32G070xx 2019-09-17 11:10:38 -06:00
stm32f7 Fixed a compilation error, with irq debugging for stm32f7 and stm32h7 archs. 2020-01-05 21:24:16 +00:00
stm32h7 Squashed commit of the following: 2020-01-02 12:17:16 -03:00
stm32l4 Fixed STM32L4_NUSART for STM32L433XX. (#9) 2019-12-31 07:47:06 -06:00
str71x
tiva arch/arm/include/tiva/tm4c_irq.h: Fix wrong IRQ vector number. 2019-11-06 20:43:51 -06:00
tms570
xmc4
.gitignore
arch.h
elf.h arch/arm/include/syscall.h: Add missing inclusion of arch/armv7-r/syscall.h for CortexR. 2019-01-26 07:43:31 -06:00
inttypes.h
irq.h arch/arm: Add the initial cortex-a7 archtiecture support 2019-03-19 11:51:29 -06:00
limits.h
setjmp.h arch/arm/include/setjmp.h: Add prototypes for setjmp/longjmp functions. 2019-11-17 08:48:17 -06:00
spinlock.h Fix some typos 2019-09-17 10:46:23 -06:00
stdarg.h
syscall.h arch/arm: Add the initial cortex-a7 archtiecture support 2019-03-19 11:51:29 -06:00
tls.h
types.h