nuttx/drivers/lcd/Make.defs
vrmay23 96a49bc7f7 drivers/lcd: Add ST7796 TFT LCD framebuffer driver
Add support for ST7796 TFT LCD controller (320x480). The driver
implements the NuttX framebuffer interface for SPI-connected displays.

Features:
- SPI interface with CONFIG_SPI_CMDDATA for D/C pin control;
- RGB565 (16-bit) and RGB666 (18-bit) color formats;
- Runtime rotation support (0, 90, 180, 270 degrees) via MADCTL;
- Board-provided configuration via st7796_config_s structure;
- Partial screen update via updatearea for efficient rendering;
- Persistent swap buffer to avoid per-frame allocations;
- Proper ST7796S initialization sequence with documented timing;

The driver uses a board-provided configuration structure allowing
flexible setup of resolution, SPI frequency, color depth, and
initial MADCTL value without requiring Kconfig options in the
generic driver.

Architecture changes in this revision as per request:

- Moved internal register commands to .c file (private)
- Moved MADCTL bit definitions to .c file (private)
- Moved struct st7796_cmd_s to .c file (private)
- Converted MADCTL orientation macros to absolute values
- Moved CONFIG_SPI_CMDDATA error check to beginning of file
- Removed duplicated CONFIG_SPI_CMDDATA guards
- Public header contains only board configuration API
- Changed the Kconfig auto-select FB from 'select' to 'depends on'

Tested with LVGL graphics library on STM32H753ZI board (my own port).

Signed-off-by: Vinicius May <vmay.sweden@gmail.com>
2026-02-19 09:19:13 -03:00

197 lines
3.9 KiB
Text

############################################################################
# drivers/lcd/Make.defs
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
ifeq ($(CONFIG_LCD),y)
# Support for the generic LCD framebuffer front-end
ifeq ($(CONFIG_LCD_FRAMEBUFFER),y)
CSRCS += lcd_framebuffer.c
endif
ifeq ($(CONFIG_LCD_DEV),y)
CSRCS += lcd_dev.c
endif
# Include support for Graphics LCD drivers
ifeq ($(CONFIG_LCD_FT80X),y)
CSRCS += ft80x.c
ifeq ($(CONFIG_LCD_FT80X_SPI),y)
CSRCS += ft80x_spi.c
else ifeq ($(CONFIG_LCD_FT80X_I2C),y)
CSRCS += ft80x_i2c.c
endif
endif
ifeq ($(CONFIG_LCD_LPM013M091A),y)
CSRCS += lpm013m091a.c
endif
ifeq ($(CONFIG_LCD_APA102),y)
CSRCS += apa102.c
endif
ifeq ($(CONFIG_LCD_P14201),y)
CSRCS += p14201.c
endif
ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
CSRCS += ug-2864ambag01.c
endif
ifeq ($(CONFIG_LCD_UG9664HSWAG01),y)
CSRCS += ug-9664hswag01.c
endif
ifeq ($(CONFIG_LCD_SSD1306),y)
CSRCS += ssd1306_base.c
endif
ifeq ($(CONFIG_LCD_SSD1306_SPI),y)
CSRCS += ssd1306_spi.c
endif
ifeq ($(CONFIG_LCD_SSD1306_I2C),y)
CSRCS += ssd1306_i2c.c
endif
ifeq ($(CONFIG_LCD_SSD1289),y)
CSRCS += ssd1289.c
endif
ifeq ($(CONFIG_LCD_SSD1680),y)
CSRCS += ssd1680.c
endif
ifeq ($(CONFIG_LCD_SSD1351),y)
CSRCS += ssd1351.c
endif
ifeq ($(CONFIG_LCD_MIO283QT2),y)
CSRCS += mio283qt2.c
endif
ifeq ($(CONFIG_LCD_MAX7219),y)
CSRCS += max7219.c
endif
ifeq ($(CONFIG_LCD_MIO283QT9A),y)
CSRCS += mio283qt9a.c
endif
ifeq ($(CONFIG_LCD_PCD8544),y)
CSRCS += pcd8544.c
endif
ifeq ($(CONFIG_LCD_ST7565),y)
CSRCS += st7565.c
endif
ifeq ($(CONFIG_LCD_ST7567),y)
CSRCS += st7567.c
endif
ifeq ($(CONFIG_LCD_SHARP_MEMLCD),y)
CSRCS += memlcd.c
endif
ifeq ($(CONFIG_LCD_ILI9225),y)
CSRCS += ili9225.c
endif
ifeq ($(CONFIG_LCD_ILI9340),y)
CSRCS += ili9340.c
endif
ifeq ($(CONFIG_LCD_ILI9341),y)
CSRCS += ili9341.c
endif
ifeq ($(CONFIG_LCD_LCDDRV_SPIIF),y)
CSRCS += lcddrv_spiif.c
endif
ifeq ($(CONFIG_LCD_RA8875),y)
CSRCS += ra8875.c
endif
ifeq ($(CONFIG_LCD_ST7735),y)
CSRCS += st7735.c
endif
ifeq ($(CONFIG_LCD_ST7789),y)
CSRCS += st7789.c
endif
ifeq ($(CONFIG_LCD_ST7796),y)
CSRCS += st7796.c
endif
ifeq ($(CONFIG_LCD_GC9A01),y)
CSRCS += gc9a01.c
endif
ifeq ($(CONFIG_LCD_JD9851),y)
CSRCS += jd9851.c
endif
endif # CONFIG_LCD
ifeq ($(CONFIG_SLCD),y)
# Include support for Alphanumeric/Segment LCD drivers
ifeq ($(CONFIG_LCD_BACKPACK),y)
CSRCS += pcf8574_lcd_backpack.c
endif
ifeq ($(CONFIG_LCD_ST7032),y)
CSRCS += st7032.c
endif
ifeq ($(CONFIG_LCD_HT16K33),y)
CSRCS += ht16k33_14seg.c
endif
endif # CONFIG_SLCD
# Other LCD-related devices
ifeq ($(CONFIG_LCD_TDA19988),y)
CSRCS += tda19988.c
endif
# Include LCD driver build support (the nested if-then-else implements an OR)
ifeq ($(CONFIG_LCD),y)
DEPPATH += --dep-path lcd
VPATH += :lcd
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)drivers$(DELIM)lcd
else ifeq ($(CONFIG_SLCD),y)
DEPPATH += --dep-path lcd
VPATH += :lcd
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)drivers$(DELIM)lcd
else ifeq ($(CONFIG_LCD_OTHER),y)
DEPPATH += --dep-path lcd
VPATH += :lcd
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)drivers$(DELIM)lcd
endif