Add documentation for the RC/LIRC character driver subsystem covering
device registration, the LIRC interface, and usage from user space.
Remove placeholder empty files under drivers/rmt that were left over
from the rmtchar era and are no longer referenced.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Add USB Video Class 1.1 gadget driver supporting Bulk transport
with uncompressed YUY2 video streaming. Resolution and frame
interval are negotiated dynamically via PROBE/COMMIT control.
- uvc.h: protocol constants, streaming control struct, public API
- uvc.c: class driver with PROBE/COMMIT, bulk EP, /dev/uvc0 chardev
- Kconfig/Make.defs: USBUVC config and build rules
- boardctl.c: BOARDIOC_USBDEV_UVC standalone init path
Hardened against host disconnect:
- Removed nxmutex_lock from USB interrupt context paths
- Added 30s semaphore timeout in uvc_write with EP_CANCEL fallback
- Drain stale wrsem counts in VS_COMMIT before new stream
- Guard uvc_streaming_stop() against double EP_CANCEL race
- Handle EP_SUBMIT returning -ESHUTDOWN gracefully
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Fix 269 occurrences of duplicate "the" word typo found in 209 files
across source code, header files, and configuration.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This update enhances the SDIO documentation by including a reference to the card initialization flowchart in the MMC/SD physical layer specification. This addition aims to provide implementers with a clearer understanding of the complete card initialization and command sequence.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
This update clarifies the call-flow for the SDIO lower-half driver implementation by providing a simplified example of the interaction between the MMCSD upper-half and the lower-half. It details the command sequence for handling R2 responses, improving the understanding of the expected behavior during card identification and initialization.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
This update adds a reference to the SDIO Driver Documentation for implementers of SDIO lower-half drivers, emphasizing the importance of understanding R2/CSD response handling and the correct implementation of the lower-half interface.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
This update expands the documentation for implementing an SDIO lower-half driver, detailing the required interface, call-flow, and handling of the R2 response format. It emphasizes the importance of byte-shifting when the CRC is stripped by the hardware, providing reference implementations for clarity.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
Add a new section documenting the TIOCSERGSTRUCT debug ioctl and CONFIG_SERIAL_TIOCSERGSTRUCT Kconfig option. The section covers enabling the feature, how the ioctl copies driver-internal state to user space, example usage with the 16550 UART driver, and a warning about the non-stable nature of exposed structures.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
This commit updates the syslog.rst documentation to:
1. Add a new "Overview" section with the syslog-overview.png diagram
2. Introduce a comprehensive "Syslog Configuration Options" chapter
3. Document the CONFIG_SYSLOG_TIMESTAMP_MS option (newly added in driver code)
- Clarify its dependency on CONFIG_SYSLOG_TIMESTAMP
- Explain its function: use millisecond (ms) precision instead of default microsecond (µs)
4. Group all syslog Kconfig options by functional role (debug level, formatting, buffer, etc.)
- Basic Debug Log Level Configuration
- Message Formatting Configuration (timestamp/metadata/visual)
- (Other categories follow the syslog system architecture)
The documentation changes align with the recent driver enhancement:
- drivers/syslog: add millisecond option for syslog timestamp formatting
- Maintain consistency between driver code and documentation
- Make syslog configuration options more discoverable for developers
Signed-off-by: chao an <anchao.archer@bytedance.com>
Add a generic kmatrix lower-half with polling/debounce, STM32 board adapters, Kconfig options, a public API header, and a test example/documentation.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
decouple kbd / keypad.
Fix some comments
add documentation
fix rule issues
Update CMakeLists.txt
update documentation.
improve documentation
Add comprehensive documentation for the Vhost framework, which serves
as the VirtIO backend implementation in NuttX for cross-core communication.
The documentation includes:
- Overview and comparison with Linux Vhost and QEMU VirtIO Device
- Three-layer architecture (Service, Framework, Transport)
- Driver/Device registration and matching workflow
- Source code directory structure
- Complete API reference (data structures, core APIs, macro APIs)
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add documentation for the RPMsg dump command, which is a diagnostic
tool for dumping RPMsg debugging information. The document covers:
- Command usage and syntax
- Output description including CPU info, endpoint list, virtqueue
dump, and buffer states
- Common debugging use cases such as TX buffer timeout issues,
communication failures, and buffer leak detection
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add comprehensive documentation for the RPMsg Ping diagnostic tool,
which is used for testing inter-processor communication and measuring
latency/throughput metrics.
The documentation includes:
- Overview and use cases
- Configuration instructions
- Command syntax and parameters
- Usage examples with sample output
- Architecture workflow diagram
- Best practices for latency and throughput testing
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add documentation for CONFIG_TIMER_WDOG, a software-based timer
implementation using the NuttX wdog subsystem.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
Add documentation for RPMsg Port UART, a transport layer that enables
RPMsg communication between SoCs via UART when shared memory is not
available.
The documentation covers:
- Hardware requirements (UART with flow control)
- Software architecture
- Escape coding protocol for command/data separation
- Connection establishment protocol
- Data frame format
- Low power support with ping-pong wake mechanism
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add comprehensive documentation for the RPMsg Port abstract transport
layer, which supports cross-SoC communication via physical backends
like SPI and UART.
The documentation covers:
- Architecture overview and layer diagram
- Buffer management with TX/RX free and ready lists
- Buffer layout with header reservation
- Data transmission and reception flow
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add a concise RPMsg documentation covering:
- Overview of RPMsg framework for AMP systems
- Application scenarios (heterogeneous/homogeneous AMP)
- Layered architecture (Services/Framework/Transport/Physical)
- Message encapsulation process
- Workflow: channel establishment, sending and receiving
- Key design considerations (FIFO order, callback blocking)
- Transport layer comparison
All diagrams use ASCII art for portability.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
This commit fixes a typo in the capture.h header file. This is a
breaking change, but the fix is trivial (replace macro with new one).
Signed-off-by: Côme VINCENT <44554692+comejv@users.noreply.github.com>
Add basic timer operations to the kernel, including registration,
start/stop, and callback handling. This provides a consistent timer
interface for use by kernel components and drivers.
Signed-off-by: zhaohaiyang1 <zhaohaiyang1@xiaomi.com>
Introduce a single configuration option to provide strict transmit
priority ordering based on CAN ID.
The intention is to expose the user-visible behavior (strict TX
priority ordering) rather than the underlying implementation details.
Strict priority ordering is only meaningful when hardware transmit
buffer cancellation is available, so splitting this functionality into
separate configuration options was misleading and could result in
partially effective or incorrect configurations.
Signed-off-by: zhaohaiyang1 <zhaohaiyang1@xiaomi.com>
These documentation updates correspond to commits:
- drivers/capture: add signal notification support for edge capture events
- drivers/capture: add fake capture driver for testing and development
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This documentation helps users understand when and how to use IO expander
pins for implementing additional I2C buses in their applications.
Related commit: 06099d492e (drivers/i2c: Add IO expander-based I2C bit-bang)
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This moves mtd.rst from special/ directory to its own special/mtd
subdirectory and adds pages for supported devices (NOR/NAND flashes and
EEPROMS) with some basic configuration and initialization description.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This patch adds comprehensive documentation for the PTP (Precision Time
Protocol) clock driver framework in NuttX.
The documentation covers:
1. Overview and Architecture:
- IEEE 1588 PTP clock framework introduction
- Upper-half and lower-half driver architecture
- Integration with POSIX clock APIs
2. Configuration Options:
- CONFIG_PTP_CLOCK: Main framework configuration
- CONFIG_PTP_CLOCK_DUMMY: Dummy driver for testing
- CONFIG_CLOCK_ADJTIME: clock_adjtime() system call support
3. Device Interface:
- Character device interface (/dev/ptpN)
- IOCTL commands: PTP_CLOCK_GETTIME, PTP_CLOCK_SETTIME,
PTP_CLOCK_GETRES, PTP_CLOCK_ADJTIME, PTP_CLOCK_GETCAPS,
PTP_SYS_OFFSET, PTP_SYS_OFFSET_PRECISE
4. POSIX Clock API (CLOCKFD):
- Using CLOCKFD() macro to access PTP clocks
- clock_gettime(), clock_settime(), clock_getres() examples
- clock_adjtime() with various adjustment modes
- ADJ_OFFSET, ADJ_FREQUENCY, ADJ_SETOFFSET support
5. Dummy PTP Clock Driver:
- Software-based implementation for testing
- Features and initialization details
6. Example Usage:
- Basic time operations
- Frequency adjustment examples
- Time offset adjustment examples
7. Implementing Lower-Half Drivers:
- Step-by-step guide for hardware driver implementation
- Required operations and structures
- Registration process
8. Integration with PTP Daemons:
- ptp4l, timemaster, ptpd compatibility
- Standard POSIX clock API usage
9. Performance Considerations:
- Hardware timestamping requirements
- Cross-timestamping support
- Frequency adjustment resolution
10. Debugging:
- Debug configuration options
- Debug output examples
The documentation is added to:
- Documentation/components/drivers/special/ptp.rst (new file)
- Documentation/components/drivers/special/index.rst (updated)
This provides developers with complete reference material for using
and implementing PTP clock drivers in NuttX.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Add handling for GPIOC_SETDEBOUNCE to set GPIO pin debounce duration.
Add handling for GPIOC_SETMASK to enable/disable GPIO interrupt mask.
Signed-off-by: chenzihan1 <chenzihan1@xiaomi.com>
In order to reduce code duplication, use the eeprom/spi_xx25xx
driver within mtd/at25ee.
The eeprom/xxx.h includes have been merged into eeprom/eeprom.h, to
provide a common include file like mtd/mtd.h.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Inspired by Linux's way, we also create VLAN devices for managing VLAN,
which will become interfaces like `eth0.58`.
QinQ is also supported, we can create VLAN devices above another VLAN
devices, like `eth0.100.101` (or even `eth0.1.2.3.4`, also supported on
Linux).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add support for the page erase (PE), sector erase (SE) and chip erase
(CE) dedicated commands on supported devices.
They can be triggered using the corresponding IOCTL commands
EEPIOC_PAGEERASE, EEPIOC_SECTORERASE and
EEPIOC_CHIPERASE.
On unsupported devices, this is equivalent to writing a full page,
sector, or the entire EEPROM to 0xFF.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Add complete driver support for the QST QMI8658 6-axis IMU sensor featuring
3-axis accelerometer and 3-axis gyroscope with I2C interface and uORB
integration.
Key features implemented:
* Full I2C communication with configurable frequency (default 400kHz)
* Multiple accelerometer ranges (±2g, ±4g, ±8g, ±16g) and ODR settings
* Multiple gyroscope ranges (±16 to ±1024 dps) with high ODR support
* Low-pass filter configuration for both sensors
* Temperature sensing with 16-bit resolution
* Self-test capability for both accelerometer and gyroscope
* Calibration-on-demand support with offset registers
* FIFO buffer management (framework ready)
* Interrupt-driven and polling mode support
* Complete uORB integration with sensor_accel and sensor_gyro topics
Driver components added:
* Core driver implementation (qmi8658_uorb.c) with register operations
* Header file with register definitions and scale factors (qmi8658.h)
* Kconfig options for driver configuration and polling mode
* Build system integration (CMakeLists.txt, Make.defs)
* Comprehensive documentation with API reference and usage examples
The driver follows NuttX sensor framework conventions and provides
robust error handling, mutex protection, and comprehensive debugging
support through CONFIG_DEBUG_SENSORS.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add EEPIOC_SETSPEED ioctl acting like the MTDIOC_SETSPEED ioctl. The
default frequency is settable in the Kconfig.
Add xx25xx SPI delay control configurations.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This adds ability for read and write operations to work with messages
aligned to configured number of bytes. This has few different use
cases.
The alignment is specified as unsigned integer and can be changed with
ioctl command CANIOC_SET_MSGALIGN. The current value can be queried by
CANIOC_GET_MSGALIGN command.
The default value for the message alignment is 1. This will provide
behavior consistent with current one. Thus messages are placed to the
buffer right after data of the previous one. The same applies for
writes.
The special alignment value 0 disables read and write of multiple frames. Thus
read will always return at most one message and write will always write
only one message even if larger buffer size is provided.
Another use case is if message alignment is set to exactly message
representation size (`sizeof(struct can_msg_s)`). This allows writing
and reading arrays of messages.
Other values provide even more advanced and specialized use cases, such
as optimizations if architecture has to emulate some non-aligned
accesses, there alignment of for example 4 bytes could provide
performance boost.
The original motivation behind this is was compatibility with socket
CAN. It is easier to port applications to NuttX's CAN driver if only one
frame is provided at the time. This solution was suggested by Pavel Pisa
<pisa@fel.cvut.cz> as a more versatile variant of plain boolean
disabling the multiple frame retrieval.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
Add documentation describing the purpose and behavior of early_syslog(),
which provides a minimal logging facility available during early system
initialization or system down.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Add documentation for changes made in #16809.
Add an example defconfig for a nsh build with the capture example.
Replace the STM32H7_CAP option with just CAPTURE as the guard for the
lower half driver.
Signed-off-by: Côme VINCENT <44554692+comejv@users.noreply.github.com>
