Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Gregory Nutt
e5f27f5865
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
2015-11-25 12:51:45 -06:00
Ken Pettit
c0b9dcf8a9
fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:26:26 -06:00
Gregory Nutt
cd7c6705a8
mm.h: Use UINT32_MAX vs. SIZE_MAX in definition of MMSIZE_MAX
2015-11-25 08:11:32 -06:00
Gregory Nutt
6230e6e199
size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h
2015-11-23 12:03:36 -06:00
Gregory Nutt
25ab59bf80
stddef.h: Use a round-about cast in the definition of offsetof() to avoid warnings on machines with 64 bit addresses and when size_t is less than 64-bits.
2015-11-23 07:11:05 -06:00
Ken Pettit
375419eaf2
mksmartfs: Remove fs/smartfs/fs_mksmartfs.c and related headers. This has been moved to apps/fsutils/mksmartfs. From Ken Petit
2015-11-23 07:05:09 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144
Add support for freopen()
2015-11-22 08:39:17 -06:00
Gregory Nutt
38c9d42e21
drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC
2015-11-20 17:36:10 -06:00
Gregory Nutt
db2fe45666
Update some comments
2015-11-20 09:55:18 -06:00
Gregory Nutt
4b29bcee7f
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:52 -06:00
Gregory Nutt
b60c2519d7
arch.h: Update some comments and conditional compilation
2015-11-20 07:13:16 -06:00
Gregory Nutt
c34b5108a7
RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver
2015-11-19 14:54:30 -06:00
Gregory Nutt
678eb7b78b
Merged in paulpatience/nuttx/stdio (pull request #37 )
...
stdio: Define BUFSIZ
2015-11-18 14:46:03 -06:00
Paul A. Patience
c0a1d8e960
stdio: Define BUFSIZ
2015-11-18 15:09:43 -05:00
Gregory Nutt
f699072507
Merged in paulpatience/nuttx/stdlib (pull request #36 )
...
stdlib: Fix forgotten FARs
2015-11-18 14:01:17 -06:00
Paul A. Patience
bfc95c641f
stdlib: Fix forgotten FARs
2015-11-18 14:22:43 -05:00
Paul A. Patience
706218d18f
atoi(): Cast return value to int
2015-11-18 14:12:29 -05:00
Gregory Nutt
622ea95ab1
drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC
2015-11-18 08:43:19 -06:00
Gregory Nutt
4579f0c1fc
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:53 -06:00
Gregory Nutt
25c4ff8285
Update some comments
2015-11-17 16:29:34 -06:00
Gregory Nutt
c0a701b779
Merged in wail007/nuttx (pull request #33 )
...
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:23:03 -06:00
Wail Khemir
09b9d6ba1f
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:39:21 -05:00
Gregory Nutt
45530a77d4
Add support for DS3231 I2C RTC. Untested on initial commit.
2015-11-17 14:07:55 -06:00
Gregory Nutt
e61d51dab3
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
2015-11-17 08:39:06 -06:00
Gregory Nutt
f5722bc6dd
Merged in slorquet/nuttx/pca9555 (pull request #32 )
...
Pca9555 interrupt support.
2015-11-17 07:45:33 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Sebastien Lorquet
c7999141e7
Merge branch 'master' into pca9555
2015-11-17 14:12:03 +01:00
Sebastien Lorquet
826aadbce8
Include support for PCA9555 interrupt driven IO changes detection.
...
Currently using a signal, and a single notified task.
signal handling support moved to generic IO expander header (not pca specific)
2015-11-17 14:09:43 +01:00
Gregory Nutt
580529ba23
crypto/aes.c: Make refernce to key const
2015-11-16 14:30:43 -06:00
Gregory Nutt
c955cdccd9
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
2015-11-16 13:31:02 -06:00
Gregory Nutt
815ec07b55
CAN: A minor improvement to can_txready design
2015-11-15 06:36:30 -06:00
Gregory Nutt
d6eb48d1ab
Update comments
2015-11-14 14:00:39 -06:00
Gregory Nutt
81ab270a96
CAN driver: Removing call to can_xmit() from can_txready() in a previous commit was a mistake. This commit restores the call to can_xmit(), but does the call in a safer environment on the work thread.
2015-11-14 10:33:02 -06:00
Sebastien Lorquet
8242600e5e
WIP for pca9555 irq
2015-11-13 16:28:46 +01:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Max Neklyudov
d54a39832a
Implement high level DMA infrastructure for serial devices
2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
5eaf368d16
progmem.h: Cosmetic updates to comments
2015-11-12 12:30:15 -06:00
Gregory Nutt
7fe6200b0f
progmem.h: Clean-up a few comments
2015-11-11 14:30:06 -06:00
Gregory Nutt
e62673241d
Eliminate some useless comments
2015-11-11 11:02:52 -06:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
95562f8a86
CAN driver: More improved comments
2015-11-08 07:43:57 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Paul A. Patience
4c70fc181a
ADC: Fix forgotten FARs
2015-11-05 10:27:47 -05:00
Gregory Nutt
c6fc285277
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
2015-11-03 10:52:58 -06:00
Gregory Nutt
51d29d3c97
Merged in paulpatience/nuttx/pwm (pull request #29 )
...
PWM: Add support for multiple output channels per timer
2015-11-01 16:40:06 -06:00
Paul A. Patience
e8c2466c1c
PWM: Add support for multiple output channels per timer
2015-11-01 17:15:12 -05:00
