This patch adds definitions for listed chips. No other changes are needed
as the chips are similar to the previously supported AVR128DA28 and all
that is needed is some definitions for extra peripherals.
AVR DA/DB family chips have single interrupt vector for all changes
on an I/O port. This poses problem when multiple drivers want to claim
the same interrupt (might happen for example with button and discrete
joystick drivers using pins on the same port.)
The I/O multiplexer solves it by providing interface similar
to irq_attach. However, it allows registration of multiple handlers
for the same interrupt vector with additional information recording
which pins should be serviced by each handler.
Only handler for pins that triggered the interrupt is then called.
Initial support adds chip specific files like Kconfig, flags for the compiler,
and basic functionality like system timer. Some files are stubs derived
from corresponding ATmega files but without the functionality they are
supposed to add (to be done in later patches)
Part of the work is altered copies of corresponding files for ATMega MCUs.
Initially supported is AVR128DA28.
This patch marks host GCC toolchain option with ARCH_TOOLCHAIN_GCC,
enabling various other settings depending on it. One of the enabled
settings is DEBUG_OPT_UNUSED_SECTIONS.
This patch also adjusts compiler and linker flags based on the value
of DEBUG_OPT_UNUSED_SECTIONS so unused sections are removed
The code used subi instruction to decrement the Y pointer but this
instruction only affects a byte, not a word. Fixed it by using
pre-decrement in the LD instruction instead.
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Inline & inline_function both used make confuze, let's modify all inline
in irq.h to inline_function, also clear the always_inline_funcion
declaration.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
reason:
When entering an exception or interrupt, there are two sets of registers:
one is the "running regs", which we need to save,
and the other is the "ready to running regs", which we may soon use.
For consistency in logic, we can always store the "running regs" in the regs field of g_running_tasks,
otherwise it may lead to errors in the storage location of the "running regs."
When we need to access the "running regs," we should uniformly retrieve them from the regs field of g_running_tasks.
As the next step, we will rename the set_current_regs/up_current_regs functions
for each architecture to more appropriate names, solely for the purpose of identifying interrupts.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Some app with same code runs on different cores in AMP mode,
need the physical core on which the function is called.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
reason:
In the kernel, we are planning to remove all occurrences of up_cpu_pause as one of the steps to
simplify the implementation of critical sections. The goal is to enable spin_lock_irqsave to encapsulate critical sections,
thereby facilitating the replacement of critical sections(big lock) with smaller spin_lock_irqsave(small lock)
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
