This board does not have a calibrated LOOPSPERMSEC value despite needing
one in order for correct operation. This commits sets the value to 0 so
that CI builds may pass, but users who build this board will see a
warning indicate the steps for calibrating a new value.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This board does not have a calibrated LOOPSPERMSEC value despite needing
one in order for correct operation. This commits sets the value to 0 so
that CI builds may pass, but users who build this board will see a
warning indicate the steps for calibrating a new value.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This board does not have a calibrated LOOPSPERMSEC value despite needing
one in order for correct operation. This commits sets the value to 0 so
that CI builds may pass, but users who build this board will see a
warning indicate the steps for calibrating a new value.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This board does not have a calibrated LOOPSPERMSEC value despite needing
one in order for correct operation. This commits sets the value to 0 so
that CI builds may pass, but users who build this board will see a
warning indicate the steps for calibrating a new value.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This board does not have a calibrated LOOPSPERMSEC value despite needing
one in order for correct operation. This commits sets the value to 0 so
that CI builds may pass, but users who build this board will see a
warning indicate the steps for calibrating a new value.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This patch adds support for the user button on nuclo-h743zi2 board
(and nucleo-h753zi2 which is also a MB1364 board design) and enables
button support and example in nucleo-h743zi2:jumbo configuration selector.
Signed-off-by: Peter Barada <peter.barada@gmail.com>
Aligns `CONFIG_INTERPRETER_*` options to `CONFIG_INTERPRETERS_*` to be
consistent with other interpreters.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Aligns `CONFIG_INTERPRETER_*` options to `CONFIG_INTERPRETERS_*` to be
consistent with other interpreters.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Aligns `CONFIG_INTERPRETER_*` options to `CONFIG_INTERPRETERS_*` to be
consistent with other interpreters.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
- Change the board's sd-card speed configuration to just specify the wanted frequency
- Calculate the proper divisors in the driver
- If the sd card frequency exceeds 25 MHz, set the card to high-speed mode
This makes it easier to adjust the operating speed of the sd cards and fixes an error
where cards are being operated in standard mode at over 25MHz speeds. If the speed
is higher than 25MHz, the card needs to be set into high-speed mode.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Intermediate files of make depend like .ddc and .dds may remain
when make is interrupted. Remove them using make distclean.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
Add a generic kmatrix lower-half with polling/debounce, STM32 board adapters, Kconfig options, a public API header, and a test example/documentation.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
decouple kbd / keypad.
Fix some comments
add documentation
fix rule issues
Update CMakeLists.txt
update documentation.
improve documentation
- Add support for the MR-NAVQ95 which is an open-source development
board designed for mobile robotics applications.
- Utilizes the NXP i.MX95 processor M7 core
- Configurations:
'nsh' A minimal configuration that only enables nsh shell
on a UART
'rpmsg' This configuration is similar to nsh but in addition
it offers the Remote Processing Messaging (RPMsg) service to
enable heterogeneous inter-core communication.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
Enabling MPU will fix imx95-evk:rpmsg by making rsc-table and vrings
regions non-cachable. Since the rewrite of RpMsg these regions are not
invalidated anymore.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
With CONFIG_PAGING enabled and the RISC-V SV39 MMU active, the page fault
handler incorrectly tracked page table levels: `ptprev` pointed to the L1
page table while `ptlevel` indicated L2. This inconsistency caused faulty
virtual address resolution.
This commit fixes the traversal logic to ensure consistent level tracking
across all three page table levels (L1–L3), enabling reliable page fault
handling and on-demand paging.
Additional changes:
- Set PGT_L3_SIZE to 2048 to enable mapping up to 8MB of address space.
- Update knsh_paging config to avoid crashes caused by excessive memory
alignment requirements.
- Add knsh64_paging config to verify this commit works as expected.
Signed-off-by: liang.huang <liang.huang@houmo.ai>
Change DRIVERS_VIRTIO and DRIVERS_VHOST from menuconfig to hidden config
options. Each virtio/vhost sub-driver now automatically selects its parent
config, eliminating the need to manually enable DRIVERS_VIRTIO or
DRIVERS_VHOST in defconfig files.
This simplifies board configuration by removing redundant CONFIG_DRIVERS_VIRTIO
entries from affected defconfig files.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add missing else branches to handle spinlock operations when no valid spinlock
pointer is available. This fixes a regression in IRQ save/restore operations
introduced by a previous refactoring of the spinlock control logic.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Refactor heap pointer storage by moving us_heap field from userspace_s
to the nested userspace_data_s structure, enabling future extensibility
of user-space data without modifying the core userspace_s interface across
all board-specific implementations.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The simpleboot format does not require alignment sections to be
inserted as they are added by esptool.py
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Enable CMocka unit testing framework in the simulator crypto configuration.
This requires enabling the following dependencies:
- CONFIG_ALLOW_MIT_COMPONENTS: Allow MIT licensed components
- CONFIG_LIBC_REGEX: Regular expression support needed by CMocka
- CONFIG_TESTING_CMOCKA: CMocka unit testing framework
- CONFIG_TESTING_CRYPTO: Crypto testing support
Signed-off-by: makejian <makejian@xiaomi.com>
Enable CONFIG_SCHED_EVENTS for the sim:rpproxy_uart,rpserver_uart and
qemu-armv7a:rpproxy,rpserver configurations because rpmsg port uart
depends on the SCHED_EVENTS now.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Enable high-resolution timer (hrtimer) using the list
implementation in the CITEST configuration on fvp-armv8r:citest.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
