Replace the spinlock/sched_lock pair in the sched clock module with
spin_lock_irqsave_nopreempt() to improve code clarity and consistency.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Improve nxclock_gettime(), to get the system time excluding
the time that the system is suspended, when the clockid is
CLOCK_MONOTONIC
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Replace direct usage of g_system_ticks with clock_increase_sched_ticks()
and clock_get_sched_ticks()
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
In the current NuttX kernel implementation, there is no function
to represent pure scheduler ticks.
The existing clock_systime_ticks() cannot serve this purpose,
because it keeps increasing even when the scheduler is not running.
This happens since the returned value reflects real hardware time:
as long as the timer or alarm hardware is active,
clock_systime_ticks() will continuously increase.
This patch introduces two new functions that provide access to
scheduler ticks — a counter that only increases when the scheduler
itself is running.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
clock_systime_timespec() always returns 0, so there is no need to
check the return value in the caller code, let us remove the return
value directly.
Signed-off-by: chao an <anchao.archer@bytedance.com>
Many different architectures re-implemented the exact same code for
`up_*delay` because it was originally written as architecture dependent
code. Busy-waiting can be done regardless of architecture, so this
commit moves that duplicated implementation to a common file with weak
definitions so that individual architectures (see tc32) are still able
to override the definition if needed/desired.
Default implementation is not included if ARCH_TIMER is enabled, since
it is more accurate and provides its own weak definitions to override.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This commit replaced periodical timer with the wd_start_next to improve the timing accuracy.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit resolves a timing error caused by the round-up behavior in clock_time2ticks. In rare cases, this could lead to a two-tick increment within a single tick interval. To fix this, we introduced clock_time2ticks_floor, which guarantees the correct semantics for obtaining current system ticks.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
The missing <nuttx/spinlock.h> header caused following compile errors:
CC: clock/clock_adjtime.c clock/clock_adjtime.c: In function 'adjtime_wdog_callback':
clock/clock_adjtime.c:67:11: error: implicit declaration of function 'spin_lock_irqsave' [-Wimplicit-function-declaration]
67 | flags = spin_lock_irqsave(&g_adjtime_lock);
| ^~~~~~~~~~~~~~~~~
clock/clock_adjtime.c:78:3: error: implicit declaration of function 'spin_unlock_irqrestore' [-Wimplicit-function-declaration]
78 | spin_unlock_irqrestore(&g_adjtime_lock, flags);
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
When using alarm_arch implementation, 64-bit time can be returned. Using unsign long will cause precision loss.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
LD: nuttx.elf
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_sndinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_rcvinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
make[1]: *** [Makefile:128: nuttx.elf] Error 1
make: *** [tools/Unix.mk:551: nuttx.elf] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Change the type of task group member to single list chain to
avoid accessing the memory allocator to improve the performance
Signed-off-by: chao an <anchao@lixiang.com>
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
clock_getcycle always returns an incremented cycle value
If the hardware does not support perf event it will use arch_alarm's up_perf_gettime
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1) Previously adjustments less than 1 microsecond per tick would be
completely ignored. Now they are applied over a shorter period at
a rate of 1 us per tick.
2) Previously CLOCK_ADJTIME_PERIOD was in units of 1/100th of second.
Change to milliseconds to be more generally useful unit.
Change setting name to CLOCK_ADJTIME_PERIOD_MS to make the unit change
easier to notice.
3) Previously CLOCK_ADJTIME_SLEWLIMIT was in percentage.
Most clock crystals have better accuracy than 1%, so the minimum slew
rate was excessive. Change to CLOCK_ADJTIME_SLEWLIMIT_PPM with setting
value in parts per million.
4) No need to use floating point math in clock_adjtime.c.
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
