Prior to this commit, it wasn't possible to load ELF modules from
the external PSRAM. There were two main issues about it: 1) copying
data using the instruction bus was being used instead of the data
bus (this, per si, isn't a problem, but requires special attention
regarding data alignment), and 2) the cache was not being properly
cleaned and flushed to properly access the loaded data using the
instruction bus.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Optimize crc32 standard(poly:0x04C11DB7) and crc32
castagnoli(poly:0x1EDC6F41) with arm crc32 extension instructions.
For example, crc32 standard caculates(lookup crc32 table) 1812 bytes data,
reduced the time from 118 us to 14 us through optimization.
Performance improved ~700%
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
Summary:
- Replace direct use of `fence.i` instruction with `__ISB()` macro for instruction synchronization
- This change improves portability while maintaining the same functionality
Impact:
- No functional changes - both `fence.i` and `__ISB()` ensure instruction
synchronization on RISC-V
- Makes the code more maintainable by using the architecture abstraction
layer
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
It will be used to distinguish between hardware KASan and software KASan. Hardware KASan does not need to use plug-in
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Modify the kernel to use only atomic_xx and atomic64_xx interfaces,
avoiding the use of sizeof or typeof to determine the type of
atomic operations, thereby simplifying the kernel's atomic
interface operations.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Some armv7-m-based SoCs do not work with atomic instructions,
even though armv7-m supports them.
To avoid using atomic instructions generated by gcc,
CONFIG_LIBC_ARCH_ATOMIC is newly introduced with which
arch_atomic.c is linked explicitly.
However, the function names need to be changed to avoid
build errors, since the functions described in stdatomic.h
are gcc built-in and inlined when the code is compiled.
About libcxx with CONFIG_LIBC_ARCH_ATOMIC, it still
does not work. It is also needed to call nx_atomic_ ver
instead of __atomic ver in
libcxx/include/__atomic/cxx_atomic_lmpl.h.
Signed-off-by: Takuya Miyasita <Takuya.Miyashita@sony.com>
Some armv7-m-based SoCs do not work with atomic instructions,
even though armv7-m supports them.
To avoid using atomic instructions generated by gcc,
CONFIG_LIBC_ARCH_ATOMIC is newly introduced with which
arch_atomic.c is linked explicitly.
However, the function names need to be changed to avoid
build errors, since the functions described in stdatomic.h
are gcc built-in and inlined when the code is compiled.
Signed-off-by: Takuya Miyasita <Takuya.Miyashita@sony.com>
kasan does not instrument the assembly function,
so it is checked in advance before calling.
If Kasan is not turned on, the speed and space will
be almost unchanged under compiler optimization.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Use address addition and subtraction, no longer as the return value of the address. Tags must be removed before calculation
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
gprof can analyze code hot spots based on scheduled sampling.
After adding the "-pg" parameter when compiling, you can view the code call graph.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
