The documentation is now updated to reflect the new EMMC support. I have
also improved the format to match the standard board documentation
template, and included better support descriptions for features that
have varying levels of implementation.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Adding the stm32h5 pwm driver. This is almost an exact copy of the stm32h7 pwm driver. I confirmed the timers for the h5 are version v2 and added the preprocessor definition. This commit was tested on a stm32h5 nucleo-h563zi development board. Necessary board files and a pwm config have been added. Added pin mappings for all timer outputs.
Signed-off-by: kywwilson11 <kwilson@2g-eng.com>
Added documentation regarding nucleo-h563zi:pwm config.
Removed CONFIG_STM32H5_PWM guard at the top. Fixed IRQs for tim1 and tim8. Added H5 to list of Timer IP v2 timers.
Conditionally compile stm32_serial.c.
Add stm32_pwm.c to CMakeLists.txt
Migrated legacy README.txt documentation to RST format which aligns with
the standard template for board documentation.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrated legacy README.txt documentation to RST format following the
standard board documentation template.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrate README.txt about ROMFS to SIM documentation in RST format. Also
cleans up the formatting of the board documentation to leverage RST's
features.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrate the legacy README.txt documentation file to RST format following
the standard board template.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Added ioctls and functions for watchdogs 2 & 3. Modifed wdog1 functions. Needs testing.
Fixed issues with started variable.
Change to add only 3 ioctls, a config for each watchdog. Created cfg structures for watchdog1 and watchdog23. Added code to set difsel register. stop conversions before changing watchdog configs. Other logic changes.
Define AN_STM32H5_FIRST and AN_STM32H5_NCMDS in nuttx/analog/ioctl.h
Remove hardcoded AN_STM32H5_FIRST.
Style fixes.
Fix thershold for watchdog1
Got working watchdog driver with queue and signal. Needs polish.
Refined isr for watchdogs. Added value back to event. value is more accurate, but not guaranteed. It accomdates dma.
Used stm32_adc_sigcfg_s structure inside stm32_adc_sig_s structure. Used common naming for ioctls.
Added stopifstarted and startifstopped for setting watchdogs and other bits. Added adc_reset_dma, which must be run after stopping conversions in circular mode, because buffer and conversions become misaligned. Other refinements.
Added guard around adc_reset_dma, added comment blocks to new functions
NuttX style fixes.
Add return value to wdog configure functions.
Correct number of stm32h5 adc ioctls.
Minor style fix.
Reduce watchdog commit to fit NuttX standards. Remove Queue and Signal aspects. Added Kconfig to initialize watchdog.
Signed-off-by: kywwilson11 <kwilson@2g-eng.com>
Added guard around code referencing priv->circular. Added adc_watchdog config for testing watchdog1 with adc1. Added documentation about adc_watchdog config.
Adjusted documentation for adc_watchdog config. Added detailed test procedure.
Longer underline under adc_watchdog title.
Add code for differential adc calibration. Need to calibrate both single-ended and differential if a given adc has both single-ended and differential channels.
Fixed typo.
Initialize watchdog1 parameters at compile time when configured. Added comments to new elements in stm32_dev_s. Confirmed style is good.
Add proper guards around ADC WDG1 variables and functions.
Implemented feedback per raiden00. 1. Changed to use old chanlist type uint8_t. 2. Added smpr1, smpr2, and difsel variables to stm32_dev_s structure. 2. smpr1 and smpr2 are initialized to board defined values if BOARD_ADCx_SMPRx is defined, otherwise initialized to default. 3. difsel initialized to BOARD_ADCx_DIFSEL if defined, otherwise use default (0) for all single-ended.
This commit adds an entry on Documentation regarding ESP32-C3,
ESP32-C6 and ESP32-H2 boards that implement the `buttons` defconfig
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Add documentation for the WeAct STM32H750 board, including
board features, LED configuration, UART setup, SDMMC interface, available
configurations (nsh, usbnsh, sdcard, st7735), and flashing instructions
via DFU and SWD.
Signed-off-by: Sergey Rzhevsky <rzsa@yandex.ru>
Add documentation for new oa_tc6 defconfig into esp32c6-devkitc and esp32c6-devkitm boards docs.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
Initial I2C implementation such that I2C sending and receiving now
works well enough to use the BMP280 driver for a BMP280 device connected
to any of I2C0-I2C6 on the default pins. I2CTOOL also works for these
interfaces.
Functionality for "no stop" and "no start" options is not present.
Implementing that is not clear from the peripheral datasheet and will be
a challenge.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrated the legacy README.txt to RST format. I removed some information
which no longer applies since 2008 when this documentation was written.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
"tc397" is a chip name which is not appropriate to act as a board name.
the board supported here is actually "a2g-tc397-5v-tft".
The correct definition is : tricore is arch name, tc3xx is arch family
name, tc397 is chip name and the borad name is a2g-tc397-5v-tft
Introduce EXT1 wakeup functionality to the ESP32-S3 power management
subsystem. With this feature, the ESP32-S3 can wake up from PM_STANDBY
or PM_SLEEP when one or more RTC GPIOs trigger the EXT1 condition.
Changes include:
- Added EXT1 wakeup configuration and preparation logic in rtc code.
- Integrated EXT1 handling in pmstandby() and pmsleep().
- New board-level Kconfig options under ESP32-S3 DevKit menu:
- CONFIG_PM_EXT1_WAKEUP: enable EXT1 wakeup support
- CONFIG_PM_EXT1_WAKEUP_RTC_GPIO<n>: select RTC GPIOs as wake sources
- CONFIG_PM_EXT1_WAKEUP_TRIGGER_MODE: choose wakeup on HIGH or LOW level
- Fixing Kconfig style
- Fixing comments standard
- Adding PM documentation for esp32s3-devkit
Impact:
- No build impact unless CONFIG_PM_EXT1_WAKEUP is enabled.
- When enabled, ESP32-S3 can wake from low-power states via RTC GPIOs.
- No new public API introduced; controlled via board Kconfig.
Tested on ESP32-S3 DevKit:
- Configured GPIO4 and GPIO5 as EXT1 wake sources.
- Verified wakeup from light sleep and deep sleep on external signals.
- Wakeup reason correctly reported as EXT1.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Add a new defconfig that includes support for an ADS7046 sensor
and extend the existing documentation to include its description.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
- Added esp32s3_board_spislavedev.c with board-level SPI slave logic
- Added esp32s3_board_spislavedev.h public header in common/include
- Updated Make.defs to include the new source when CONFIG_SPI_SLAVE_DRIVER=y
- Adding spislv board config to esp32s3-devkit
- Adding documentation of esp32s3 devkit spi slv
- Fixing path include in esp32s3_board_spislavedev.c
- Fixing relative path in the header of esp32s3_board_spislavedev.h
- Removing neasted check in Make.defs, consistency reasons
This provides initial support for SPI slave device initialization
on ESP32-S3 boards, making the feature available under conditional
build configuration.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Add support for the Texas Instruments TMP112 I2C/SMBus digital
temperature sensor. Also add a new defconfig that includes
support for a TMP112 sensor and extend the existing documentation
to include its description.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
