Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-09-10 02:46:33 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
32606 commits 24 branches 205 tags 534 MiB
Commit graph

32606 commits

This branch
This branch
All branches
Author SHA1 Message Date
Gregory Nutt
f6c6723d88 SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device 2015-08-21 12:30:29 -06:00
Gregory Nutt
89b5ef8d35 wdogs: Fix counting of free, pre-allocated wdog timers. The could could get decremented below zero in some situations 2015-08-21 11:30:22 -06:00
Pavel Pisa
12b1c04508 recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is enabled. Fix size accounting when recvfrom_udpreadahead() sets state.rf_recvlen == -1. I have not checked if data are accumulated to the right position in the buffer however. 
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
 2015-08-21 09:15:06 -06:00
Gregory Nutt
da6c5aabdf All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa 2015-08-21 08:42:24 -06:00
Max Neklyudov
622c5c9aa6 Another TUN driver fix from Max Neklyudov 2015-08-21 07:40:13 -06:00
Gregory Nutt
0b3b104b74 Remove unnecessary step in previous commit 2015-08-20 16:21:45 -06:00
Gregory Nutt
2a81a76c33 Update ChangeLog 2015-08-20 07:56:20 -06:00
Pavel Pisa
c0881c36a3 Do not (re)define CONFIG_LPC17_SDRAM_32BIT to not conflict with config. If CONFIG_LPC17_SDRAM_16BIT it is defined anyway and with correct symbol redefinition suppression. From Pavel Pisa. 2015-08-20 07:55:02 -06:00
Pavel Pisa
387f76d455 This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa 2015-08-20 07:46:18 -06:00
Gregory Nutt
5196a4183c SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address 2015-08-19 11:36:38 -06:00
Gregory Nutt
0db7ac92d9 Minor coding style fixes in last commit; remove some unneeded debug output 2015-08-19 07:54:46 -06:00
Gregory Nutt
098f1035fc Merged in seanshpark/nuttx_arch/stm32net (pull request #6) 
STM32: Fix eth mem leak in recvframe
 2015-08-19 07:49:30 -06:00
SaeHie Park
75626fb071 STM32: Fix eth mem leak in recvframe 2015-08-19 15:40:04 +09:00
Gregory Nutt
470a95aa4f Update submodule 2015-08-18 13:24:47 -06:00
Gregory Nutt
f4b35662ec Trivial removal of trailing whitespace 2015-08-18 13:24:24 -06:00
Gregory Nutt
02306044b2 boardctl.h: Extended boardctl() commands with BOARDIOC_CAN_INITIALIZE 2015-08-18 13:23:34 -06:00
Gregory Nutt
88660657c2 Rename can_devinit() to board_can_initialize(). Hook in to boardctl() with BOARDIOC_CAN_INITIALIZE 2015-08-18 13:21:45 -06:00
Gregory Nutt
cfd4f943da SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more 2015-08-18 11:56:07 -06:00
Gregory Nutt
28853e5932 CAN: Define IOCTL commands to get and set the bit timing values 2015-08-18 11:21:01 -06:00
Gregory Nutt
4b96605f93 SAMV7 MAN: Add support for bit timing IOCTL commands 2015-08-18 11:20:22 -06:00
Gregory Nutt
505d5f8103 CAN: Add error bit values 2015-08-18 08:48:39 -06:00
Gregory Nutt
ff84e67e59 SAMV7 MCAN: Add logic to report CAN errors 2015-08-18 08:48:13 -06:00
Gregory Nutt
a987379e64 Add an error bit to the CAN message report 2015-08-18 07:27:00 -06:00
Gregory Nutt
bc9b901e13 Update README 2015-08-18 07:24:37 -06:00
Gregory Nutt
b7d6720a23 All CAN drivers: Set the new error indication to zero in the CAN message report 2015-08-18 07:24:12 -06:00
Gregory Nutt
c01d3298e5 Merged in paulpatience/nuttx-arch (pull request #5) 
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 12:55:32 -06:00
Paul A. Patience
c800841632 Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, 
STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 14:00:49 -04:00
Gregory Nutt
42fc5a9198 Update submodule 2015-08-17 11:49:40 -06:00
Gregory Nutt
531456d20c Fix deadlock when closing the MCAN device driver 2015-08-17 11:49:20 -06:00
Gregory Nutt
4f122d5290 SAMV71 MCAN: Default clock source should be MCK, not MAIN 2015-08-17 11:03:15 -06:00
Gregory Nutt
95634a3b34 CAN IOCTLs: Should support standard CAN filtering in extended ID mode 2015-08-17 10:53:49 -06:00
Gregory Nutt
ff38abf580 SAMV7 MCAN: Should support standard CAN IDs in extended ID mode 2015-08-17 10:52:58 -06:00
Max Neklyudov
425146255a Network drivers: Fix bug in tun interface driver. From Max Neklyudov 2015-08-17 09:04:58 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
ba6c0b3fa3 Fix more common typos 2015-08-16 11:06:29 -06:00
Gregory Nutt
77f5c34af0 Fix some common typos 2015-08-16 11:00:30 -06:00
Gregory Nutt
4a0f89168a SAMV71-XULT: Update README 2015-08-16 10:59:35 -06:00
Gregory Nutt
e29220183a Fix some common typos 2015-08-16 10:59:10 -06:00
Gregory Nutt
9e5e91c204 SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional 2015-08-16 08:55:44 -06:00
Gregory Nutt
2478d27dd8 Update submodules 2015-08-15 13:03:31 -06:00
Gregory Nutt
b503bf6ca1 SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts 2015-08-15 13:00:32 -06:00
Gregory Nutt
9d7301f474 SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward 2015-08-15 10:41:15 -06:00
Gregory Nutt
a33bcc42fd Update ChangeLog 2015-08-14 18:13:57 -06:00
Gregory Nutt
651317ee49 SAML21: Various SERCOM fixes 2015-08-14 18:11:02 -06:00
Gregory Nutt
348060f5d2 SAMV7: Add QSPI Register Definition Header File 2015-08-14 18:11:01 -06:00
Gregory Nutt
1c41236fa1 Merged in paulpatience/nuttx (pull request #18) 
Added support for other MS58XX altimeters.
 2015-08-14 18:09:14 -06:00
Paul A. Patience
3303ef8c85 Added support for other MS58XX altimeters. 2015-08-14 20:04:16 -04:00
Gregory Nutt
8f7453b5ec Addings to stdlib.h must be added to cstdlib too 2015-08-14 12:04:57 -06:00
Gregory Nutt
150f79a198 Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3 2015-08-14 10:24:56 -06:00
Gregory Nutt
eb19e0c0e2 Add two files that I forgot in a previous commit 2015-08-14 10:12:04 -06:00