reason:
svc call may trigger hardfault
Background
The origin of this issue is our desire to eliminate the function of storing
"regs" in g_current_regs and instead utilize (*running_task)->xcp.regs for storage.
The benefits of this approach include faster storage speed and
avoiding multiple accesses to g_current_regs during context switching,
thus ensuring that whether returning from an interrupt or an exception,
we consistently use this_task()->xcp.regs
Issue Encountered
However, when storing registers, we must ensure that (running_task)->xcp.regs is invalid
so that it can be safely overwritten.
According to the existing logic, the only scenario where (running_task)->xcp.regs
is valid is during restore_context. We must accurately identify this scenario.
Initially, we used the condition (running_task)==NULL for this purpose, but we deemed
this approach unsatisfactory as it did not align well with the actual logic.
(running_task) should not be NULL. Consequently, we adopted other arch-specific methods for judgment,
but due to special logic in some arch, the judgment was not accurate, leading to this issue.
Solution:
For armv6-m, we haven't found a more suitable solution, so we are sticking with (*running_task)==NULL.
For armv7-m/armv8-m, by removing support for primask, we can achieve accurate judgment.
PRIMASK is a design in armv6-m, that's why arm introduce BASEPRI from armv7-m.
It's wrong to provide this option for armv7-m/armv8-m arch.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The Kconfig of system/usbmsc has updated to support setting paths that bind to LUN at runtime.
More details: https://github.com/apache/nuttx-apps/pull/2876
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
reason:
up_set_current_regs initially had two functions:
1: To mark the entry into an interrupt state.
2: To record the context before an interrupt/exception. If we switch to
a new task, we need to store the upcoming context regs by calling up_set_current_regs(regs).
Currently, we record the context in other ways, so the second function is obsolete.
Therefore, we need to rename up_set_current_regs to better reflect its actual meaning,
which is solely to mark an interrupt.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Split nucleo-f4x1re into nucleo-f401re and nucleo-f411re.
These are separate boards and should be in separate directories as it's
done for all other nucleo boards in NuttX
This patch fix _eronly value which is used during boot process to initialize
.data section to sram.
Since .data section is 4 byte aligned in flash, also _eronly must follow this
alignment to stay coherent with the start address of .data.
If one of the sections preceeding .data has a size which is not 4 byte aligned,
the _eronly value does not match with .data physical address resulting in wrong
copy of data section to sram and thus an almost immediate hardfault.
Signed-off-by: Federico Braghiroli <federico.braghiroli@gmail.com>
* It seems that they assume up_putc() and syslog() outputs to the
same device. Depending on the system and configurations, it's wrong.
* They are wrapped with "#if 0" and unused.
Fixes https://github.com/apache/nuttx/issues/14694
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Added a flash driver for the STM32G4 series. The primary change here is
the addition of stm32g4xxx_flash.c. This file uses the STM32L4 flash
driver as a template. The primary difference is the accounting for dual
banks with different page sizes.
Fixed error while building b-g474e-dpow1/buckboost. It was possible (technically) to have page be used uninitialzied. Changing the if statement to default to using a flash_page_size == 2048 fixes this issue.
The default bpp is STM32_LTDC_L1_L8, when TM32_FB_CMAP=y,and The default bpp is STM32_LTDC_L1_RGB565 when TM32_FB_CMAP=n. The color-format bpp of stm32f429i is 16, so we should be disable TM32_FB_CMAP, otherwise fb demo will result in an error.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
up_interrupt_context indicates that we self inside interrupt/handler mode,
replaced to private function is_nesting_interrupt to make less confused.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
1. Kconfig - Removed USART1 config option from STM32_STM32G47XX. Not necessary to adding LPUART functionality. 2. stm32_lowput.c - Added extra check from STM32G4 board because that is the only with LPUART functionality. 2. stm32_serial.c - Removed unneeded function (stm32_serial_get_lpuart). Fixed up_putc return bug. Added configuration for DMAMAP_LPUART RX and TX for STM32G4XXX only. The G4 is the only in this family with LPUART and uses a DMAMUX unlike the others.
1. Removed 1WIRE LPUART refereences in Kconfig and stm32_uart.h. There is no support for LPUART currently in stm32_1wire.c. 2. Removed references to LPUART under DMA_V2 ifdefs. STM32G4 uses DMA_V1, and I saw that none of the chips DMA_V2 (F20, F4) have LPUARTs. AFAIK the only chip in the stm32 folder that has LPUART peripherals is the STM32G4.
Removed unnecessary brackets and empty lines
Added lpuartnsh (LPUART NuttShell) config to the nucleo-g474re board configurations. nsh uses USART3 by default. lpuartnsh uses nsh as a template, changes the serial console to LPUART1, and adds the DMA configs to enable DMA for the LPUART.
Added support for using the lpuart prescaler register. Without prescaling the apbclock, 9600 baud is not supported on the G474RE. By utilizing the prescaler, when necessary, we can support nearly any baud rate (300 baud to 30M Mbaud). lowputc defaults to a prescaler of 16 for the lpuart so standard baud rates (9600 to 115200) are supported early in the boot process. Later in stm32_serial.c the ideal prescaler and BRR values are determined.
Added ifdef statements for LPUART code sections not compatible with other chips.
Changed LPUART BRR calcuation to use 64-bit integers.
Feedback from nuttx pull request. Added brackets around single line if/else statements. Reordered lpuartnsh defconfig file.
Fix lpuart brr calculation after attempting to break the calculation into 2 lines.
Removed TAB
LD: nuttx
arm-none-eabi-ld: /home/ligd/platform/mainline/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 40 bytes
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:538: nuttx] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 16 bytes
Signed-off-by: zhangshoukui <zhangshoukui@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
