This reverts commit fa652f9c24.
When testing iperf on boards such as ESP32-C6, ESP32-C3, and ESP32,
blocking issues are encountered, so the patch is reverted.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The main content of this submission is to limit both the TX/RX buffers
of TCP/UDP to throttled IOBs, avoiding impacts on the sending and
receiving of control-type messages.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The RFC requires sending an TCP_RST packet in this scenario, so to better
comply with the standard definition, the sending of TCP_RST is added.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
urgent data needs to be treated as normal data when
CONFIG_NET_TCPURGDATA disable. some test sets will verify this
behavior, correct the processing logic.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
optimize the current code format according to the previous net_xxx_wait
implementation to reduce multiple calls of similar code
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
reduce the execution consumption of irrelevant code
testing the TX rates of TCP and UDP based on the Infineon board can
increase them by 13%.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
According rfc793 p69, from state SYN-RECEIVED to state TIME-WAIT, if the incoming segment is not acceptable, an acknowledgment should be sent in reply (unless the RST bit is set):
<SEQ=SND.NXT><ACK=RCV.NXT><CTL=ACK>
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
According rfc793 p69, In SYN-RCVD state, if the incoming segment is not acceptable, an acknowledgment should be sent in reply (unless the RST bit is set):
<SEQ=SND.NXT><ACK=RCV.NXT><CTL=ACK>
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
According to RFC793, the flags of TCP reply packet should be as follows:
1. `RST` if flags of request packet has `ACK`
2. `RST|ACK` if flags of request packet has no `ACK`, at the same time, the sequence should be set to zero.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
in multi-core cpu, tcp_free and tcp_timer_expiry->tcp_timer will work in parallel, after tcp_free call work_cancle, tcp->timer will call tcp_update_timer to re-add work to worker queue, then tcp_free free conn, in this condition, it will result use after free.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
According RFC793,p72~p73 In states from ESTABLISHED to LASTACK:"If the ACK acks something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return"
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
in the current process, if tcpstate is at TCP_FIN_WAIT_1, TCP_CLOSING,
and TCP_LAST_ACK, and the peer does not reply TCP_ACK, it will be
retransmitted permanently. to avoid continuous occupation of resources,
now when the retransmission equals TCP_MAXRTX, a reset message will be
sent and the conn resources will be reclaimed in tcp_close_work.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
since we added TCP_TXCLOSE and TCP_RXCLOSE, only RST-like exception
flows now trigger TCP_CLOSE events, so replace the remaining
TCP_CLOSE with TCP_ABORT.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
notify the local waiting recv process; otherwise, after the peer TX
is closed, the wait of the recv process will continue to wait.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
shutdown should send TCP_FIN packet.
close should send TCP_RST packet when the data in readahead has not been
read and NEW_DATA has arrived.
send TCP_FIN packet when in other cases.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
after the listener fd is closed, the half-open connections associated
with the listener are not reclaimed. According to the protocol standard,
they should be reclaimed in a timely manner.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
UDP and PKT will hold the dev lock and conn lock when calling back the
protocol stack from the network dirver. At this time, if the poll_notify
notifies usrsock_server and executes poll_teardown, a conn double lock
will appear. so we changed the lock to a recursive lock
sched_dumpstack
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/Libs/libc/sched/sched_dumpstack.c:71
__assert
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/libs/libc/assert/lib_assert.c:49
nxsem_wait_slow
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/semaphore/sem_wait.c:102 (discriminator 1)
nxmutex_lock
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/include/nuttx/mutex.h:514
udp_pollteardown
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:278
usrsock_rpmsg_poll_setup
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1232
usrsock_rpmsg_poll_cb
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1299
poll_notify
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_poll.c:296
udp_poll_eventhandler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:105
devif_conn_event
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/devif_callback.c:481
udp_callback
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_callback.c:324
udp_input_conn
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_input.c:150
ipv4_in
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:425
ipv4_input
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:533
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
file_writev_compat
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_write.c:89
rpmsgdev_write_handler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/misc/rpmsgdev_server.c:354
rpmsg_virtio_process_rx_buffer
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:256
rpmsg_virtio_rx_worker
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:291
work_dispatch
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:233
work_thread
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:293
nxtask_start
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/task/task_start.c:99
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
add net_lock in the tcp_callback_cleanup & Set the devif_callback_s of
tcp_callback_s to a two-dimensional pointer.
Signed-off-by: wangchen <wangchen41@xiaomi.com>
use netdev_list_lock to protect all network card traversal, registration,
and deregistration operations.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
the maximum retransmission interval allowed for car projects
cannot exceed 6 seconds, and allows for fixed retransmission intervals.
according to the previous algorithm, the retransmission interval
may be 0.5 * 2 ^ 4 = 8 seconds, which does not meet the requirements.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
CLOSE-WAIT - represents waiting for a connection termination request
from the local user.
TCP A TCP B
1. ESTABLISHED ESTABLISHED
2. (Close)
FIN-WAIT-1 --> <SEQ=100><ACK=300><CTL=FIN,ACK> --> CLOSE-WAIT
3. FIN-WAIT-2 <-- <SEQ=300><ACK=101><CTL=ACK> <-- CLOSE-WAIT
4. (Close)
TIME-WAIT <-- <SEQ=300><ACK=101><CTL=FIN,ACK> <-- LAST-ACK
5. TIME-WAIT --> <SEQ=101><ACK=301><CTL=ACK> --> CLOSED
6. (2 MSL)
CLOSED
in the current state, we can continue to send data until the user
calls shutdown or close, then directly enter the TCP_LAST_ACK state
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
when dev is down, tcp_pollsetup returns the value 'OK' and sets the connection status to 'down' and eventset to POLLERR & POLLUP
Signed-off-by: wangchen <wangchen41@xiaomi.com>
After first connection refused happend,The user use the same connection failed,becasue the tcpstateflags is not TCP_ALLOCATED
Signed-off-by: wangchen <wangchen41@xiaomi.com>
When triggering TCP retransmission through a timer, conn->unacked_q will save more packets, which may result in sndseq being equal to ackseq. Previous implementations may cause conn->nrtx to not be cleared, leading to an increase in conn->rto errors and a longer timer time
Signed-off-by: wangchen <wangchen41@xiaomi.com>
The modification is to solve the problem that the opposite end cannot receive the retransmission message, and the protocol stack no longer sends retransmission messages
Signed-off-by: wangchen <wangchen41@xiaomi.com>
since the current txnotify is executed synchronously at the location of
the current call without switching threads, resources such as d_iob need
to be cached first.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
TCP_CORK and TCP_NODELAY behave almost exactly the opposite,
so first provide simple support for TCP_CORK.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
If the NET_TCPBACKLOG configuration is not enabled, no I/O event will be
triggered for the socket file descriptor in poll/epoll. As a result, the
connection will not be accepted, leading to a failure in the TCP handshake.
The problem is that users may not have noticed this configuration,
no event will be received when polling the socket fd.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
The TCP keep-alive implementation would send the probes and abort the
connection correctly, but without waking up the affected socket and
marking the connection as aborted. This patch from zhhyu7 in #16447
resolves the issue.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
