Change every occurence of up_switch_context to use this_task() as the first parameter.
"nxsched_add_readytorun" returns "true" if context switch is required. "nxsched_add_readytorun"
typically could only switch the assigned/running task to the one which is passed in as parameter.
But this is not strictly guaranteed in SMP; if other CPUs tweak with affinities or priorities,
it may be possible that the running task after the call is changed, but is some other
task from the readytorun list (and it should be, if there is higher priority one available or the
affinity of the added task prevents it to be scheduled in, but the previous head of the readytorun
list should run.
this_task() is always the correct one to switch to, since it always points to the tcb which was
just switched in by the nxsched_add_readytorun.
This is also a precursor to re-writing the SMP queue logic to remove pending lists for SMP.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This is not a bug, but unnecessary code. If the mutex is no longer blocking,
the released thread will set the holder and clear the blocking bit in the end
of nxsem_wait.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This puts the mutex support fully inside nxsem, allowing
locking the mutex and setting the holder with single atomic
operation.
This enables fast mutex locking from userspace, avoiding taking
critical_sections, which may be heavy in SMP and cleanup
of nxmutex library in the future.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The kernel mapping should be performed in sem_wait (thread level) as
virtual memory mappings cannot be added from interrupt, at least for now.
The reason?
kmm_map() depends on mm_map_add(), which in turn uses a mutex for mutual
exclusion. Using mutexes from interrupt level is not permitted.
Mapping tcb->waitobj into kernel virtual memory directly in sem_wait()
makes sense, since accessing tcb->waitobj via a user virtual address can
lead to unexpected results (the wrong mappings can be in place).
The temporary mappings via addrenv_select() and addrenv_restore() simply
do not work from interrupt, so remove its usage and replace with kmap
which is safe.
Add sem_wait fast operations, use atomic to ensure
atomicity of semcount operations, and do not depend
on critical section.
Test with robot:
before modify:
nxmutex_lock cost: 78 ns
nxmutex_unlock cost: 82 ns
after modify:
nxmutex_lock cost: 28 ns
nxmutex_unlock cost: 14 ns
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
This reverts commit befe29801f.
Because a few regressions have been reported and
it likely will take some time to fix them:
* for some configurations, semaphore can be used on the special
memory region, where atomic access is not available.
cf. https://github.com/apache/nuttx/pull/14625
* include/nuttx/lib/stdatomic.h is not compatible with
the C11 semantics, which the change in question relies on.
cf. https://github.com/apache/nuttx/pull/14755
Add sem_wait fast operations, use atomic to ensure
atomicity of semcount operations, and do not depend
on critical section.
Test with robot:
before modify:
nxmutex_lock cost: 78 ns
nxmutex_unlock cost: 82 ns
after modify:
nxmutex_lock cost: 28 ns
nxmutex_unlock cost: 14 ns
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Store the old environment in a local context so another temporary address
environment can be selected. This can happen especially when a process
is being loaded (the new process's mappings are temporarily instantiated)
and and interrupt occurs.
sem_t is user memory and the correct mappings are needed to perform
the semaphore wait interruption.
Otherwise either a page fault, or access to the WRONG address environment
happens.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
sched/mqueue: Rename all private static functions for use the nxmq_ vs. mq_ naming.
sched/mqueue: Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_. The mq_ prefix is reserved for standard application interfaces.
This is analogous to similar renaming that was done previously for semaphores.
Squashed commit of the following:
sched/signal: Fix a few compile warnings introduced by naming changes.
sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix.
sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
