according to the posix standard: the default action for SIGURG is to
ignore the signal, we need to add the default sigaction handler for
SIGURG
this fix the /tset/ANSI.os/signal/signal_X/T.signal_X testcase
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The hrtimer infrastructure only works with 64-bit system timers.
Add a dependency on SYSTEM_TIME64 in the hrtimer Kconfig.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
This commit added dependency on CONFIG_SYSTEM_TIME64 for the hrtimer, sin
ce the hrtimer use `clock_compare` to compare 64-bit time.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This patch implements clock_adjtime() with CLOCKFD support, enabling
precise time and frequency adjustments for PTP clocks through the
standard POSIX clock API.
Key changes include:
1. New clock_adjtime() system call:
- Added sched/clock/clock_adjtime.c implementation
- Provides POSIX-compliant time adjustment interface
- Supports both standard clocks and CLOCKFD-based dynamic clocks
- Added CONFIG_CLOCK_ADJTIME Kconfig option
2. CLOCKFD support in clock_adjtime():
- Detects CLOCKFD-encoded clockids via CLOCKFD_TO_FD() check
- Extracts file descriptor and validates through fs_getfilep()
- Issues PTP_CLOCK_ADJTIME ioctl to underlying PTP clock device
- Returns clock status and adjustment results via struct timex
3. Enhanced struct timex support:
- Extended include/sys/timex.h with additional ADJ_* flags
- Added ADJ_OFFSET, ADJ_FREQUENCY, ADJ_MAXERROR, ADJ_ESTERROR
- Added ADJ_STATUS, ADJ_TIMECONST, ADJ_TAI, ADJ_SETOFFSET
- Added ADJ_MICRO, ADJ_NANO for time unit selection
- Added STA_* status flags for clock state reporting
4. Clock operations supported:
- ADJ_SETOFFSET: Apply time offset adjustment
- ADJ_FREQUENCY: Adjust clock frequency (PPM)
- ADJ_MAXERROR: Set maximum error estimate
- ADJ_ESTERROR: Set estimated error
- ADJ_STATUS: Modify clock status bits
- ADJ_NANO: Use nanosecond resolution
- ADJ_SETOFFSET: Set absolute time offset
5. API declarations:
- Added clock_adjtime() prototype in include/nuttx/clock.h
- Enabled by CONFIG_CLOCK_ADJTIME configuration
- Compatible with Linux clock_adjtime() interface
Usage example:
int fd = open("/dev/ptp0", O_RDWR);
struct timex tx = {0};
tx.modes = ADJ_FREQUENCY;
tx.freq = 10000000; /* Adjust frequency by 10 PPM */
clock_adjtime(CLOCKFD(fd), &tx);
close(fd);
This completes the PTP clock framework's POSIX clock API integration,
providing comprehensive time control capabilities for precision timing
applications including PTP synchronization daemons (ptp4l, timemaster).
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
NuttX provides the wdog module to implement timers for the scheduler.
While it is lightweight and efficient, wdog only supports tick-level timers,
typically in milliseconds. Although the tick duration can be configured,
setting it to microsecond or nanosecond resolution is not practical.
Doing so may cause an interrupt storm, where the CPU is constantly
occupied handling tick interrupts.
To address this limitation, a new hrtimer module is introduced.
It coexists with the wdog module, providing both tick-level timers
for wdog and high-resolution timers (nanosecond-level) directly to users.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
move both suspned and resume logic to nxsched_switch_context
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Curernt implementation default semaphore max allowed value to SEM_VALUE_MAX.
In some cases, user may want to change this, so provide a function to do this: sem_setmaxvalue
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
This commit adds simple implementation of guardsize for pthreads.
At this moment this option simply increases the size of allocated pthread stack.
At default pthread guard size is set to 0.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This commit added CONFIG_TIMER_ADJUST_USEC to support the time compensation for wdog timer. Normally, timer event cannot triggered on exact time due to the existence of interrupt latency. Assuming that the interrupt latency is distributed within [Best-Case Execution Time, Worst-Case Excution Time], we can set the timer adjustment value to the BCET to reduce the latency.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
After pthread mutexes changed to nxmutex, the priority inheritance
was set on by default; even if one tried to control it with
CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_INHERIT.
Also the CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_PROTECT is not effective.
Fix this by setting the default mutex priority adjustment flags according
to CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_INHERIT and CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_PROTECT.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Coredump doens't need CONFIG_ELF to be enabled, but need elf.h to include correct elf32.h or elf64.h.
Select LIBC_ARCH_ELF in COREDUMP to allow LIBC_ARCH_ELF_64BIT to be
defined correctly.
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
These options are unistd-specific and should not be filesystem dependent,
and also not suitable for define in the sched directory.
Signed-off-by: chao an <anchao.archer@bytedance.com>
1. CONFIG_ARCH_COVERAGE has been replaced by CONFIG_SCHED_GCOV
2. Delete the SIM-specific GCOV_ALL configuration and change it to a universal configuration for all architectures
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
since bootloader may call modlib functions directly
to load elf firmware without binfmt, dlfcn or module.
BTW, this patch also remove the duplicated selecttion
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
gprof can analyze code hot spots based on scheduled sampling.
After adding the "-pg" parameter when compiling, you can view the code call graph.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Do not format immediately when calling sched_note_printf, but delay formatting until dump trace.
After turning on SYSTEM_NOTE, similar asynchronous syslog functions can be achieved.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Record all memory allocation and release, save to ram, used to analyze memory allocation rate and memory usage
Its absolute value is not trustworthy because the memory will be allocated in thread A and released in thread B
netinit-5 [0] 0.105984392: tracing_mark_write: C|5|Heap Usage|96|free: heap: 0x606000000020 size:24, address: 0x603000000370
netinit-5 [0] 0.105996874: tracing_mark_write: C|5|Heap Usage|24|free: heap: 0x606000000020 size:72, address: 0x6070000008e0
nsh_main-4 [0] 3.825169408: tracing_mark_write: C|4|Heap Usage|2177665|free: heap: 0x606000000020 size:424, address: 0x614000000840
nsh_main-4 [0] 3.825228525: tracing_mark_write: C|4|Heap Usage|14977|free: heap: 0x606000000020 size:2162688, address: 0x7f80a639f800
nsh_main-4 [0] 3.825298789: tracing_mark_write: C|4|Heap Usage|15189|malloc: heap: 0x606000000020 size:20, address: 0x6030000003a0
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
* sched/Kconfig
(INIT_ENTRYPOINT): Document that the signature of "main" must take
"argc" and "argv" or else compilation error results, as discussed in
the email thread below [1].
References:
[1] dev@nuttx.apache.org email thread:
"basically, I get an error when I do make" started 18 Jul 2024,
archived:
https://lists.apache.org/thread/9j2s3647ysdhy204g4ombn4o09bn11c1
and elsewhere.
This adds pre-allocation and dynamic allocations for sigactions.
Current behavior can be acheived by setting SIG_ALLOC_ACTIONS to
a number larger than 1.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
