optimize the current code format according to the previous net_xxx_wait
implementation to reduce multiple calls of similar code
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
reduce the execution consumption of irrelevant code
testing the TX rates of TCP and UDP based on the Infineon board can
increase them by 13%.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
UDP and PKT will hold the dev lock and conn lock when calling back the
protocol stack from the network dirver. At this time, if the poll_notify
notifies usrsock_server and executes poll_teardown, a conn double lock
will appear. so we changed the lock to a recursive lock
sched_dumpstack
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/Libs/libc/sched/sched_dumpstack.c:71
__assert
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/libs/libc/assert/lib_assert.c:49
nxsem_wait_slow
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/semaphore/sem_wait.c:102 (discriminator 1)
nxmutex_lock
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/include/nuttx/mutex.h:514
udp_pollteardown
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:278
usrsock_rpmsg_poll_setup
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1232
usrsock_rpmsg_poll_cb
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1299
poll_notify
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_poll.c:296
udp_poll_eventhandler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:105
devif_conn_event
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/devif_callback.c:481
udp_callback
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_callback.c:324
udp_input_conn
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_input.c:150
ipv4_in
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:425
ipv4_input
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:533
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
file_writev_compat
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_write.c:89
rpmsgdev_write_handler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/misc/rpmsgdev_server.c:354
rpmsg_virtio_process_rx_buffer
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:256
rpmsg_virtio_rx_worker
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:291
work_dispatch
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:233
work_thread
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:293
nxtask_start
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/task/task_start.c:99
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Some third-party network libraries use PACKET_ADD_MEMBERSHIP to add MAC
addresses to devices, and this patch can add support for this.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
According to the definitions of PF_PACKET and SOCK_DGRAM,
extend the current protocol stack pkt protocol to support SOCK_DGRAM mode.
Some third-party network libraries use AF_PACKET, SOCK_DGRAM type sockets
to construct packets and send/receive data, This patch can add support
for this.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
on some device, the wifi driver uses dev->d_len as the length of the sent packet. However, due to the lack of update in d_len, the sent packet is not considered a normal packet and is not processed by the other end
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Ref: https://man7.org/linux/man-pages/man7/packet.7.html
1. For `socket(AF_PACKET, int socket_type, int protocol)`: When `protocol` is set to `htons(ETH_P_ALL)`, then all protocols are received. If `protocol` is set to zero, no packets are received.
2. For `bind`: `bind` can optionally be called with a nonzero `sll_protocol` to start receiving packets for the protocols specified.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When app send a pkt-packet, then it will read back it and case some problem. Connection should not read back the message sent by itself.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
Our net socket connection allocations are powerful but redundant
because they're implemented once in each protocol. This is not good for
further optimizing and extending to other allocations, so maybe we can
add a common implementation for the usage.
Impact:
1. We add a `struct net_bufpool_s` as pool descriptor, which may use a
little bit more memory than previous implementation (~28Bytes).
2. We share same functions between pools, so code size may shrink under
some scenarios.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Fix minor problems when reading codes:
- icmpv6_autoconfig: Call net_unlock before return
- pkt_sendmsg: Return error for types other than SOCK_RAW
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
When a task needs to send data, a callback is allocated and the
transmission is happening in a worker task through devif_send.
Synchronization between the two tasks (sender & worker) is
achieved by a semaphore.
If devif_send fails, this semaphore was never posted, leaving
the sending task blocked indefinitely. This commit fixes this
by checking the return code of netif_send, and posting this
semaphore in case of failure.
Polling then stops, and execution is resumed on the sending
task.
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
