During the autoconfig process, if the user modifies the link local
address while waiting for the Router Advertisement message, a crash will
occur when sending the ICMPv6 Neighbor Advertisement message because
netdev_ipv6_lladdr returns NULL.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
optimize the current code format according to the previous net_xxx_wait
implementation to reduce multiple calls of similar code
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
reduce the execution consumption of irrelevant code
testing the TX rates of TCP and UDP based on the Infineon board can
increase them by 13%.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
UDP and PKT will hold the dev lock and conn lock when calling back the
protocol stack from the network dirver. At this time, if the poll_notify
notifies usrsock_server and executes poll_teardown, a conn double lock
will appear. so we changed the lock to a recursive lock
sched_dumpstack
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/Libs/libc/sched/sched_dumpstack.c:71
__assert
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/libs/libc/assert/lib_assert.c:49
nxsem_wait_slow
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/semaphore/sem_wait.c:102 (discriminator 1)
nxmutex_lock
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/include/nuttx/mutex.h:514
udp_pollteardown
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:278
usrsock_rpmsg_poll_setup
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1232
usrsock_rpmsg_poll_cb
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1299
poll_notify
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_poll.c:296
udp_poll_eventhandler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:105
devif_conn_event
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/devif_callback.c:481
udp_callback
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_callback.c:324
udp_input_conn
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_input.c:150
ipv4_in
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:425
ipv4_input
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:533
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
file_writev_compat
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_write.c:89
rpmsgdev_write_handler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/misc/rpmsgdev_server.c:354
rpmsg_virtio_process_rx_buffer
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:256
rpmsg_virtio_rx_worker
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:291
work_dispatch
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:233
work_thread
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:293
nxtask_start
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/task/task_start.c:99
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Our net socket connection allocations are powerful but redundant
because they're implemented once in each protocol. This is not good for
further optimizing and extending to other allocations, so maybe we can
add a common implementation for the usage.
Impact:
1. We add a `struct net_bufpool_s` as pool descriptor, which may use a
little bit more memory than previous implementation (~28Bytes).
2. We share same functions between pools, so code size may shrink under
some scenarios.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
When CONFIG_NETDB_RESOLVCONF is enabled, CONFIG_NETDB_DNSSERVER_NAMESERVERS
will undefined, could cause net/icmpv6/icmpv6_input.c build error.
just add one nameserver to avoid overwrite ipv4 nameserver.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Otherwise, the IP address is always considered to conflict, and the ipv6
address cannot be effectively obtained.
Later we will look at how to perform conflict detection on L3 network cards
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Fix minor problems when reading codes:
- icmpv6_autoconfig: Call net_unlock before return
- pkt_sendmsg: Return error for types other than SOCK_RAW
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The `xxx_ipv6multicast` function in each driver is not adapted to
multiple IPv6 addresses yet, and they're redundant, so try to take them
into common code.
Change:
1. Add MAC `g_ipv6_ethallnodes` and `g_ipv6_ethallrouters` in
`icmpv6_devinit` and call them in `netdev_register`
2. Add multicast MAC for Neighbor Solicitation when adding any IPv6
address, and remove them when IPv6 address is removed
3. Select `NET_MCASTGROUP` when `NET_ICMPv6` because now we need
`d_addmac` when we have ICMPv6
Note:
We want modules outside net stack to call functions like
`netdev_ipv6_add` and never touch the related MAC address, so these MAC
functions are added as internal functions to `net/netdev/netdev.h`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Previously ipv6 multi-address support decided packet source
address based on its destination. This doesn't work if NuttX
device has multiple addresses within same subnet.
Instead when a packet is a response to existing connection,
the source address should be based on the destination address
used in the received packet.
- When receiving Router Advertisement Message, if Managed Address
Configuration flag is set, we should ignore the Autonomous
Address-configuration flag, and obtain the IPv6 address via the
stateful process.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
When implementing IPv6-related logic, we found the `net_ipv6_pref2mask`
and `net_ipv6addr_copy` are using different argument order:
```
net_ipv6addr_copy(ifaddr->addr, addr);
net_ipv6_pref2mask(preflen, ifaddr->mask);
```
Change the order to:
```
net_ipv6addr_copy(ifaddr->addr, addr);
net_ipv6_pref2mask(ifaddr->mask, preflen);
```
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Both IPv6 addresses and net masks should be stored in network byte
order
2. Fix last 2 bytes of mask applying (although it seldom triggers)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Allows setting the advertised route lifetime, and also to set
it to 0 for advertising only the prefix.
From RFC4861:
A router might want to send Router Advertisements without advertising
itself as a default router. For instance, a router might advertise
prefixes for stateless address autoconfiguration while not wishing to
forward packets. Such a router sets the Router Lifetime field in
outgoing advertisements to zero.
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
