optimize the current code format according to the previous net_xxx_wait
implementation to reduce multiple calls of similar code
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
reduce the execution consumption of irrelevant code
testing the TX rates of TCP and UDP based on the Infineon board can
increase them by 13%.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
UDP and PKT will hold the dev lock and conn lock when calling back the
protocol stack from the network dirver. At this time, if the poll_notify
notifies usrsock_server and executes poll_teardown, a conn double lock
will appear. so we changed the lock to a recursive lock
sched_dumpstack
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/Libs/libc/sched/sched_dumpstack.c:71
__assert
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/libs/libc/assert/lib_assert.c:49
nxsem_wait_slow
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/semaphore/sem_wait.c:102 (discriminator 1)
nxmutex_lock
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/include/nuttx/mutex.h:514
udp_pollteardown
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:278
usrsock_rpmsg_poll_setup
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1232
usrsock_rpmsg_poll_cb
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1299
poll_notify
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_poll.c:296
udp_poll_eventhandler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:105
devif_conn_event
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/devif_callback.c:481
udp_callback
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_callback.c:324
udp_input_conn
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_input.c:150
ipv4_in
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:425
ipv4_input
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:533
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
file_writev_compat
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_write.c:89
rpmsgdev_write_handler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/misc/rpmsgdev_server.c:354
rpmsg_virtio_process_rx_buffer
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:256
rpmsg_virtio_rx_worker
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:291
work_dispatch
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:233
work_thread
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:293
nxtask_start
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/task/task_start.c:99
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
When SOL_SOCKET options (e.g., SO_BINDTODEVICE via ping -I) hit ICMP sockets, icmp_{get,set}sockopt logged “Unrecognized ICMP option: 17” before fallback. Handle SOL_SOCKET explicitly by returning -ENOPROTOOPT so psock_* routes to the socket-level handler. Removes noisy logs without changing behavior (invalid devices still return -ENODEV).
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Our net socket connection allocations are powerful but redundant
because they're implemented once in each protocol. This is not good for
further optimizing and extending to other allocations, so maybe we can
add a common implementation for the usage.
Impact:
1. We add a `struct net_bufpool_s` as pool descriptor, which may use a
little bit more memory than previous implementation (~28Bytes).
2. We share same functions between pools, so code size may shrink under
some scenarios.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
ICMP's conn->dev is changing in icmp_sendmsg, when sending to different
address, or when error occurs (like NETDEV_DOWN). Then the poll callback
cannot be dropped from previous dev in free, because the dev is wrong.
So add dev to struct icmp_poll_s just like struct udp_poll_s.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
RFC 1191
When a router is unable to forward a datagram because it exceeds the
MTU of the next-hop network and its Don't Fragment bit is set, the
router is required to return an ICMP Destination Unreachable message
to the source of the datagram, with the Code indicating
"fragmentation needed and DF set". To support the Path MTU Discovery
technique specified in this memo, the router MUST include the MTU of
that next-hop network in the low-order 16 bits of the ICMP header
field that is labelled "unused" in the ICMP specification [7]. The
high-order 16 bits remain unused, and MUST be set to zero. Thus, the
message has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 3 | Code = 4 | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| unused = 0 | Next-Hop MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Internet Header + 64 bits of Original Datagram Data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC 1185
Packet Too Big Message
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| As much of invoking packet |
+ as will fit without the ICMPv6 packet +
| exceeding 576 octets |
IPv6 Fields:
Destination Address
Copied from the Source Address field of the invoking
packet.
ICMPv6 Fields:
Type 2
Code 0
MTU The Maximum Transmission Unit of the next-hop link.
Description
A Packet Too Big MUST be sent by a router in response to a packet
that it cannot forward because the packet is larger than the MTU of
the outgoing link. The information in this message is used as part
of the Path MTU Discovery process [RFC-1191].
Signed-off-by: wangchen <wangchen41@xiaomi.com>
SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
The priorities for finding a network adapter are as follows:
1. if laddr is not ANY, use laddr to find device;
2. if laddr is ANY, and bound index is not 0, use bound index
to find device;
3. if laddr is ANY and no device is bound, use raddr to find
device.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
