optimize the current code format according to the previous net_xxx_wait
implementation to reduce multiple calls of similar code
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
reduce the execution consumption of irrelevant code
testing the TX rates of TCP and UDP based on the Infineon board can
increase them by 13%.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This reverts commit 696a94c8055dc59933457e8ce5c3c91dbecab980
first, when continuous ping from tester to vela, if ignore arp expire when ping response use arp_out to build L2 layer, this cause TC13 testing arp entry expire feature failed. second, the patch of support queue iob when arp_out failed can fix this bug.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
arp_out will replace the dev->d_iob to arp request if the iob destination
address is not exist in arp table, this mechanism cause this iob lost
result in first received ping no response or first synack retransmit.
to fix this bug, we queue the iob if arp_out failed, allocate a new
iob to send arp request, after the arp request completed, then we retry
send the queue iob packet.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
Improve the behavior of the ARP table so that the manually configured
ARP table has the highest priority, can only be manually modified to
other values, otherwise will never change again, and will not time out.
The modified behavior is consistent with that of Linux.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
if update is called after tx, in an environment with very low
latency (such as a simulator), the received arp_response will
be overwritten by update (NULL), resulting in arp learning success,
but the packets are always not sent correctly and are converted
into arp packets.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Wait a fixed number of milliseconds before sending a retry ARP request for the same destination if the IP address mapping is not exist to prevent ARP flooding
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
when a arp response reached, it should notify all tasks waiting the address. if the address is unreachable, do not send arp request to prevent arp flooding.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
there is no need to call arp_out again to perform layer 2 header filling
in the arp_send process, so we should directly call the driver's callback.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
the same variable type in linux is char, in order to avoid modifying
the third-party library code when porting the third-party library code.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
If arp search fails once, subsequent searches for the ip will directly
return failure, and sends an asynchronous arp request to try to update
arp table in the future. In this way, the psock_sendmsg interface will
not block for a long time each time because arp cannot be obtained.
This scenario is triggered when a udp socket frequently attempts to
access an ip address that does not exist on the LAN.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly
Signed-off-by: chao an <anchao@xiaomi.com>
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
