clock_systime_timespec() always returns 0, so there is no need to
check the return value in the caller code, let us remove the return
value directly.
Signed-off-by: chao an <anchao.archer@bytedance.com>
Supports these Maxim/Analog Devices eeproms with a scratchpad:
DS2430,2431,2432,2433,28E04,28E07,28EC20.
For each type of an eeprom, you create a new driver.
Other than that, the driver is file oriented and supports seeks,
for example.
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
This commit introduces 2 new fields in the onewire_master_s struct:
uint64_t selected_rom,
uint64_t *available_roms.
The key point behind this is to allow onewire_search to capture all
devices on the bus into the kernel struct. While this commit is keeping
the old API (for the sake of not messing everything up), you don't have
to reimplement the search of all roms in very strange ways
(such as custom callbacks into the userspace).
Instead of that, a generic ioctl (only a function to be called from
the device driver) was implemented, that searches
the bus (for a particular 1wire family), saves it and then copies it
in a standard way to your application. The ioctl is called
ONEWIREIOC_GETFAMILYROMS.
Also as 1wire can interface multiple devices, a API telling the
driver which ROM to interface was missing, this commit fixes
this with the ONEWIREIOC_SETROM call.
The example usage is you first get all the devices on the bus
using ONEWIREIOC_GETFAMILYROMS. In your application, you choose
the correct device you want to talk to. Then you call
ONEWIREIOC_SETROM. And then writes, reads, ...
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
The wdog implementation redefined `list_node`, which could cause
conflicts or unexpected behavior when both `wdog/wdog.h` and
`list.h` are included in the same source file. This patch removes
the redundant definition to avoid such issues.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Add crc8rohcincr() function to support byte-by-byte CRC8 calculation
using the ROHC polynomial (0x07) without XOR inversions. This is
useful for protocols that require incremental CRC accumulation,
such as GSM 07.10 (CMUX), where the CRC must be computed as frames
are parsed from circular buffers.
Changes include:
- New crc8rohcincr() function for single-byte incremental CRC
- Function takes current CRC value and returns updated CRC
- Uses same g_crc8_tab table as other ROHC functions
- No XOR inversions applied for proper accumulation
This allows protocols like CMUX to replace local CRC table
implementations with standard libc CRC functions while maintaining
correct incremental calculation behavior.
Signed-off-by: Halysson <halysson1007@gmail.com>
move both suspned and resume logic to nxsched_switch_context
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
After irq_dispatch finished, the interrupt stack will be checked to
determine whether overflow occurs.
The relevant configuration reuses the configuration of stack overflow
detection during context switching.
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Update the parameter names of the macro `list_for_every_entry_continue()`
to maintain consistent naming:
- list => entry
- head => list
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Many times, context switching does not occur when the thread stack
memory is almost exhausted, so we need to mofify up_check_tcbstack to
accurately detect it.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Replace all nxsched_suspend/resume_*** with nxsched_switch_context
Delete nxsched_resume_scheduler in up_exit and call it uniformly in task_exit
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Currently the mdio communication is part of the monolithic 'full netdevs'.
This commit serves as an way to add modularity for the netdevs drivers.
A new upperhalf/lowerhalf mdio device comes with this commit that manages the data transfer ofer mdio interface.
Signed-off-by: Luchian Mihai <luchiann.mihai@gmail.com>
This commit fixes the incompatible pointer type issue due to
incompatible types of the `bitexchange_t` callback.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
In certain cases, when the event-wait thread is awakened,
it needs to know the specific mask bit that triggered it,
so that it can branch to different paths accordingly.
This patch introduces the nxevent_getmask function to address this requirement.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Curernt implementation default semaphore max allowed value to SEM_VALUE_MAX.
In some cases, user may want to change this, so provide a function to do this: sem_setmaxvalue
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
There are cases that users do not want the event wait object to be allocated automatically
in the stack as a temporary varialbe in nxevent_tickwait, since multiple threads will
access the varialbe, they want to allocate the object as a global variable for safety
control or easy debug. To solve this problem, this patch add a new function nxevent_tickwait_wait
implementation to give user the chance to pass the global wait object to it.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Add driver for the LAN865x 10BASE-T1S SPI MAC-PHY.
The driver is a lower-half driver to the OA-TC6 base driver.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
Add driver for the Onsemi NCV7410 10BASE-T1S SPI MAC-PHY.
The driver also works for the NCN26010, which is an identical chip.
The driver is a lower-half driver to the OA-TC6 base driver.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
Add base driver common for OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface (OA-TC6)
protocol SPI MAC-PHYs.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
This is an I2C driver for the Awinic AW9523B I/O expander. As well
as the supporting usual digital I/Os, this device features the
ability to drive LEDs directly, and can control the drive current
to each LED individually. The driver was derived from the PCA9555
driver, provides all the standard interfaces of an i/o expander
driver. It also features support for the special features of the
AW9523B through pin direction IOEXPANDER_DIRECTION_OUT_LED and
IOEXPANDER_OPTION_NONGENERIC with AW9523B_OPTION_* options.
The driver has a number of configurable features including interrupt
handling and a shadow register mode based on the PCA9555 driver,
plus new LED/dimming support.
Testing was done using an ESP32S3 host and I2C connection to the
Adafruit AW9523 breakout board.
Signed-off-by: Zik Saleeba <zik@zikzak.net>
Add mdio_phy_id_c45 macro. This macro allows encoding of additional information
needed for MMD access into the phy_id field of the mii_ioctl_data_s structure.
This macro is intended for use by user applications.
Add macros for decoding the phy_id encoded with the mdio_phy_id_c45 macro.
These macros are intended for use by network drivers implementing
SIOCxMIIREG commands.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
This commit implements a set of commands to the i2s character
driver. The implemented commands allows getting and setting
parameters like data width, sample rate and number of channels for
both receiver and transmitter. If no ioctl is found, the command
is redirected to the lower driver implementation if it has the
ioctl callback registered.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
- Added new part support for PCAL6416
- Added pullup/pulldown configuration support
Signed-off-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This commit removes existing support for the NCV7410 10BASE-T1S MAC-PHY.
The driver will be replaced by its generalized version with different organization.
The new driver has naming clashes with the old, therefore the old has to be removed first.
Signed-off-by: michal matias <mich4l.matias@gmail.com>
Add support for pthread_{get|set}concurrency support.
NuttX uses 1:1 threading model (every pthread is a kernel-managed thread),
so this function has no real effect on the scheduling behavior.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Add support for sigsetjmp() and siglongjmp().
This implementation is build on top of setjmp() and longjmp().
sigsetjmp() in that case must be implemented as a macro otherwise
we lose setjmp context.
siglongjmp() is kept as inline function to satisfy the PSE52 VSX
tests requirement.
An alternative implementation requires writing these function in
assembly code for each architecture.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This commit adds simple implementation of guardsize for pthreads.
At this moment this option simply increases the size of allocated pthread stack.
At default pthread guard size is set to 0.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
fix nooptimiziation_function definition problem for tricore gnu compiler
arch/tricore:
move tricore_csa2addr and tricore_addr2csa definition from include/arch.h to include/irq.h to fix build error
Add support for the Texas Instruments TMP112 I2C/SMBus digital
temperature sensor. Also add a new defconfig that includes
support for a TMP112 sensor and extend the existing documentation
to include its description.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
packing the internal substructures will reduce the overall alignment of
`sockaddr_storage` to 2, which triggers an unaligned access warning
in 32-bit systems.
Add an overall 8-byte alignment to the outermost layer of the structure.
Related commit: 855336bf
Refer to https://datatracker.ietf.org/doc/html/rfc2553#section-3.10
Signed-off-by: nuttxs <zhaoqing.zhang@sony.com>
"hmac" was mistyped as "hmca", breaking linking to some prototype
functions. Also, a couple of includes were missing.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
Without c++ standard includes, the <atomic> library is not available.
GCC may use __auto_type for the C-style atomic oprations, and this
is not available for C++. Just define the __auto_type to auto for C++.
Also, the built-in _atomic functions for GCC expect "volatile" parameters
in C, but don't allow that in C++. So selecting the atomic_t and atomic64_t
types according to that.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This commit expands RPC support for the OP-TEE driver using 2 files:
1) drivers/misc/optee_rpc.c
* Add support for RPCs that can be handled directly by the kernel.
* Can delegate RPC handling to optee_supplicant.c for RPCs that
need userspace interaction.
2) drivers/misc/optee_supplicant.c
* Enable communication between the userspace TEE supplicant and the
kernel driver.
Additional changes were needed to the following files:
1) drivers/misc/optee.c
* Add ioctls used SOLELY by the userspace TEE supplicant.
* Register /dev/teepriv0 if the supplicant is enabled in Kconfig
* Add OPTEE_ROLE_CA and OPTEE_ROLE_SUPPLICANT conditionals to
differentiate paths, between a normal Client Application (CA)
and the TEE supplicant.
* Change some functions from static to "public" to reuse them
in other C files.
* Adjust optee_to/from_msg_param() to work with RPCs.
2) drivers/misc/optee_smc.c
* Call the RPC handler from optee_rpc.c
3) drivers/misc/optee_msg.h
* Add definition needed for RPCs
4) drivers/misc/tee.h
* Add ioctl definitions
* Add TEE_SHM_SUPP flag, checked when unregistering supplicant
memory.
5) Documentation/guides/optee.rs
* Add documentation for RPCs and the supplicant.
6) drivers/misc/{CMakeLists.txt, Make.defs}
* Account for the new files.
7) drivers/misc/Kconfig
* Add DEV_OPTEE_SUPPLICANT option to enable/disable the supplicant
driver.
Signed-off-by: Theodore Karatapanis <tkaratapanis@census-labs.com>
The previous approach with memfd has 3 problems:
1) The close operation on the memfd isn't tied with optee_shm_close,
therefore close(fd) doesn't free the optee_shm struct allocated
by the kernel.
2) The kernel unnecessarily maps the file descriptor to its memory,
however only userspace should need to do that.
3) Since the kernel doesn't need to map the file descriptor we
don't need to unmap it.
To use anonymous mapping, the prototype of map_anonymous() was
moved from fs/mmap/fs_anonmap.h to include/nuttx/fs/fs.h. Since
fs_anonmap.h didn't contain any other information it is deleted.
A type from fs/mmap/fs_rammap.h was moved to the public :
include/nuttx/fs/fs.h as well.
Signed-off-by: Theodore Karatapanis <tkaratapanis@census-labs.com>
NVBLK provides a block device that operates on top of a non volatile
memory (as a mtd device) that enables wear levelling for non volatile
memory. It's operation is similar to the dhara wear levelling library,
but nvblk is meant to be used on smaller (nor, mram, rram) memory.
I am also the author and maintainer of the nvblk library.
A block device can be created during startup by using:
```
nvblk_initialize(0, mtd, CONFIG_MTD_NVBLK_DEFAULT_LBS,
CONFIG_MTD_NVBLK_DEFAULT_IOBS,
CONFIG_MTD_NVBLK_DEFAULT_SPEB);
```
and a fat filesystem on top of this as:
```
nsh> mkfatfs /dev/mtdblock0
nsh> mount -t vfat /dev/mtdblock0 /mnt
```
this fat filesystem can then be used:
```
nsh> echo "test" > /mnt/test.txt
nsh> cat test.txt
test
nsh>
```
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
To save more space (equivalent to the size of one erase sector of
MTD device) and to achieve faster read and write speeds, a method
for direct writing was introduced at the FTL layer.
This can be accomplished simply by using the following oflags during
the open operation:
1. O_DIRECT. when this flag is passed in, ftl internally uses
the direct write strategy and no read cache is used in ftl;
otherwise, each write will be executed with the minimum
granularity of flash erase sector size which means a
"sector read back - erase sector - write sector" operation
is performed by using a read cache buffer in heap.
2. O_SYNC. When this flag is passed in, we assume that the
flash has been erased in advance and no erasure operation
will be performed internally within ftl. O_SYNC will take
effect only when both O_DIRECT and O_SYNC are passed in
simultaneously.
3. For uniformity, we remapped the mount flag in mount.h and
unified it with the open flag in fcntl.h. The repetitive
parts of their definitions were reused, and the remaining
part of the mount flag redefine to the unused bit of open
flags.
Signed-off-by: jingfei <jingfei@xiaomi.com>
This commit creates a sbutton device that uses a single button to
create a keyboard driver that returns TAB or ENTER depending how
long the user keeps the button pressed.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Since the ADS1115 has a relative slow conversion rate, this additional
ioctl command makes it possible to trigger a conversion before reading
the reading the conversion result, allowing the user to perform other
computation in between instead of waiting for the conversion time to
complete. It improves sampling time.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
