This commit introduces a software-based fake capture driver that simulates
a 10Hz square wave with 50% duty cycle, enabling development and testing
of capture-related applications without requiring real hardware.
Background:
The capture driver subsystem requires hardware support (timers with input
capture functionality) to measure external signal frequency and duty cycle.
During development, testing, or on platforms without capture hardware, it's
difficult to develop and test applications that use the capture API.
Problem:
Without a fake/simulator driver:
- Developers cannot test capture applications without specific hardware
- Continuous Integration (CI) systems cannot run capture-related tests
- Applications cannot be developed on platforms lacking capture hardware
- Testing edge notification features requires complex hardware setup
- Difficult to reproduce specific timing scenarios for debugging
Solution:
This commit provides a software-simulated capture driver that generates
predictable capture events using a watchdog timer. The fake driver
produces a square wave signal at 10Hz frequency with 50% duty cycle,
allowing applications to test the full capture API without hardware.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This patch adds a dummy PTP clock driver implementation that provides
a software-based PTP clock for testing and development purposes.
Key changes include:
1. Dummy PTP clock driver implementation:
- Added drivers/timers/ptp_clock_dummy.c
- Provides software-based PTP clock using system monotonic clock
- Implements all required lower-half driver operations
2. Lower-half driver operations:
- adjfine: Frequency adjustment (stores adjustment value)
- adjtime: Time offset adjustment (applies delta to base time)
- gettime: Returns current PTP clock time
- settime: Sets PTP clock time
- getcaps: Reports clock capabilities (1 billion PPB max adjustment)
- getcrosststamp: Provides system/device cross-timestamp
3. Driver initialization:
- Added ptp_clock_dummy_init() in drivers/drivers_initialize.c
- Auto-registration under CONFIG_PTP_CLOCK_DUMMY configuration
- Creates /dev/ptp0 character device node
4. Build system integration:
- Added CONFIG_PTP_CLOCK_DUMMY Kconfig option (depends on PTP_CLOCK)
- Updated CMakeLists.txt and Make.defs
- Added include/nuttx/timers/ptp_clock_dummy.h header
5. Implementation details:
- Uses clock_gettime(CLOCK_MONOTONIC) as time base
- Tracks time offset and frequency adjustment internally
- Suitable for testing PTP clock applications without hardware
This dummy driver enables development and testing of PTP clock applications
on platforms without dedicated PTP hardware support.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This patch introduces the foundational PTP (Precision Time Protocol) clock
driver framework for NuttX, enabling precise time synchronization support
based on IEEE 1588 standard.
Key changes include:
1. New PTP clock driver infrastructure:
- Added drivers/timers/ptp_clock.c implementing upper-half driver
- Created include/nuttx/timers/ptp_clock.h with PTP clock interfaces
- Implemented upper/lower half driver architecture for hardware abstraction
2. Core functionality:
- Clock time get/set operations (gettime, settime)
- Frequency adjustment support (adjtime, adjfine)
- Phase adjustment capabilities
- System-device cross-timestamping for precise synchronization
3. IOCTL commands:
- PTP_CLOCK_SETTIME/GETTIME for time manipulation
- PTP_CLOCK_GETRES for resolution queries
- PTP_CLOCK_ADJTIME for time adjustment
- PTP_CLOCK_GETCAPS for capability queries
- PTP_SYS_OFFSET* for system offset measurements
4. Supporting structures:
- struct ptp_lowerhalf_s: lower-half driver interface
- struct ptp_clock_caps: clock capabilities descriptor
- struct ptp_sys_offset: system time offset measurement
- Added timex structures in include/sys/timex.h for ADJ_* operations
5. Build system integration:
- Added CONFIG_PTP_CLOCK Kconfig option
- Updated CMakeLists.txt and Make.defs
- Added PTPCLK debug macros in include/debug.h
This framework provides the base for PTP clock implementations, allowing
hardware-specific drivers to register and provide precise time services
through a standardized interface.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
drivers/timers/arch_timer.c: implement timer arch API on top of timer driver interface
drivers/timers/arch_alarm.c: Implement alarm arch API on top of oneshot driver interface
drivers/timers/arch_rtc.c: Implement RTC arch API on top of RTC driver interface
include/nuttx/timers/rtc.h: Extend struct rtc_time by adding tm_nsec if RTC supporst hiresolution time.
