Updates the SPI Flash driver used for user storage MTD.
Moves ESP32 and ESP32S3 to use common driver.
Updates KConfig options to keep backwards compatibility.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
occurring during compilation and linking phase when the configuration
(CONFIG_ESP32S3_APP_FORMAT_LEGACY=y) is enabled.
---
undefined reference to _esp_system_init_fn_array_start
undefined reference to _esp_system_init_fn_array_end
undefined reference to __init_array_start
undefined reference to __init_array_end
---
Signed-off-by: nuttxs <zhaoqing.zhang@sony.com>
Adds SYS_STARTUP_FN which calls constructors and init functions on
common source code. Requires compatibility changes on linker script.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This commit adds sections used by the debugger and disassembler to
get more information about raw data present in the code.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit sets the coexiram (from libcoexist.a) sections on IRAM.
Before this commit, no other rules matched such sections and the
sections could be placed outside markers that denote the end of the
text sections, causing unexpected errors.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Update the wireless symbols from ESP32_* to ESPRESSIF_* for using common layer.
Remove ESP32 specific WiFi files and edit build system to use common layer.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit ensures that RTC data is properly allocated in the RTC
segment in the linker. This fixes the reported problem about using
the legacy bootloader and RTC.
Update internal reference to get the most updated Espressif's
libraries. Those libraries are based on branch `release/v5.1` of
the ESP-IDF and include `v5.1.4` version of it.
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This commit updates the Wi-Fi and the BLE driver of ESP32. Most of
the changes rely on using the common sources and header files for
xtensa-based Espressif's SoCs.
The new Wi-Fi driver supports WPA3-SAE for both Station and SoftAP
mode. BLE's coexistence mode was enhanced according to the latest
libraries.
Please note that other sources required minor changes in order to
be compatible with the common sources.
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
It also makes the code look more similar to the ESP32-S3 SPI flash
implementation by creating a common `esp32_spiflash_init` that is
responsible to create the SPI flash operation tasks. The function
intended to initialize the SPI flash partions was, then, renamed to
`board_spiflash_init`.
This commit aims to enable the use of ROM functions on ESP32.
This is done by creating the required syscall stubs table and adding the missing symbols to the linker script.
